DB Drive Euphoria F4100, Euphoria F475, Euphoria M750, Euphoria M2750, Euphoria M1500 User Manual
...
LIMITED WARRANTY
Euphoria warrants any products purchased in the U.S.A.
from an authorized Euphoria dealer. All products are warranted to
be free from defects in material and workmanship under normal
use and service for a period of two (2) years when the unit is
installed by an authorized Euphoria dealer. Non-authorized
dealer installed products carry a one (1) year parts and labor limited warranty. This warranty applies to the original purchase only.
Euphoria will either repair or replace (as its option) any
unit that had been found to be defective and under warranty
provided the defect occurs within:
Two (2) years, if purchased through an authorized Euphoria
dealer with original proof of purchase.
This limited warranty periods do not extend to units having been
subjected to misuse, abuse, neglect, or accident. Products that in
Euphoria’s judgment shows evidence of having been altered,
modified, or serviced without Euphoria’s authorization, will be
ineligible under this warranty.
To obtain warranty services please contact your retailer or visit
our website at www.euphoriacaraudio.com for more details.
USER MANUAL
Installation Instructions | Owners Manual
Due to continuous improvement of the product, specifications are subject to change without notice.
www.euphoriacaraudio.com
F475 : F4100
M750 : M1500 : M2250 : M2750
www.euphoriacaraudio.com
Low Impedance Stability
F475 - 2 Ohm Stereo (4 Channel)
F4100 - 2 Ohm Stereo (4 Channel)
M750 - 1 Ohm Mono
M1500 - 1 Ohm Mono
M2250 - 1 Ohm Mono
M2750 - 1 Ohm Mono
Bass Boost
The DB Drive Euphoria Mono amplifiers feature a variable Bass Boost gain centered at 45Hz that
enables the user to adjust the amount of bass boost needed to achieve the desired amount of low
end response from the subwoofer system.
The DB Drive Euphoria 4 channel amplifiers (F475 & F4100) feature a variable 12dB
slope High Pass crossover for channels 1 and 2. Channels 3 and 4 feature a selectable 3
way 12dB Variable crossover that enable the user to select High Pass, Band Pass or Low
Pass settings.
Loading...