DaytonAudio DTA-1 User Manual

Model: DTA-1 User Manual

CLASS T DIGITAL
AUDIO AMPLIFIER

Introduction:

Thank you for your purchase of the Dayton Audio DTA-1 Class T Digital Audio
Amplifier.

Don’t let the compact size fool you; the DTA-1 amplifier has the heart of a serious
performer. Inside the DTA-1 is a proprietary Class T amplifier circuit, designed
to create more efficient and higher quality audio amplification using digital signal
processing, reducing power wasted as heat, meaning more music power to your
speakers. The resulting soundstage, tonal balance and sound quality—combined
with a modest price—makes this pint-sized T-Amp one of the “soundest” audio
amplifier investments you can make!

The DTA-1 is remarkably affordable, yet still delivers a crisp, vibrant signal that
compares to most high-quality linear amplifiers. Perfect for home or at play
applications as the unit operates on eight AA batteries for portable use or the
included AC adapter can be used to power the DTA-1 for indoor use.

Package Contents:

(1) Class T Digital Audio Amplifier
(1) 12VDC, 2000mA Switching Power Supply with Interchangeable

US/EU Power Plugs

(1) 3.5 mm Coiled Audio Cable (6")

Features:

• Turn-on & turn-off “pop” suppression

• Intelligent short-circuit protection

• Intelligent over-temperature protection

• Connects to any passive 4/8ȍ speakers

• Accepts standard audio line output from any sound system

OPERATION
Function:

1. Power/Volume Control

2. Power Indicator

3. Speaker Terminals

4. Power Input

5. 3.5 mm Audio Input

6. Battery Compartment (bottom of unit)

Operation:

I. Attach an audio device such as MP3 player, PC or CD player to the

3.5 mm audio input.

II. Attach two 4 or 8 ohm speakers to the speaker terminals. Pay attention to

speaker polarity; red to red (+) and black to black (-).
III. Install 8 “AA” batteries or connect the 12 VDC power supply.
IV. Turn on the amplifier and set to appropriate volume level.
V. Enjoy your Class T Digital Audio Amplifier.