DB Drive K3 15D4 User Manual
INTRODUCTION
Congratulations on your purchase of a DB Drive state-of-the-art subwoofer component. Your selection of a DB Drive car audio product indicates a true appreciation of
fine musical reproduction. Whether adding to an existing system or including a DB
Drive subwoofer in a new system, you are certain to notice immediate performance
benefits.
PRODUCT SPECIFICATIONS
K3 10D2
30.27Hz
0.37
2.52
K3 12D4
22.88Hz
0.48
4.28
(FS)
(Qts.)
(Qms)
K3 10D4
30.28Hz
0.47
3.67
K3 12D2
22.95Hz
0.39
3.09
K3 15D4
21.27Hz
0.62
3.98
KEEP YOUR SALES RECEIPT
Take this time to attach your sales receipt to the manual and put in a safe place. In
case of any unforeseen reason this product may need warranty service, your receipt
will be necessary to establish purchase date. For detailed warranty information
please refer to enclosed warranty card.
RECOMMENDATION
A speaker’s performance is only as good as it’s enclosure. Proper installation,
enclosure size and crossover frequency will maximize the overall performance of
the subwoofer. To properly design and build an enclosure, knowledge of woodworking as well as the proper tools are required. We highly recommend that you
have your enclosure built by an authorized DB Drive retailer. However, if you decide
to install it yourself, we have included the parameters of each driver and recommended enclosure sizes. If after reviewing the enclosed information you have any
addition questions, please feel free to contact our technical dept.
WARNING!
Exposure to high pressure levels can cause hearing loss or
damage. Listening to your system at loud levels while driving, will
impair your ability to hear traffic sounds and emergency vehicles.
Use common sense when listening to your system.
While installing your subwoofer enclosure in the vehicle. Securely
fasten it to the frame or floorpan. If the enclosure is not secured
properly, there is danger of it becoming a projectile in a collision.
Due to continuing product improvement, specications and design are subject to change without notice.
(VAS)
(Xmax)
(Re)
(Pe)
(QES)
(Sens)
32.73L
0.97in
7.64Ω
450/900
0.53
84.18dB
31.19L
0.97in
3.83Ω
450/900
0.44
84.80dB
88.68L
0.97in
7.62Ω
450/900
0.54
84.83dB
84.66L
0.97in
3.83Ω
450/900
0.45
85.45dB
185.47L
0.97in
7.63Ω
450/900
0.73
85.70dB
CALCULATING ENCLOSURES
It is difficult to give exact box dimensions that are universal for all cars and trucks.
It is for this reason that you must be able to calculate the space in which you have
available in order to achieve the proper air volume required.
It is recommended to build your enclosure from 3/ 4” thick MDF (medium density
fiberboard). Make sure the enclosure is sealed airtight.
Calculating External Volume
1.) To calculate box volume, measure the outside Width x Height x Depth of
the enclosure. Example 12” x 14” x 9”=1512 ÷ 1728” Cubic feet
2.) Next you must convert cubic inches into cubic feet. To do this, you must
divide the cubic inches total by 1728”. Example 1512 ÷ 1828=.875 Cubic feet
Calculating Internal Volume
1.) To calculate the internal (net) volume of the above box you must first multiply
the thickness of the wood you are using by Two(2). Example 3/4” x 2= 1.5“
2.) Next subtract 1.5 from each of the outside measurements of the box.
Width Height Depth
12 - 1.5 = 10.5 14 - 1.5 = 12.5 9 - 1.5 = 7.5
3.) Multiple the new totals (H x W x D) Example: 10.5 x 12.5 x 7.5 = .5696
4.) Next you must convert cubic inches into cubic feet. To do this, you must
divide the cubic inch total by 1728”. Example 984.375 ÷ 1728=.5696
cubic feet.
Recommended Enclosures
K3 10D4 / 10D2
Sealed Enclosure
Box Volume 1.09cu ft.
Ported Enclosure
Box Volume 1.48cu ft..
Box Tuning 39Hz
Port Diameter 4in.
Port Length 16in.
K3 12D4/ 12D2
Sealed Enclosure
Box Volume 1.15cu ft.
sealed ported
Ported Enclosure
Box Volume 1.62cu ft.
Box Tuning 39Hz
Port Diameter 4in.
Port Length 13in.
K3 15D4
Sealed Enclosure
Box Volume 1.74cu ft.
Ported Enclosure
Box Volume 2.88cu ft.
Box Tuning 39Hz
Port Diameter 6in.
Port Length 18in
.
Please Note: Our suggested box volumes are given as internal air requirements
okur
Installation Instructions / Owner’s Manual
MODEL
K3 10D4 / K3 10D2
K3 12D4 / K3 12D2 / K3 15D4
DB Research L.L.P.
302 Hanmore Industrial Parkway // Harlingen, TX 78550
ph: 877.787.0101 // fx: 956.421.4513 // www.dbdrive.net
®
Loading...