Dayton SB User Manual

TECHNICAL DATA SHEET

SB - SLAB BOLSTER

Bar Supports

DESCRIPTION

Dayton Superior Slab Bolster is a continuous reinforcing
bar support.

APPLICATION

Slab Bolster is used to support the lower slab reinforcing
bar on a continuous 5ft long top wire.

FEATURES

■ Available in cover heights from ¾” to 3” in 1/4“

increments

■ Top wire corrugations are spaced on 1” centers and

serve as guides for reinforcing bar spacing

■ Available in plain, epoxy or galvanize coatings and

stainless steel

■ 5' lengths standard, other lengths available as special

order

BENEFITS

■ Continuous design reduces labor time placing rebar

TECHNICAL DATA

INSTALLATION

1. Per CRSI RB4.1-2014 bar supports spacing guidelines

RELATED PRODUCTS

■ SBU Slab Bolster Upper

■ BB Beam Bolster

■ BBU Beam Bolster Upper

HOW TO ORDER

■ Specify: (1)Linear feet required, (2) Slab Bolster (3)

Finish (plain, epoxy, galv, stainless steel) (4) feet: plain,
dipped or tipped

ORDERING INFORMATION

PLAIN (CLASS 3)

Product Code Description Weight

70100 3/4" X 5' 0.1787 LB

70200 1" X 5' 0.18 LB

70300 1-1/4" X 5' 0.1908 LB

70400 1-1/2" X 5' 0.1938 LB

70410 1-3/4" X 5' 0.1971 LB

70420 2" X 5' 0.216 LB

70430 2-1/4" X 5' 0.236 LB

70440 2-1/2" X 5' 0.245 LB

70450 2-3/4" X 5' 0.26 LB

70460 3" X 5' 0.2588 LB

PLASTIC TIPPED (CLASS 1)

Product Code Description Weight

70106 3/4" X 5' 0.1818 LB

70206 1" X 5' 0.1844 LB

70306 1-1/4" X 5' 0.1922 LB

70406 1-1/2" X 5' 0.1928 LB

70416 1-3/4" X 5' 0.2001 LB

70426 2" X 5' 0.21 LB

70436 2-1/4" X 5' 0.213 LB

70446 2-1/2" X 5' 0.235 LB

70456 2-3/4" X 5' 0.2444 LB

70466 3" X 5' 0.2455 LB

APPROVALS / COMPLIANCE

■ CRSI RB4.1-2014

■ ACI-50-66

■ ACI315 and AC-315R

GALVANIZED & TIPPED (CLASS 1)

Product Code Description Weight

70209 1" X 5' 0.18 LB

70309 1-1/4" X 5' 0.18 LB

70409 1-1/2" X 5' 0.18 LB

70419 1-3/4" X 5' 0.21 LB

70429 2" X 5' 0.21 LB

70439 2-1/4" X 5' 0.21 LB

70449 2-1/2" X 5' 0.24 LB

70459 2-3/4" X 5' 0.24 LB

70469 3" X 5' 0.25 LB

Page 1 of 2 File Date: 7/11/2017

TECHNICAL DATA SHEET

SB - SLAB BOLSTER

Bar Supports

PLASTIC DIPPED (CLASS 1)

Product Code Description Weight

70103 3/4" X 5' 0.19 LB

70203 1" X 5' 0.19 LB

70303 1-1/4" X 5' 0.2 LB

70403 1-1/2" X 5' 0.202 LB

70413 1-3/4" X 5' 0.21 LB

70423 2" X 5' 0.23 LB

70433 2-1/4" X 5' 0.25 LB

70443 2-1/2" X 5' 0.26 LB

70453 2-3/4" X 5' 0.27 LB

70463 3" X 5' 0.28 LB

EPOXY COATED (CLASS 1A)

Product Code Description Weight

70107 3/4" X 5' 0.1768 LB

70207 1" X 5' 0.183 LB

70307 1-1/4" X 5' 0.1984 LB

70407 1-1/2" X 5' 0.2127 LB

70417 1-3/4" X 5' 0.2206 LB

70427 2" X 5' 0.2242 LB

70437 2-1/4" X 5' 0.235 LB

70447 2-1/2" X 5' 0.2464 LB

70457 2-3/4" X 5' 0.26 LB

70467 3" X 5' 0.2684 LB

EPOXY COATED & PLASTIC DIPPED (CLASS 1A)

Product Code Description Weight

701073 3/4" X 5' 0.19 LB

702073 1" X 5' 0.19 LB

704073 1-1/2" X 5' 0.21 LB

704273 2" X 5' 0.23 LB

704473 2-1/2" X 5' 0.26 LB

704673 3" X 5' 0.28 LB

WARRANTY (ACCESSORIES)

Limited Warranty. Dayton warrants, for a period of 60 days from the
date of shipment (three years from the date of shipment in the case of
formwork, excluding any consumable Products included with such
formwork), that Products and any associated application drawings and
engineering services provided by Dayton (“Ancillary Services”) will be
free from defects in material and workmanship and, in the case of
custom designed formwork, that the formwork will meet the
specifications set forth in the design drawings approved by Dayton and
Customer. Any claim under this warranty must be made in writing
within such warranty period. If any Product and/or Ancillary Service
covered by a timely claim are found to be defective, Dayton will, within
a reasonable time, make any necessary repairs or corrections or, at
Dayton’s option, replace the Product. Unless pre-authorized by Dayton
in writing, Dayton will not accept any charges for correcting defects or
accept the return of any Product. This warranty will not apply to any
Products that have been subjected to misuse, neglect, storage
damage, misapplication, accident or any other damage caused by any
person other than Dayton, or that have not been maintained in
accordance with Dayton’s specifications. THIS LIMITED WARRANTY
IS IN LIEU OF ALL OTHER WARRANTIES AS TO THE PRODUCTS
AND ANCILLARY SERVICES. DAYTON MAKES NO OTHER
WARRANTIES OR GUARANTEES, EXPRESS OR IMPLIED,
INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE OR OTHERWISE. THE REMEDIES
SET FORTH IN THIS SECTION ARE CUSTOMER’S EXCLUSIVE
REMEDY FOR BREACH OF WARRANTY.

MANUFACTURER

Dayton Superior Corporation
1125 Byers Road
Miamisburg, OH 45342
Customer Service: 888-977-9600
Technical Services: 877-266-7732
Website: www.daytonsuperior.com

Page 2 of 2 File Date: 7/11/2017