d&b audiotechnik Z5576.050 User Manual

D

Z5576.050
Manual 1.1 en

d
u
c
t

General information

Z5576.050 Manual

Version: 1.1 en, 04/2018, D2029.US .01

Copyright © 2018 by d&b audiotechnik GmbH; all rights
reserved.

Keep this manual with the product or in a safe place
so that it is available for future reference.

We recommend you to regularly check the d&b website for the
latest version of this manual.

When reselling this product, hand over this manual to the new
owner.

If you supply d&b products, please draw the attention of your
customers to this manual. Enclose the relevant manuals with the
systems. If you require additional manuals for this purpose, you
can order them from d&b.

d&b audiotechnik GmbH
Eugen-Adolff-Str. 134, D-71522 Backnang, Germany
T [phone], F [phone]
[e-mail], www.dbaudio.com

1. Z5576.050 D80 Touring rack assembly 18 RU -

NEMA...................................................................................... 4

1.1. Intended use............................................................................... 4

1.2. Scope of supply......................................................................... 5

2. Handling, cooling and placement................................ 6

2.1. Handling..................................................................................... 6

2.2. Cooling and placement............................................................. 6

3. Z5577.001 Mains power distributor 2 x

30 A NEMA............................................................................ 8

3.1.

Intended use............................................................................... 8

3.2. Front panel................................................................................. 8

3.2.1. MAINS IN.............................................................................. 8

3.3. Rear panel.................................................................................. 9

3.3.1. AUXILIARY MAINS OUTPUTS.............................................. 9

4. Z5578 LS connector panel 6 x NL8 /

2 x LKA25............................................................................ 10

4.1.

Intended use............................................................................ 10

4.2. ETH/POE INCLINOMETER.................................................... 10

4.3. 4 CH OUTPUTS....................................................................... 11

4.4. 12 CH OUTPUT...................................................................... 11

5. DS10 and I/O panel........................................................ 13

5.1.

DS10 configurations............................................................... 13

5.2. I/O panel................................................................................ 14

5.2.1. INPUT section....................................................................... 14

5.2.2. INPUT LINK section............................................................. 14

5.2.3. REMOTE section.................................................................. 14

5.3. Z5333 Rack Link..................................................................... 15

6. Rack wiring diagrams.................................................... 16

Contents

d&b Z5576.050 Manual 1.1 en 3

1.1. Intended use

The d&b Z5576.050 D80 Touring rack assembly NEMA is
intended for large scale mobile sound reinforcement applications.
It is designed as a closed and prewired 18 RU system rack,
providing mains power distribution and connector interfaces for 6
x D80 amplifiers.

For this purpose, the touring rack is equipped with a 2 x 30 A
NEMA mains power distribution device (Z5577.001) as well as a
loudspeaker connector panel (Z5578).

In addition the Z5578 loudspeaker connector panel incorporates
a POE (Power Over Ethernet) enabled etherCON® (RJ 45)
connector for the direct connection of an inclinometer.

Also incorporated is an I/O panel (Z5338), which serves as a
connector interface for both analog and digital audio signals as
well as four network connectors for either Ethernet or CAN-Bus
remote capabilities.

In addition, a d&b DS10 Audio Network Bridge (Z4010) is
included to allow direct connection to the Dante audio network.

1. Z5576.050 D80 Touring rack assembly 18 RU - NEMA

d&b Z5576.050 Manual 1.1 en4

1.2. Scope of supply

Before starting up, please verify the shipment for completeness and
proper condition of the items.

If there is any sign of obvious damage, do not operate the rack
assembly and contact your local dealer from whom you received
the rack assembly.

Pos. Qty. d&b Code Description

[1] 1 Z5576.050 Touring rack assembly 18 RU

NEMA - with shock mounted
19" frame.

Including:

[2] 1 Z5577.001 Mains power distributor

2 x 30 A NEMA.

[3] 1 Z5578.000 LS Connector panel

2 x LKA 25 / 6 x NL8.

[4] 6 Z2710 D80 Amplifier*.

[5] 1 Z5338 I/O Panel.

[6] 1 Z4010 DS10 Audio Network Bridge.

[7] 1 E8106 POE (Power Over Ethernet)

injector device.
(Mounted at the top left rear of
the rack assembly).

[8] 1 Z5333 Rack link cable [8].

D2029.US .01 Z5576.050 Manual.

*To be ordered separately

Dimensions and weight

Height x width x depth

1060 x 600 x 780 mm

41.73 x 23.6 x 30.7"

Total weight (incl. all amps) 210 kg / 463 lb

[7]

[8]

[4]

[1]

[2]

[3]

[5]

[6]

d&b Z5576.050 Manual 1.1 en 5

2.1. Handling

The touring rack is equipped with two sliding doors allowing quick
and easy access to the front and rear panels of the devices.

1. Unlock the both door lock mechanisms.

2. Open the door and ...

3. push the door into its park position.

2.2. Cooling and placement

When using the d&b Z5576.050 Touring rack assembly, make
sure to provide sufficient space of 0.5 m (1.6 ft) at the front and
rear of the touring rack to ensure adequate cooling airflow.

Make sure both the front and rear doors are opened and
pushed into their park position to provide sufficient cooling.

Do not stack Z5576.050 Touring rack assemblies. The rack

assemblies can be positioned side by side.

They can also be combined with Z5330 D80, or Z5560 D20
Touring rack assemblies, either side by side or with a maximum of
one of these Touring racks positioned on top, as shown in the
graphic below (Shown with: Z5330 D80 Touring rack assembly.
The same applies to Z5560 D20 Touring rack assembly.)

2. Handling, cooling and placement

d&b Z5576.050 Manual 1.1 en6

When combining Z5576.050 Touring rack assemblies with Z3010
D12 Touring rack assemblies or any other rack assembly that
produces an opposing airflow, observe the following restrictions:

▪ Do not stack D12 Touring racks or any other rack assemblies

with opposing airflow on top of the Z5576.050 Touring rack.

▪ Z5576.050 D12 Touring rack assemblies can be positioned

side by side.

d&b Z5576.050 Manual 1.1 en 7