Dayton Audio T652-AIR User Manual

DUAL 6-1/2" 2-WAY
TOWER SPEAKER
PAIR WITH AMT
TWEETER

Model: T652-AIR User Manual

Congratulations on your purchase of the Dayton Audio® T652-AIR speakers.
These affordable tower speakers feature dual 6-1/2” woofers and groundbreak­ing Air Motion Transformer (AMT) tweeter technology in a custom-tuned bass
reflex enclosure for huge dynamic impact and bass performance, along with
clear, natural high frequency sound from a compact, floorstanding design.
Please read on to discover how to get the most from your new speakers.

1) Parts Inventory

The T652-AIR speaker package includes the following items:

• 1 pair of Dayton Audio T652-AIR speakers

• 1 pair of 2-conductor red/black speaker cables

2) Installation Tools

No tools are required for installation of the T652-AIR speakers. The T652-AIR
speakers should be placed on the floor.

3) Speaker Placement

Because of their well-behaved off-axis response and excellent dispersion,
your new Dayton Audio speakers are less critical to position than most loud­speakers. Often, simply placing them where they best fit into the decorating
scheme is all that is necessary for exceptional performance.

CAUTION: Wall-mounting of the T652-AIR speakers is not recommended.
Use extreme caution whenever suspending a hanging load overhead,

or serious injury may result.

If you are inclined to go through a more rigorous positioning exercise, the
following paragraphs will help you achieve all the performance that your
system is capable of.

Carefully select a few recordings. Choose recordings made with simple ar­rangements and strong vocals by a single performer. Physically small sound
sources localize much more precisely. Placement of horns, strings, vocals, and
drums will snap into focus when the loudspeakers are optimally positioned.

Start with the speakers directly in front of your primary listening position. Avoid
hard vertical edges within 3 or 4 feet of either side of the cabinet. Position
the cabinets about 1-2 feet out from the wall. Listen to one of the selected
recordings paying close attention to the positions of the instruments and
vocalist. Move the speakers 6-12 inches at a time, returning to the listening
position to evaluate the results. Once placement is optimized, the vocalist will
be firmly positioned in front of the instruments and the instruments will seem
to be between or behind the loudspeakers. If possible, position your speakers
so that when you are seated in the primary listening position your ears are
10-12 feet from the tweeter. Viewed from your seat, the angle between the
speakers should be 30 to 60 degrees.

Pay special attention to the bass. The relation between bass response and
room position is critical. Adjust the position of the speakers closer to or fur­ther away from nearby walls so that the bass levels are in proportion with
the rest of the musical spectrum. The T652-AIR speakers may be placed
directly against walls, but if there is too much bass, move the speaker away
from the rear wall.

Loudspeaker positioning can be time-consuming, but the rewards justify the effort.

4) Speaker Connection

Use the supplied speaker wire or other good quality wire for the connection
between your Dayton Audio loudspeakers and the amplifier. For longer runs,
heavier wire should be used. For proper performance the speakers must be
“phased” correctly. To insure proper phasing, connect the red speaker ter­minals to the red amplifier terminals and the black speaker terminals to the
black amplifier terminals. All two-conductor wire is marked in some way to
help you do this. One side will be marked with a colored stripe, a raised rib, or
a different colored conductor. Use the marked side for the “red” connections,
if a color code is not provided.

5) Caring For Your Speakers

Clean your speakers by wiping with a damp, lint-free cloth. The finish of your
speakers can be maintained and enhanced by periodic use of a surface protec­tion such as “ArmorAll”. The grilles may be vacuumed (with brush attachment)
or gently tapped or brushed to remove dust and debris. It is recommended
to leave the removable grills in place during use.

POWER RATING NOTE:
almost any amplifier. Conversely, almost any speaker can be damaged by
almost any amplifier-despite either unit’s power rating. The published power
rating is accurate only if the volume level is never set above the point of au­dible distortion. Distortion is an indication that the amplifier or loudspeaker
is operating beyond its design limits, and damage may occur – often within
seconds. If you hear distortion, immediately reduce the volume. The T652-AIR
is designed to be used with stereo equipment rated from 5 to 150 watts and
from 4 to 8 ohms impedance.

Dayton Audio T652-AIR loudspeakers are designed to reproduce music and
speech in a home environment at moderate volume levels. When used within
their limits Dayton Audio T652-AIR loudspeakers will provide many years of
trouble free performance.

Almost any speaker can be used successfully with

SPECIFICATIONS:

Model Number: T652-AIR
Description: 2-Way Tower Speaker Pair (Floorstanding)
Woofer: Dual 6-1/2" polypropylene cone with 4-layer coil
Tweeter: Mini AMT type with pleated Kapton diaphragm
Enclosure Type: Bass refl ex
Finish: Black ebony pica vinyl on particle board
Power Handling: 90W RMS/150W max
Impedance: 6 ohms
Response: 45 Hz to 20,000 Hz
Sensitivity: 88 dB 1W/1m
Crossover: First order high-pass, 4,500 Hz
Terminals: Quick-connect spring-loaded terminals
Dimensions: 30" H x 7.1" W x 9.5" D

Depth includes grill*
* Grill is removable, acoustically-transparent cloth

WARNING: This product may contain a chemical or chemical[s] known to the State of California
to cause cancer or birth defects or other reproductive harm.

WARRANTY COVERAGE

Dayton Audio products are warranted to be free of all defects in material and workmanship for 5 YEARS from the date of purchase from
an authorized Dayton Audio dealer. This warranty and all rights provided are limited to the original owner and are non-transferable.
Dayton Audio's responsibility is limited to replacement or repair as set forth in this warranty statement.

Should a product require warranty service during this period, Dayton Audio will repair or replace without charge, any part or product
proving defective in material or workmanship. All warranty repairs and service must be performed by an authorized Dayton Audio
technician or service facility. The use of non-authorized repair services renders this warranty null and void, and any charges relating
to non-authorized repair are the responsibility of the product owner.

All expenses related to replacing or repairing a defective part or product under this warranty shall be assumed by Dayton Audio.
Dayton Audio reserves the right to replace defective product with a new or factory reconditioned unit.

WARRANTY EXCLUSIONS

1. This warranty does not cover product failure or damage resulting from misuse, abuse, neglect, accidents, alterations, standard
environmental deterioration, natural disasters, or improper use and/or installation.

2. This warranty does not cover cosmetic damage due to misuse or neglect. This includes paint damage, scratches, cracks or other
superficial marks related to improper use.

3. Failures arising from attempted servicing of a non-authorized Dayton Audio repair facility or technician are excluded from this warranty.

LIMITATION OF DAMAGES

In no event shall Dayton Audio be liable for consequential damages for breach of this warranty including installation charges, excessive
shipping expenses, property loss or other incidental loss. Some States do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to the buyer.

HOW TO OBTAIN WARRANTY SERVICE

To obtain services under this warranty, the buyer shall contact Dayton Audio's authorized service provider, Parts Express, at
1-800-338-0531 x 780 to obtain a return authorization number (RA#).

The buyer must carefully pack the warranted product along with a copy of the original purchase receipt, the return authorization number
(RA#), and a description to the repair facility listed below. Shipping for warranty service is dependent upon the return policy where the
Dayton Audio product was purchased.

Parts Express
Attn: Dayton Audio Warranty Repairs RA# (please write your RA# here)
705 Pleasant Valley Drive
Springboro, Ohio 45066

NOTICE TO BUYER

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

daytonaudio.com

tel + 937.743.8248
[e-mail]

Dayton Audio® Last Revised: 9/12/2017

705 Pleasant Valley Dr.
Springboro, OH 45066
USA