Daystar KJ05001BK User Manual

Stabilizer Bar and Track Bar Lubrication
Instruction Sheet P10026
-02
WARNING
This vehicle has been modified to enhance its performance. The steering, braking and handling of this vehicle
ucks, This vehicle handles differently from an ordinary vehicle in
trol, possibly leading to a roll
over or other accident that could result in serious injury or death to driver and passengers. If larger tires are
Before Installing your new Stabilizer Bar or Track Bar Components, read the instructions carefully. Your polyurethane component kit has been designed to provide the highest quality and performance. Improper installation could result in failure. Please use caution and have your installation inspected by a certified mechanic
Tech Support Contact Info
Tech@DaystarWeb.com
Phone. 623.907.0081
Fax. 623.907.0088
841 South 71st Avenue
Phoenix, AZ 85043
There are many types of stabilizer bars, your vehicle could have any combination of components. Lubricate your new suspension components as shown above. Lubricate track bars as you would double drop links. Use a Teflon based grease on your polyurethane components, it will give you increased performance and
longevity.
IMPORTANT: Take time to clean rust and scale off the stabilizer bar, drop link, and track bar eyes.
Before installing your new components, compare the new parts with the old parts. Make sure you are installing the correct parts.
Note: Polyurethane bushings for drop links and track bars could be one piece or two piece depending on the application.
will differ from standard passenger cars and tr driving conditions which may occur on streets, highways and off road. Avoid unnecessary abrupt maneuvers, sudden stops, sharp turns and other driving conditions that could cause loss of con
installed the speedometer will read lower than the vehicles actual speed.
This kit should be installed by a professional mechanic.
DRIVE WITH CARE, REDUCE SPEED
AND WEAR SEAT BELTS AT ALL TIMES.
2000 Daystar Products International Inc.
Loading...