Daytona DJ3000, DS300LRB Owner's Manual & Safety Instructions

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 18a

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

Copyright© 2016 by Harbor Freight Tools®. All rights reserved.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

To ol s re q u ir e d f o r a s s e mb l y a n d s e r vi c e m a y n o t b e in c l ud e d .

Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Page 2 For technical questions, please call 1-888-866-5797. Item 63183

IMPORTANT SAFETY INFORMATION

1. Study, understand, and follow all instructions
before operating this device.

2. Do not exceed rated capacity.

3. Use only on hard, level surfaces.

4. Lifting device only. Immediately after lifting,
support the vehicle with appropriate means.

5. Do not move or dolly the vehicle while on the jack.

6. Failure to heed these markings may result in
personal injury and/or property damage.

7. Lift only areas of the vehicle as specified
by the vehicle manufacturer.

8. No alterations shall be made to this product.

9. Never work on, under or around a load
supported only by this device.

10. Do not adjust safety valve.

11. Wear ANSI-approved safety goggles and
heavy-duty work gloves during use.

12. Keep clear of load while lifting and lowering.

13. Lower load slowly.

14. Apply parking brake and chock tires
before lifting vehicle.

15. Lift vehicle only at manufacturer
recommended locations.

16. Inspect before every use; do not use if parts are
loose or damaged, or if leaking hydraulic fluid.

17. Do not use for aircraft purposes.

18. Do not use any objects (such as blocks of wood) in
between Saddle Pad or Saddle and lifting point.
Objects placed on the Saddle will reduce
the stability of the Jack, and could allow the
vehicle to slip off the Saddle and fall.

19. The warnings, precautions, and instructions
discussed in this manual cannot cover all
possible conditions and situations that may occur.
The operator must understand that common sense
and caution are factors, which cannot be built into
this product, but must be supplied by the operator.

20. The Handle socket may be held down by a clip under
tension. Wear ANSI-approved safety goggles before
freeing Handle socket. Remove clip carefully.

21. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.

SAVE THESE

INSTRUCTIONS.

IMPORTANT! Before first use:

Check hydraulic oil level and fill to 1/4″ below the Fill Plug hole as needed as stated on page 6. Thoroughly test

the Jack for proper operation. If it does not work properly, bleed air from its hydraulic system as stated on page 6.

Page 3For technical questions, please call 1-888-866-5797.Item 63183

Specifications

Weight Capacity 3 Tons

Weight Capacity (lb.) 6,000

Maximum Height (in.) 23.125

Minimum Height (in.) 3.75

Handle Length (in.) 50.25

Front Wheel Diameter (in.) 3.5

Front Wheel Width (in.) 2.0

Rear Caster Diameter (in.) 2.5

Rear Caster Width (in.) 1.375

Saddle Pad Size (in.) 5 x 5 sq.

Hydraulic Oil non-detergent 22 weight

Weight (lb.) 104

Meets 2014 ANSI/ASME PASE standards.

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

Page 4 For technical questions, please call 1-888-866-5797. Item 63183

Features and Benefits

The Daytona [DJ3000] 3 Ton Professional
Super Duty Jack was engineered for

automotive professionals. The Model [DJ3000]
features Advanced Rapid Pump® technology
for fast lift times and exceptionally long life.

Long-Life Advanced
Rapid Pump® Hydraulics

The hydraulic power unit is designed to provide
over 5000 lift cycles with minimal wear.

An Integrated Magnetic Filtration (IMF)
System prevents contaminants
from damaging pump pistons and
other high pressure components.
Precision-engineered high performance seals
along with a sealed non-vented reservoir
ensure longer fluid life with no leaks.

Rapid Pump technology delivers twice the lift
force with each stroke to lift heavy loads in half
the time of conventional hydraulic systems.
The pistons are continuously force-loaded to
keep the pump handle in ready position during
use. Load limiters with a bypass valve protect
the pump if an overweight load is attempted.

Low-Profile/High Lift Saddle

The Low Profile design gives you a

minimum height of just 3.75″ for working with

low-clearance vehicles. The extended lift
arm provides High Lift for a maximum height

of 23.125″ for plenty of working space when
properly supported. The big 5″ x 5″ saddle

supports lift points solidly without danger
of slipping. The saddle can be removed to
install lifting accessories (sold separately.)

Super Duty Strength and Durability

The Daytona Super Duty Professional Jack
chassis is constructed from all-welded
steel plate with I-beam reinforcement
for extraordinary strength and reliability.
Contoured steel wheels and casters roll
smoothly with less surface area contact for
exceptional mobility. Fully lubricated with dual
bearings and easy access grease fittings.

Effortless Operation

Get easy leverage and positioning with the
extra long foam-protected lift handle. All moving
components are factory lubed for smooth action
with easily serviceable grease fittings in the
lift mechanism. A locking spring mechanism
keeps the handle in place during use.

The Rapid Pump® system gives you
easy-twist universal joint hydraulic release
for precise, controlled lowering.

Feature Summary:

• Integrated Magnetic Filtration (IMF)

System extends pump life by

eliminating contaminants

• Rapid Pump® technology to reach

working height with the fewest strokes

• Low Profile with a lowered height of

3.75″ for low clearance vehicles

• High Lift for a maximum height of 23.125″

• Super Duty all-welded steel

I-beam construction

• Contoured lift arm for ample

rocker panel side clearance

• Pumps and ram pistons with

long-life precision milled premium seals

• Big 5″ x 5″ saddle with rubber cushioned

pad and option for accessories

• Easy access grease fittings in lift arm

pivot, handle socket and front wheels

• All-steel contoured wheels for easy mobility

• Knurled long-reach lift handle locks in

place, foam guard to protect vehicle finish

• Powder coated finish for durability