dB9PRO dBR-D1 User Manual

dBR-D1 Voice Recorder
dBR-D1 VOICE RECORDER
User Manual
0
dBR-D1 Voice Recorder
Thank you for purchasing this product. This is
1.Precautions
Charging
Protecting Files
Please do not press the power switch to prevent the current recording from being lost during the recording process.
Interference
If placed near other electronic devices, the functions of this device maybe adversely affected. To prevent this, please keep this recorder away
1
dBR-D1 Voice Recorder
from such other devices.
Backup
Transfer of Data
2.Parts and Controls
2
dBR-D1 Voice Recorder
1.Headphone jack
2.Record/Save button
3.Rewind/Previous file button
4. Fast forward/Next file button
5.Volume up button
6.Volume down button
7.Pilot light
8.Screen
9.Pause/Play button
10.Speaker
3
dBR-D1 Voice Recorder
11.USB port
12.Power switch
13.Expansion CARDS
14.Menu button
3.Charging
The power switch on the recorder must be ON. Please connect the recorder to your computer via the USB cable (supplied). Insert the micro USB end of the cable to the recorder, and the USB end to the USB port of a computer which is ON. You may also use a phone charger.
When the recorder is charging, the screen will show the battery charge indicator at the top right.
4
dBR-D1 Voice Recorder
4.Turning Power On
Turn on the power switch and turn on the recorder.
5.Turning Power Off
Slide down the Power switch, and the recorder is switched OFF.
Hint
When the recorder is not in playback mode, and if there is no activity for 5 minutes, the recorder will power off automatically. This is the auto power off function and can be set in the menu under “Auto Switch Off”.
5
dBR-D1 Voice Recorder
6. Record/SAVE
Turn on the recording switch to enter recording
mode.
Place the recorder so that the
built-in microphones face the direction of the source to be recorded.
The new file will be
automatically recorded as the last file in the current folder.
Slide down the “Record/Save
button, in the direction of SAVE to stop and save your
6
dBR-D1 Voice Recorder
recording.
7. Play
Press the key on the side of the device to
switch between the Recording folder/Music folder. Press to play.
Press or button to select the file you
want to playback, and then press ” button to start playing the file.
Press or button to adjust the volume. Press button to Pause play.
7
dBR-D1 Voice Recorder
8. “A-B”Repeat Play
In PLAY mode,
press “ to select A. Once A starts flashing on the screen, press this button again to select B, and then the segment A-B of the file will start repeating.
Once selected, it will repeat and
play back the A-B interval
Press “ again to cancel.
9.Delete
When the recorder
is in standby mode (not playing a file), select the file you want to delete, hold
down or key to enter.
Press " " or " " buttons to
8
dBR-D1 Voice Recorder
select No/Yes/Delete all. Press " " to
confirm your choice.
“No”:Cancel the Delete process. “Yes”:Delete single file. “Delete all”:Delete all files in folder.  Press the button to confirm.  Press to return standby mode.
Note
Once a file has been erased, you cannot retrieve it.
10.MP3 Function
Download music to
the root directory of the machine through USB.
Press to enter
the MP3 player interface.
Play music just like playing a recording file.
11. Recording Settings
In standby mode, hold down "M" button to enter.
For scrolling through the options, press the
9
dBR-D1 Voice Recorder
button to select, press the “M” key to exit.
Press to select the recording settings,
press the to enter.
1) Storage Location
Press " " briefly, then select "memory", "card", and then press " " to save your recording in your preferred location storage. Press "M" to exit.
2) Record type
a. 384K BPS b. 192K BPS c. 128K BPS d. 64K BPS e. 32K BPS
3) Recorder Mode (VOR on/off)
a. Normal Mode
10
dBR-D1 Voice Recorder
b. VOR Mode (Voice Activated Recording)
Note
In VOR mode, if the ambient noise level exceeds
-40dB, the recorder will start recording. If the ambient noise level drops below this threshold, it will stop recording and resume once the threshold is exceeded. If you want to be ready to record at short notice, you can use this feature, keeping in mind the noise threshold.
4) Recording Monitor: Use this feature for live monitoring during a
recording. This feature needs earphones to be used. a.Disable b.Enable
5) Noise Reduction: Here you can set the level of noise reduction you prefer.
6) VOR Level When the sound recording
11
dBR-D1 Voice Recorder
is turned on, it can adjust the level of the input.
7) LED Set a.Close b.Open
8) Record Subsection Based on requirements, recording files can be divided into: 30 minutes, 60 minutes, and all the way upto 360 minutes, in 30 minute increments
12. Screensaver Time
You can scroll through the various
options for this feature using or . Please press to confirm, and press “M to exit.
1) Open
2) 5 S
3) 10 S
4) 20 S
5) 30 S
Save battery charge by selecting screen saver settings.
13.Time Settings
12
dBR-D1 Voice Recorder
You can select and press to confirm,
and press “M” to exit.
1) Press to select the desired position.
2) Press“+/- to adjust the number.
14. Language
Please press to confirm, and
press “M to exit.
1) Scroll through the options and
select your preferred choice.
2) Multi language support
15. Tools
For this function, select the option,
then press the button to confirm, and press the “M” key to exit.
1) Auto Record options: a.Record(Off) b.Record(On)
Note: Your recorder time must be synchronized to the current time zone (see time settings). Timed recording: The power switch must be
ON.
13
dBR-D1 Voice Recorder
Set the time at which you want to
start recording: Record(On) - (sort of like setting an alarm).
To adjust the time at which you would
like the recording to begin, press or to select the hour or minute, and use “+/- to adjust the time. Once it is set, you need to also specify the duration of the recording (Length) in minutes. Once set, at the specified time, the recording will start automatically and once it has reached the specified length, the file will be saved and the recorder will go to sleep mode by itself.
2) Password Switch a.Password Off b.Password On
When you select
Password On”, you can set a password to the device.
3) Password Set
14
dBR-D1 Voice Recorder
adjust the number.
If you have set a password, when you boot with
the connection PC you will need a password.
Please store your password in a safe place. If
you forget the password, enter 9999 and hold down the “ ” key to bypass the password.
16. Auto switch off
a. Close b. 1 Minute c. 5 Minute d. 10 Minute e. 30Minute
f. 60Minute Use the or keys to select your preference in setting the switch off time.
17. Restore factory Settings
All settings are restored to the
default factory settings.
15
dBR-D1 Voice Recorder
18.Copy Files with PC
Connect the Recorder to the PC via the USB
cable. Copy files or folders to your computer.
16
dBR-D1 Voice Recorder
Note
Copy files from the computer to the recorder. Any music files (for mp3 playback on the recorder) must not be put inside the RECORD folder. They should be simply copied to the root directory.
17
dBR-D1 Voice Recorder
Display screen
96*64 LCD screen
Disk Capacity
8GB/16GB/32GB
Product size
4.03 x0.94x0.53 Inches
Weight
2.40 Oz
Recording Format
WAV
Recording Mode
Microphone
WAV
Recording
8GB
16GB
32GB
PCM/384kbps
47hrs
94hrs
188hrs
SHQ
94hrs
188hrs
376hrs
HQ
139hrs
278hrs
556hrs
SP Rec/64kbps
278hrs
556hrs
1112hrs
LP Rec/32kbps
560hrs
1120hrs
2240hrs
Music Format
MP3WAV
Interface
USB2.0
Usage Temperature
0°C~45°C
Power Supply
Built-in lithium polymer
Battery Capacity
1100mAh
Earphone jack
3.5 mm Stereo
Built in speaker
8Ω1W
General Specifications:
18
Loading...