d&b Z5374 User Manual
Z5374
Ti Flying bar
Rigging manual (1.0 EN)
Contents
1. Product description..........................................................3
Intended use.........................................................................................................3
Scope of supply..................................................................................................3
Technical specification.......................................................................................3
2. Safety precautions...........................................................3
General safety....................................................................................................3
Load safety information....................................................................................3
3. Suspension of the Flying bar/array................................4
Dual pickpoint operation and vertical aiming............................................4
Single pickpoint operation and vertical aiming.........................................4
Single pickpoint operation using the d&b Z5147 Rota clamp..............4
4. Setup of the assembly.....................................................5
5. Maintenance and care.....................................................8
6. Disposal............................................................................8
General Information
Z5374 Ti Flying bar
Rigging manual
Version 1.0 EN, 06/2009, D2997.EN .01
Copyright © 2009 d&b audiotechnik GmbH; all rights reserved.
Keep this manual with the product or in a safe place so that it is
available for future reference.
d&b audiotechnik GmbH
Eugen-Adolff-Strasse 134, D-71522 Backnang, Germany
Telephone +49-7191-9669-0, Fax +49-7191-95 00 00
E-mail: docadmin@dbaudio.com, Internet: www.dbaudio.com
Z5374 Ti Flying bar
1. Product description
Intended use
The Z5374 Ti Flying bar must only be used in conjunction with d&b
Ti10L loudspeakers for fixed indoor installations as described in this
manual.
The Ti Flying bar allows up to 8 x Ti10L loudspeaker cabinets to be
flown at any vertical splay angle profile.
Scope of supply
Please verify the shipment for completeness and condition of the items.
Qty. d&b Code Description
Fig. 1:Z5374 Ti Flying bar components
1 Z5374
2
1
3
1 D2997.INT Mounting instructions
Technical specification
Weight.............................................................................................................1.5 kg (3.3 lb)
2. Safety precautions
General safety
Installation and set up should only be carried out by qualified and
authorized personnel observing the valid national "Rules for the
Prevention of Accidents" (RPA).
It is the responsibility of the person installing the assembly to ensure that
the suspension/fixing points are suitable for the intended use.
Always carry out a visual and functional inspection of the Flying bar
before use. In case you have any doubt as to the proper functioning
and safety of the bar, do not use it. Please also refer to section 5.
Maintenance and care on page 8.
Ti Flying bar [1]
Torx lens head screw M5 x 25 [2]
Pullback anchor device [3]
1 t shackle [4]
Load safety information The maximum permitted working load of the Ti Flying bar is 90 kg (198 lb) which corresponds to the weight of up to 8 x Ti10L
loudspeakers.
Z5374 Rigging manual (1.0 EN) Page 3 of 10
Loading...