DB Drive SA600.4, SA800.4, SA1300.1D, SA1600.4, SA1600.1D User Manual

Due to continuous improvement of the product the Specifications are subject to change without notice.

SA600.4, SA800.4, SA1600.4

SA1300.1D, SA1600.1D, SA2000.1D, SA3000.1D

AMPLIFIERS

LIMITED WARRANTY

DB Drive warrants any products purchased in the U.S.A.
from an authorized DB Drive dealer. All products are warranted to
be free from defects in material and workmanship under normal
use and service for a period of two (2) years when the unit is
installed by an authorized DB Drive dealer. Non-authorized dealer
installed products carry a one (1) year parts and labor limited
warranty. This warranty applies to the original purchase only.

DB Drive will either repair or replace (as its option) any
unit that had been found to be defective and under warranty
provided the defect occurs within:

Two (2) years, if purchased through an authorized DB Drive
dealer with original proof of purchase.

This limited warranty periods do not extend to units having been
subjected to misuse, abuse, neglect, or accident. Products that in
DB Drive’s judgment shows evidence of having been altered,
modified, or serviced without DB Drive’s authorization, will be
ineligible under this warranty.

To obtain warranty services please contact your retailer or visit
our website at www.dbdrive.net for more details.

Low Impedance Stability

SA 600.4 - 2 Ohm Stereo (4 Channel)
SA 800.4 - 2 Ohm Stereo (4 Channel)
SA 1600.4 - 2 Ohm Stereo (4 Channel)

SA 1600.1D - 1 Ohm Mono

SA 1300.1D - 1 Ohm Mono
SA 2000.1D - 1 Ohm Mono

SA 3000.1D - 1 Ohm Mono

Bass Boost

For added low frequency performance the amplifiers are equipped with a selectable 6dB-12dB
bass boost @ 45Hz

The DB Drive 4 Channel ampliers (SA 600.4 , SA 800.4 and SA 1600.4) feature a selectable slope
crossover network. Channels 1 and 2 are 12dB slope for the Highpass setting and Channels 3
and 4 feature a selectable 12dB slope on the Highpass setting or 24dB slope on the Lowpass /
Bandpass setting.