UPC 193175462862
23e
59239
EXTRA-LONG HIGH-LEVERAGE ONE-PIECE FLOOR JACK HANDLE
Instructions
Compatible only with Daytona and most Pittsburgh Steel Jacks.
Attach to Jack with
Handle Release
1. To install Handle, pull on Handle
Release and insert the grooved end of
the Handle into the Handle Socket.
2. Let go of the Handle Release.
Gently pull up on the Handle to
make sure that it is secure.
3. Check that Jack operates correctly.
Attach to Jack with
Handle Release Bolt
1. To install Handle, loosen Handle
Release Bolt and insert the grooved end
of the Handle into the Handle Socket.
2. Tighten Handle Release Bolt.
Gently pull up on the Handle to
make sure that it is secure.
3. Check that Jack operates correctly.
Handle
Release Bolt
Handle
Socket
Handle Release
Handle
Socket
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
For technical questions, please call 1-888-866-5797.
Loading...