DB Drive Okur K5 10D4v2, Okur K5 12D4v2, Okur K5 15D4v2, okur K4 10D4, okur K4 10D2 Installation Instructions & Owner's Manual

okur

Please Note: Our suggested box volumes are given as internal air requirements

Recommended Enclosures

Installation Instructions / Owner’s Manual

DB Research L.L.P.

302 Hanmore Industrial Parkway // Harlingen, TX 78550
ph: 877.787.0101 // fx: 956.421.4513 // www.dbdrive.net

®

MODEL

K5 10D4v2 / K5 12D4v2 / K5 15D4v2

Sealed Enclosure

Box Volume .89cu ft.

Ported Enclosure

Box Volume 1.42cu ft.
Box Tuning 39Hz
Port Diameter 4in
Port Length 14in

K5 10D4v2

Sealed Enclosure

Box Volume 1.25cu ft.

Ported Enclosure

Box Volume 1.57cu ft.
Box Tuning 39Hz
Port Diameter 4in
Port Length 12in

K5 12D4v2

Sealed Enclosure

Box Volume 1.54cu ft.

Ported Enclosure

Box Volume 2.75cu ft.
Box Tuning 39Hz
Port Diameter 6in
Port Length 13in

K5 15D4v2

144mm/5.67in

230mm/9.06in

257mm/10.12in

156mm/6.14in

311mm/12.24in

280mm/11.02in

182mm/7.17in

388mm/15.28in

352mm/13.87in

sealed ported

INTRODUCTION

Congratulations on your purchase of a DB Drive state-of-the-art subwoofer compo­nent. Your selection of a DB Drive car audio product indicates a true appreciation of
fine musical reproduction. Whether adding to an existing system or including a DB
Drive subwoofer in a new system, you are certain to notice immediate performance
benefits.

PRODUCT SPECIFICATIONS

KEEP YOUR SALES RECEIPT

Take this time to attach your sales receipt to the manual and put in a safe place. In
case of any unforeseen reason this product may need warranty service, your receipt
will be necessary to establish purchase date. For detailed warranty information
please refer to enclosed warranty card.

RECOMMENDATION

WARNING!

A speaker’s performance is only as good as it’s enclosure. Proper installation,
enclosure size and crossover frequency will maximize the overall performance of
the subwoofer. To properly design and build an enclosure, knowledge of wood­working as well as the proper tools are required. We highly recommend that you
have your enclosure built by an authorized DB Drive retailer. However, if you decide
to install it yourself, we have included the parameters of each driver and recom­mended enclosure sizes. If after reviewing the enclosed information you have any
addition questions, please feel free to contact our technical dept.

CALCULATING ENCLOSURES

It is difficult to give exact box dimensions that are universal for all cars and trucks.
It is for this reason that you must be able to calculate the space in which you have
available in order to achieve the proper air volume required.

It is recommended to build your enclosure from 3/ 4” thick MDF (medium density
fiberboard). Make sure the enclosure is sealed airtight.

Calculating External Volume

1.) To calculate box volume, measure the outside Width x Height x Depth of
the enclosure. Example 12” x 14” x 9”=1512 ÷ 1728” Cubic feet

2.) Next you must convert cubic inches into cubic feet. To do this, you must
divide the cubic inches total by 1728”. Example 1512 ÷ 1828=.875 Cubic feet

Calculating Internal Volume

1.) To calculate the internal (net) volume of the above box you must first multiply
the thickness of the wood you are using by Two(2). Example 3/4” x 2= 1.5“

2.) Next subtract 1.5 from each of the outside measurements of the box.
Width Height Depth
12 - 1.5 = 10.5 14 - 1.5 = 12.5 9 - 1.5 = 7.5

3.) Multiple the new totals (H x W x D) Example: 10.5 x 12.5 x 7.5 = .5696

4.) Next you must convert cubic inches into cubic feet. To do this, you must
divide the cubic inch total by 1728”. Example 984.375 ÷ 1728=.5696

cubic feet.

Exposure to high pressure levels can cause hearing loss or
damage. Listening to your system at loud levels while driving, will
impair your ability to hear traffic sounds and emergency vehicles.
Use common sense when listening to your system.

While installing your subwoofer enclosure in the vehicle. Securely
fasten it to the frame or floorpan. If the enclosure is not secured
properly, there is danger of it becoming a projectile in a collision.

Due to continuing product improvement, specications and design are subject to change without notice.

(FS)

(Qts.)

(Qms)

(VAS)

(Xmax)

(Re)

(Pe)

(QES)

(Sens)

29.83Hz

0.482

4.343

61.896mM

0.63in

6.19Ω

600/1500

0.543

86.685dB

K5 12D4v2

31.39Hz

0.633

3.67

97.046mM

0.63in

6.26Ω

600/1500

0.765

87.811dB

K5 15D4v2

34.75Hz

0.406

3.429

25.743mM

0.63in

6.14Ω

600/1500

0.461

85.572dB

K5 10D4v2