Dayun CGC4180 Specs Manual

CGC4180

Product Description Picture

The CGC4180 series tractor truck, driven model: 4*2,
can be equipped with 270 hps to 380hps EGR
WEICHAI engine. With 9 or 12 gearshift China FAST
gearbox and Hande axles, the truck can meet long
haulage cargo truck transport at very low cost on fuel
and maintenance. The driver cab, design under
ergonomia engineering, makes the driving a very
pleasure experience. Common rail fuel supply and

EGR aftertreament meet most environmental

standard.

Length x width x height 5985×2490×3410 mm

Wheelbase 3500 mm

Front/ Rear wheel track 2037/1860 mm

Front/ Rear suspension 1430 mm/1055 mm

Total weight/Gross combination weight 18000 kg

Curb weight / Gross vehicle weight 7370 kg

Rate tracting weight 34435 kg

Seat 3

Max.speed ≤90 km/h

Max.gradient ≤30%

Mini.turning radius 15 m

Mini.ground clearance 261.5 mm

Approaching/leaving angle 16°/42°

Engine specification

Model (standard) WP10.290, in-line, 6 cylinder , ECU common- rail

Rate power 213kw (290hp) at 2200r/min

Max.torque 1160N.m at 1200-1600r/min

Emission standard Euro III

Displacement 9.726 Litre

Transmission specification

Gearbox 9JS135B

Clutch DSP430

Steer/ ratio D50 hydraulically power steer

Front Solo axle drum brake, 7.5 Ton

Rear axle 13 Ton 485 type, Main reduction ratio 4.111

Front/Rear suspension steyr suspension

Driving model 4x2

Brake system Compressed air drum brake

transmission shaft 1

Tyre 11.00R20

Fuel tank 350Litre

Safety optional CAF ABS system

Battery 24V,180Amp/h

Cab specification

Cab high top

Air conditioner Optional

Cab upholstery fibre glass , textile

Seat 1+1

Sleep double beds

Body colour Red/ blue,yellow,green,silver,black optional

Optional side cover, central control station,power mirror.

DAYUN HEAVY TRUCKS

Shanxi Dayun Automobile Manufature Co.,Ltd

No. 8 Tongda North Road, Konggang New District, Yuncheng, Shanxi, China

International Trade Centre: No.12 Yongfa Road, Huadu District, Guangzhou, Guangdong, China.

Tel: [phone] Fax:[phone] Email: [e-mail]

TRACTOR TRUCKS

CGC4220

Product Description

Picture

The CGC4220 series truck is driven as 6*2, which is
equipped with 270 hps to 380hps WEICHAI EGR
engine. With 9 or 12 China FAST gearshift gearbox
and Hande axles, the truck can meet long haulage
cargo truck transport at very low cost on fuel and
maintenance. The driver cab, design under ergonomia
engineering, makes the driving a very pleasure
experience. Common rail fuel supply and EGR

aftertreament meet most environmental standard.

Length x width x height 6790×2490×3515 mm

Wheelbase 1800+2500 mm

Front/ Rear wheel track 2037/2037/1860 mm

Front/ Rear suspension 1430/1000 mm

Frame 280×80×(8+5)mm

Totalweight/Grosscombinationweight 22000 kg

Curbweight/Grossvehicleweight 7985 kg

Rate tracting weight 34080 kg

Seat 2

Max.speed ≤90 km/h

Max.gradient ≤30%

Mini.turning radius 15 m

Mini.ground clearance 270mm

Approaching/leaving angle 19.4°/46.5°

Engine specification

Model (standard) WP10.336N, in-line, 6 cylinder , ECU common- rail

Rate power 247kw (336hp)@ 1900r/min

Max.torque 1500N.m @1350-1500r/min

Emission standard Euro III

Displacement 9.726 Litre

Transmission specification

Gearbox 12JSD160TA,12 gears

Clutch DSP430BAOH film spring

Steer/ ratio D50-3411010 hydraulically steered 23:1

Front Solo axle Forged I-beam , drum brake, 7.5 Ton

Rear axle 16 Ton, Main reduction ratio 4.42

Front/Rear suspension Portrait positioned steel plate with stabilization

Driven model 6x2

Brake system Compressed air drum brake

Tyre 11.00R20,

Fuel tank 300 Litre

Battery 24V,180Amp/h

Optional accessory ABS.GPS,Rearview radar, rim cover, Key starter

Cab specificatin

Cab high top

Air conditioner Cool/Heat power: 4.6kw /6.5kw

Cab upholstery fibre glass, ABS, textile

Seat 1+1

Sleep double beds

Body colour Red/blue,yellow,green,silver,black optional.

CGC4251

Product Description

Picture

The CGC4251 series tractor truck can equip with 270

hps to 380hps WEICHAI EGR engine. With 9 or 12

China FAST gearshift gearbox and Hande axles, the
truck can meet long haulage cargo truck transport at
very low cost on fuel and maintenance. The driver cab,
design under ergonomia engineering, makes the
driving a very pleasure experience. Common rail fuel

supply and EGR aftertreament meet most

environmental standard.

Length x width x height 6855×2490×3515 mm

Wheelbase 3200+1350 mm

Front/ Rear wheel track 2037/1860 mm

Front/ Rear suspension 1430/875 mm

Total weight/Gross combination weight 25000 kg

Curb weight / Gross vehicle weight 8840 kg

Rate tracting weight 40000 kg

Seat 2+1

Max.speed ≤90km/h

Max.gradient ≤30%

Mini.turning radius 15 m

Mini.ground clearance 270 mm

Approaching/leaving angle 18°/50°

Engine specification

Model WP10.336N, in-line, 6 cylinder , ECU common- rail

Rate power (standard) 247kw (336hp) at 1900r/min

Max.torque 1500N.m at 1350-1500r/min

Emission standard Euro III

Displacement 9.726 Litre

Transmission specification

Gearbox 12JSD160TA

Clutch DSP430BAOH film spring

Steer/ ratio D50-3411010 hydraulically steered / 23:1

Front Solo axle I beam, drum brake, 7.5 Ton

Rear Tandem axle Hande bridge, 13 Ton, Main reduction ratio 4.42

Front/Rear suspension Portrait positioned, with stabilization lever

steyr suspension

Brake system Compressed air drum brake

Driving axle 2

Driving model 6x4

Tyre 11.00R20

Fuel tank 350 Litre

Battery 24V,180Amp/h

Optional accessory ABS.GPS,Rearview radar, rim cover, Key start

Cab specification

Cab High top

Air conditioner Cool/Heat power: 4.6kw /6.5kw(optional)

Cab upholstery fibre glass

Seat 1+1

Sleep double beds

Body colour silver/Red, blue,yellow,green,black optional

Optional accessary

side air deflector, central control station,power

DYX3250

Product Description

Picture

The DYX3250 series dump truck, driven model: 6*4,
are equipped with 270 hps to 380hps weichai EGR
engine. With 9 or 12 gearshift gearbox and Hande
axles, the truck can meet most rough road condition,
such as coal mine, engineering project and other
cargo truck transport at very low cost on fuel and
maintenance. The driver cab, design under ergonomia
engineering, makes the driving a very pleasure
experience. Common rail fuel supply and EGR

aftertreament meet most environmental standard.

Length x width x height 8435× 2490× 3490 mm

Wheelbase 3800+1350 mm

Front / Rear wheel track 2037/1860 mm

Front /Rear suspension 1430/1855 mm

Container dimension 5800× 2300× 1150 mm

Frame 300(8+7)mm

Total weight/Gross combination weight 25000 kg

Curb weight / Gross vehicle weight 12185 kg

Cargo load weight 12815 kg

Seat 2

Max.speed ≤75

Max.gradient ≤45%

Mini.turning radius 22 m

Mini.ground clearance 270 mm

Approaching/leaving angle 32°/30°

Engine specification

Model

WP10.290 in-line, 6 cylinder , ECU common- rail
technology

Rate power( standard) 213kw (290hp) at 2200 r/min

Max.torque 1160N.m@ 1200-1600 r/min

Emission standard Euro III

Displacement 9.726 Litre

Transmission specification

Gearbox 9JS135+QH70, manual gearbox with 9 gears

Clutch film spring

Inter-cooler up intake/out

Steer /ratio hydraulically power steered

Front Solo axle I-beam, drum brake, 7.5 Ton

Rear Tandem axle 13 Ton, Main reduction ratio 5.73

Front/Rear suspension Portrait positioned parabolic steel plate springs

Driven model 6x4

Brake system Compressed air drum brake

tyre 11.00R20

Fuel tank 300 Litre

Battery 24V,180Amp/h

Cab specification

Cab

Flat top,manual control glass,rearview
mirror,without central control station

Air conditioner Manual/Automatic control

Upholstery Fibre glass, textile/

Seat 1+1

Bed No.

Body Color Orange/Red, blue,green,silver,black optional

DUMP TRUCKS

DYX3311

Product Description

Picture

The DYX3311series dump truck, driven model: 8*4,
are equipped with 270 hps to 380hps weichai EGR
engine. With 9 or 12 gearshift gearbox and Hande
axles, the truck can meet most rough road condition,
such as coal mine, engineering project and other
cargo truck transport at very low cost on fuel and
maintenance. The driver cab, design under ergonomia
engineering, makes the driving a very pleasure
experience. Common rail fuel supply and EGR

aftertreament meet most environmental standard.

Length x width x height 9780× 2490× 3270 mm

Wheelbase 1800+4200+1350 mm

Front/ Rear wheel track 2037/1860 mm

Front /Rear suspension 1430/1000 mm

Frame 300+80+(8+5)mm

Total weight/Gross combination weight 31000 kg

Curb weight / Gross vehicle weight 15120 kg

Rate load 15750 kg

Seat 2

Max.speed ≤110km/h

Max.gradient ≤45%

Mini.turning radius ≤22m

Mini.ground clearance 260mm

Approaching/leaving angle 24°/46°

Engine specification

Model WP10.336N, in-line, 6 cylinder , ECU common- rail

Rate power 247kw(336hp) at 1900r/m

Max.torque 1500N.m @ 1300-1500r/m

Emission standard Euro III

Displacement 9.726 Litre

Transmission specification

Gearbox 9JS150+QH70 with ex-speed gear

Clutch DSP430BAOH

Steer/ ratio D50-3411010 hydraulically power steer

Front Solo axle Twin I-beams, drum brake, 7.5 Ton

Rear Tandem axle 13 Ton, Main reduction ratio 5.73, hub-reduction

Front/Rear suspension

Portrait positioned parabolic steel plate springs with
stabilization lever

4 U locked parabolic steel plate springs

Driven model 8x4

Brake system Compressed air drum brake

Driving axle 4

Tyre 11.00R20

Fuel tank 400 Litre

Battery 24V,180Amp/h

Cab specification

Flat top,manual control glass,rearview mirror,

without central control station

Air conditioner cool/heat 4.6kw/6.5kw , manual control.

Cab upholstery fibre glass, ABS, textile

Seat 1+1

Sleep single

Body colour Yellow/ Red, blue,green,silver,black optional

Cab

CGC3041

Product Description

Picture

DAYUN light dump truck/tipper loading between 3 tons
to 16 tons. Dayun is one truck chassis manufacturer.
China well-known trademark

Length x width x height 5965× 2200× 2450 mm

Wheelbase 3400mm

Front / Rear wheel track 1770/1640 mm

Front /Rear suspension 1185/1380 mm

Container dimension 3760× 2100× 800 mm

Total weight/Gross combination weight 4270kg

Curb weight / Gross vehicle weight 2580 kg

Cargo load weight 1490 kg

Seat 3

Max. speed ≤ 80

Max. gradient ≤ 40%

Mini. turning radius 12m

Approaching/leaving angle 30° /20°

Engine specification

Model YN33CR in-line, 4 cylinder 3298ml

Rate power( standard) 80kw (110hp)

Emission standard Euro II

Displacement 3.298 Litre

Driven model 4x2

Brake system Air brake

tyre 7.50-16

Fuel tank 90 Litre

Battery 24V, 180Amp/h

Cab specification

Seat 1+2

Bed 1

Body Color Red, blue,yellow,green,silver,black optional

LIGHT DUMP TRUCKS