DaytonAudio HTS-1200B User Manual
Model: HTS-1200B User Manual
HOME THEATER
SPEAKER SYSTEM
Thank you for purchasing the HTS-1200B Home Theater Speaker System.
This system provides stunning clarity and imaging, and delivers superior
sound for even the most exacting audio or home theater applications. It
consists of four shielded speakers for the front and rear, and one shielded
center channel. Just add a subwoofer and your home theater system is
complete. The satellites are made of a high impact ABS cabinet featuring
mounting brackets and threaded inserts for use on walls or stands.
Speaker Placement
The positioning of the speaker differs according to the size and acoustics of
the listening room. While listening to different sources, try various speaker
positions to determine which layout provides the best surround sound effect.
Front Speakers: Place the front speakers in front of the listening position,
to the left and right of the TV. The speakers should be level or slightly
higher than the height of the listeners’ ears.
Center Speaker: Place the center speaker between the front speakers;
above or below the TV. This speaker reproduces most of the dialogue and
improves imaging and depth of fi eld in the movie soundtrack.
Rear Speakers: Place these speakers to the left, right, and slightly behind
the listening position. They should be positioned above the height of the
listeners’ ears. Be careful not to place the speakers too far behind the
listening position, as this will reduce their effectiveness. These speakers
will reproduce most of the special effects and create a “surround sound”
feel to the movie.
System Hook-Up
After you’ve chosen the approximate speaker locations, run wire to each
location starting with the rear speakers because they will be your longest
runs. Cut and strip the ends of each wire run to expose the conductors and
connect the speakers, making sure proper polarity is observed. Since this is
for surround-sound use, it is important that each speaker is connected to the
correct channel on the amplifi er. The left, right, and surround labels on the
receiver assume that the installer is sitting in the main listening position facing
the television.
Satellite Specifi cations: • 3-3/4" polypropylene woofer with rubber surround
• 5/8" polycarbonate tweeter with ferrofl uid • Frequency response: 100 –
20,000 Hz • Impedance: 8 ohms • Power handling: 50 watts RMS/80 watts max
• Sensitivity: 87 dB 1W/1m • Dimensions: 7-1/2" H x 4-1/2" W x 5-1/4" D.
Center Channel Specifi cations:
• Dual 3-3/4" polypropylene woofers with
rubber surrounds • 5/8" polycarbonate tweeter with ferrofl uid • 5/8" piezoelectric
supertweeter • Frequency response: 100 – 20,000 Hz • Impedance: 8 ohms
• Power handling: 80 watts RMS/120 watts max • Sensitivity: 87 dB 1W/1m
• Dimensions: 4-1/2" H x 12-1/2" W x 6" D.
Dayton Audio® Last Revised: 4/12/2017
daytonaudio.com
tel + 937.743.8248
info@daytonaudio.com
705 Pleasant Valley Dr.
Springboro, OH 45066
USA
5-Year Warranty
See daytonaudio.com for details
Loading...