Dayton DP211515C, D11515, D11516, D611515 User Manual
Cutout in
No. of
Countertop
1
1
/4" or 11/2" Dia.
1
1
/2" Radius
Faucet Minimum
Model
Overall Inside Bowl Corners
Holes Cabinet
Number L W L W D L W 4" Center Size
DP211515C 15 15 12 10 51/8 143/8 143/8 218
D11515 15 15 12 10 51/8 143/8 143/8 1, 2 or 3 18
D11516 15 15 12 10 51/8 143/8 143/8 1, 2 or 3 18
D611515 15 15 12 10 51/8 143/8 143/8 1 or 2 18
These sinks comply with ANSI Standard A112.19.3.
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
These sinks are listed with the Canadian Standards
Association.
This faucet is classified by Underwriters Laboratories
Inc. to
NSF/ANSI61 for residential use.
Bowl Depth is 5-1/8"
Model D115152 Illustrated
4"
10"
15"
12"
2-1/4"
15"
GENERAL
Sink bowl seamlessly formed of #23 gauge, nickel bearing
stainless steel. Self-rimming.
DESIGN FEATURES
Bowl Depth: 5-1/8".
Coved Corners: 2-1/4" vertical and horizontal radius.
Bowl and Faucet Deck Recess: 3/16" total recess below outside
edge of sink.
Finish: Exposed surfaces are polished to a satin finish with
highshine bowl radius.
Underside: Undercoated as described below.
Self-rimming: Sink is furnished with appropriate number of
clips and screws to provide a secure installation.
SINK PACKAGE
DP211515C Package includes:
(1)
D11515 sink.
(1)
LKA2475 gooseneck faucet. Overall height, 7-9/16".
(1)
D5018A drain with basket strainer.
OTHER
Drain Opening: 2" (D11515, D611515 and DP211515C), 3-1/2"
(D11516).
NOTE: Unless otherwise specified, sink is furnished with 2
faucet holes as shown.
Model D115152
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
SINK DIMENSIONS (INCHES)*
*
Length is left to right. Width is front to back.
D-Prefix sinks are packed one per shipping carton. Sink bowl is fully undercoated to dampen sound and
prevent condensation.
D6-Prefix sinks are nested 6 units per shipping carton. Sink bowls are sound deadened on bottom only.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2006 Elkay
(Rev. 5/06)
2-3G
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Dayton®Hospitality Sinks
and Sink Package
Models D11515, D11516 and DP211515C
SPECIFICATIONS
Model DP211515C
HOLE DRILLING CONFIGURATIONS
4"
4" 4"
1
(1-1/4" diameter)
2
(1-1/4" diameter)
3
(1-1/2" diameter)
Loading...