Dayton D11719, D11721, D12521, D12522, DJ12522 User Manual
...
SP ECIFICATIONS
GENERAL
Sink is formed of #22 gauge, 300 series, nickel-bearing stainless steel. Top mount.
DESIGN FEATURES
Bowl Depth: See back
Coved Corners:
D11719: 2-1/2” (64mm) vertical and 2-3/4” (70mm) horizontal radius
D11721, D12521, D(J)12522, DD(J)12522: 4” (102mm) vertical and
3-1/4” (83mm) horizontal radius.
Rim Height: 5/32” (4mm)
Faucet Deck: Raised (except D11719 and D11721).
Finish: Exposed surfaces are polished to a satin finish.
Underside: Undercoated on bottom of bowl to reduce
condensation and dampen sound.
OTHER
Drain Opening: 3-1/2" (89mm)
Note: Unless otherwise specified, sink is furnished with 3 or 4
faucet holes as shown.
Installation Hardware: Included for 3/4” (19mm) countertop.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
Dayton®Single Bowl Sink
Models D, DJ, DD and DDJ Series
Model D125224
Model D117193
1-1/2” (38mm) Diameter Faucet Holes 4"(102mm) Center
Hole Drilling Configurations
1
4"
2
4" 4"
3
4" 4" 4"
4
SEE NEXT PAGE FOR PRODUCT DIMENSIONS.
U-Channel Type Mounting System
SINKS ARE
MADE IN THE USA
J-Channel Type Mounting System
In keeping with our policy of c ontinuing product improvement, Elkay reserves t he right to change
produc t specifications without notice.
Elkay
elkayusa.com
2222 Camden Court
Oak Brook, IL 60523
This sp ecification describes an Elkay p roduct with design, quality and f unctional benefits to the
user. When making a comp arison of other producers’ offerings, b e cert ain these feat ures are not
overlooked.
Printed in U.S.A.
©2010 Elkay
(Rev. 7/10) 2-15H
Model D12544 Illustrated
4"
4" 4"
Model D117193 Illustrated
4" 4"
Dayton®Single Bowl Sink
Models D, DJ, DD and DDJ Series
SINK DIMENSIONS (INCHES)*
Overall Inside Bowl
U-Channel J-Channel
Model Model
Number Number A B C D E L W
D11719
D11721
D12521 – 1, 2, 3 or 4
D12522 DJ12522
DD12522 DDJ12522 3 or 4
*
Lengt h is lef t to right . Width is front t o back.
†1 hole only available for model D12522
– 1, 2 or 3
–
L W L W D
19
17
(432mm)
17
(432mm)
25
(635mm)
25
(635mm)
25
(635mm)
(483mm)
21-1/4
(540mm)
21-1/4
(540mm)
22
(559mm)
22
(559mm)
14
(356mm)
14
(356mm)
21
(533mm)
21
(533mm)
21
(533mm)
(356mm)
15-3/4
(400mm)
15-3/4
(400mm)
15-3/4
(400mm)
15-3/4
(400mm)
14
6-1/8
(156mm)
6-1/2
(165mm)
6-1/2
(165mm)
6-9/16
(167mm)
7-1/16
(181mm)
Cutout in
Countertop
(1-1/2"(38mm)
Radius Corners)
16-3/8
(416mm)
(467mm)
16-3/8
(416mm)
(524mm)
24-3/8
(619mm)
(524mm)
24-3/8
(619mm)
(543mm)
24-3/8
(619mm)
(543mm)
18-3/8
20-5/8
20-5/8
21-3/8
21-3/8
No. of 1-1/2”
(38mm) Dia.
Faucet Holes
4"(102mm)
†, 2, 3 or 4
1
Center
1, 2 or 3
SP ECIFICATIONS
Minimum
Cabinet
Size
21
(533mm)
21
(533mm)
30
(762mm)
30
(762mm)
30
(762mm)
Elkay
(Rev. 7/10)
2-15H
C
A
Bowl Depth is E
B
B
D
C
A
Bowl Depth is E
2222 Camden Court
Oak Brook, IL 60523
elkayusa.com
D
Printed in U.S.A.
©2010 Elkay
Loading...