Daystar KJ02008 User Manual

Spring Main Eye and Shackle Bushing Instructions

Before installing your new urethane bushings, read the instructions

carefully. Your urethane component kit has been designed to provide the

Improper Installation could result in

failure. Please use caution and have your installation inspected by a

www.DaystarWeb.com

1. Remove the existing rubber

and the metal outer shell. Most

nd some

shackles have a rubber

bushing that is molded in an

outer shell. This must be

removed. You may have to

use force to get these out. We

recommend, if possible, that

you have an experienced

mechanic perform this

er to

insure proper fit. If something

doesn’t easily fit together, find

out why. (old bolts may be

4. Apply a light coat of grease

to the contact surface. The

contact surfaces include the

and

the O.D. flange of the

urethane, frame brackets, and

Instruction Sheet P10001

-

02

2. Clean the I.D. of the spring

eye and the frame shackle

brackets to remove any rubber

Use a wire brush or

Rubber

Spring

WARNING

This vehicle has been modified to enhance its performance. The steering,

er cars

and trucks, This vehicle handles differently from an ordinary vehicle in driving

Avoid unnecessary abrupt maneuvers, sudden stops, sharp turns and

se loss of control, possibly leading to a

roll over or other accident that could result in serious injury or death to driver

If larger tires are installed the speedometer will read lower than the

highest quality and performance.
certified mechanic.

spring eyes a

Tech Support Contact Info

[e-mail]

Phone. [phone]

Fax. [phone]

841 South 71st Avenue

Phoenix, AZ 85043

Bushing

Metal Outer Shell

operation.

or rust.
sand paper.

3. Put all the parts togeth

bent)

I.D. of the spring eye, I.D.

the O.D. of the metal sleeve.

Eye

braking and handling of this vehicle will differ from standard passeng
conditions which may occur on streets, highways and off road.
other driving conditions that could cau
and passengers.
vehicles actual speed.

DRIVE WITH CARE, REDUCE SPEED

AND WEAR SEAT BELTS AT ALL TIMES.

This kit should be installed by a professional mechanic.

 2000 Daystar Products International Inc.