Page 1
M E E T T H E OT H E R
A
65x25.5x35 cm
C
50x25.5x35 cm
E
20x25.5x35 cm
B
35x25.5x35 cm
D
25x25.5x75 cm
shelf
1 pc
shelf adjuster
1 pc*
A S S E M B L I N G I N S T R U CT I O N S
L E T ’ S G E T S TA RT E D !
( check if all parts are in the box )
frame
1 pc
hex screws
2 pcs
screws
2 pcs
printed on recycled paper, of course
allen key
(included)
*note : SHELF A and C has 2 adjusters
B, D and E have only 1
TOOLS YOU NEED TO PREPARE
marker / pencil
screwdriverdrill
wall plugs
Page 2
A S S E M B L I N G & H A N G I N G
H A N G I N G M U LT I P L E
M A K E I T E A S Y, U S E T H E T O O L K I T
STEP 1
STEP 2
A
Screw the shelf in its frame as pictured
above, then tighten the screws (A)
note: SHELF B, D and E have only 1 adjuster
Place the adjuster(s)
STEP 3 STEP 4
A
Use the tee to align the SHELFMATES
to each other horizontally and vertically.
T HA NK S
for
choosing
Pierce the centre of the cross marks to drill your holes in the right place.
A
B
1. Cut out the measurement Tee (A)
and use the inside of the box as
a drill hole template (B)
2. Pierce the drill marks, position the box
and transfer the marks to the wall
3. Drill holes at the marked spots
Attach screws to the wall. Hang the SHELF and
fine tune with adjuster(s) (A)
Congratulations!
Your SHELF is ready
4. Screw the screw into the wall
(use plugs if necessary)
More hanging tips on our website.
S PAC I N G
Use the Tee to position the SHELF modules
towards each other horizontally and vertically
Loading...