Daymak Boomerbuggy III, Boomerbuggy IV Owner's Manual

Page 1
III & IV Series
Mobility Scooter
Owner’s Manual
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · M3N 1V9
416.749.2324 · 1.866.379.7779 ·
Page 2
Introduction
Thank you for purchasing Daymak’s Boomerbuggy Mobility Scooter. We thank you for choosing a Daymak scooter, especially one that has been designed to provide you with years of trouble free, comfortable, quiet, and eco-friendly service. Your scooter has been equipped with the latest technologies that assist in providing you with the most efficient and comfortable ride you’ve ever felt. We at Daymak Inc. recognize the importance of your comfort when it comes to mobility, and our Boomerbuggy Mobility Scooters provide just that; with our direct drive transaxles and electromagnetic brakes, you will glide effortlessly where ever you choose to go. Another amazing feature of our Boomerbuggy mobility scooters is the fact that they are easily transportable and can be easily disassembled for storage.
Please be sure to take time reading this manual thoroughly before
operating your new scooter. As the operator, you are solely responsible for the manner in which you operate and maintain your scooter. Daymak Inc. is not responsible for any damage or personal injury incurred through improper or unsafe usage of the Boomerbuggy Mobility scooter.
For more information about our products, warranty, or services, or if you
are having any trouble understanding the instructions presented in this manual, please contact your nearest Daymak dealer, or call Daymak headquarters at 1­866-379-7779, or visit our website at
www.daymak.com.
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Page 3
Mirrors
Control Panel
Carrier Basket
Tiller / Steering Colum
Headlights
Tires
Reflectors
Cup Holder
Anti-Tip Wheels
Rear Lights / Indicators
Adjustable Armrests
Foot Rest
Seat
Mirrors
Control Panel
Carrier Basket
Tiller / Steering Colum
Headlights / Indicators
Tires
Cup Holder
Anti-Tip Wheels
Rear Lights / Indicators
Adjustable Armrests
Foot Rest
Seat
Headrest
Diagrams and Specs
Boomerbuggy III Reference Guide
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Boomerbuggy IV Reference Guide
Page 4
Model Boomerbuggy III Overall Dimensions 51.38” x 25.20” x 46.06”
Gross Weight 96 kg / 211.64 lbs Net Weight (including
86 kg / 189.59 lbs
batteries) Front Wheel 10” Rear Wheel 10” Weight Capacity 150 kg / 330.69 lbs Forward Speed (adjustable) 6 - 8 km/h Reverse Speed (adjustable) 2.4 – 4.8 km/h Range Up to 45 km per charge Turning Radius 47.24” Battery 12V 38AH x 2 Brakes Intelligent regenerative and
electromagnetic
Anti-Tip Wheels 3” x 1” Bumper Front and Rear Motor 24V / 300W Charger AC100-240V50/60HZ
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Output: 24V – 4A
Page 5
Model Boomerbuggy IV
Overall Dimensions 55.51” 24.61” x 48.03” Gross Weight 105 kg / 231.48 lbs Net Weight (including
96 kg / 211.64 lbs
batteries) Front Wheel 10” Rear Wheel 10” Weight Capacity 150 kg / 330.69 lbs Forward Speed (adjustable) 6 - 9 km/h Reverse Speed (adjustable) 2.4 – 4.8 km/h Range Up to 36 km per charge Turning Radius 51.18” Battery 12V 38AH x 2 Brakes Intelligent regenerative and
electromagnetic
Anti-Tip Wheels 3” x 1” Bumper Front and Rear Motor 24V / 300W Charger AC100-240V50/60HZ
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Output: 24V – 4A
Page 6
EMI Safety Information
EMI Warning
The increasing rate at which communication technology develops has
flooded our environment with electromagnetic (EM) waves that are emitted by various sources (such as television transmitters, cellular phones, wireless technologies, and etc). Electromagnetic Interference (EMI) occurs more intensely as you approach the source of the transmission and are capable of causing your scooter to malfunction or function uncontrollably. EMI may cause possible interference with the motor and its braking system!
WARNING! Be wary of EM sources around you, as unintended EMI may cause accident or injury! Some cellular phones and similar devises transmit signals while they are on, even when not in use!
While not guaranteed, the following devices are not likely to cause emit
enough EMI to interfere with the scooter: cordless phones, laptops, AM/FM radios, TV sets, CD players, cassette players, and small appliances.
EMI Recommendations
Do not use hand-held personal communications (cellular phones, CB
radio, ham radio, walkie-talkies, etc) while the scooter is in operation
Be aware of any nearby transmitters along your route to reduce
unwanted interference
Turn off your scooter when not in operation to reduce chances of
unintended movement
If unintended movement occurs, turn off your scooter as soon as it is
safe
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Page 7
Mirrors
Fuse
Forward Lever
Horn
Speed Adjustment Knob
Forward/Reverse Indicator
Emergency Brakes
Reverse Lever
Brake Release
Getting to Know your Scooter
Scooter Control Panel
Charge Indicator
Charging Port
Turning Signals
Headlight Switch
Ignition
Ignition
Place your keys in the ignition and turn clockwise one click to engage the motor. You will know the scooter is on once the LEDs light up on your control panel. To turn off your scooter, simply turn your key counter-clockwise.
Operating Levers
The forward lever is on your right hand and the reverse lever is on your left hand. The speed of the scooter is dependent on the amount of pressure applied to these levers. Although there are two separate levers, either lever is capable of both forward and reverse.
Brakes
The scooter uses electromagnetic brakes assisted by the motor to provide a smooth, comfortable stop. To use the brakes, simply release the operating levers and the scooter will automatically engage the brakes.
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Page 8
Speed Controls
You can adjust the speed of your scooter by turning the speed adjustment knob. The lowest setting is set by turning the knob fully counter-clockwise and the highest setting is set by turning the knob fully clockwise.
Charge Indicator
The number of LED bars lit indicates the amount of charge left. The true charge level will show only when the bike is in operation.
CAUTION! Do not allow the battery to completely deplete! For optimal battery maintenance, charge your batteries once they are at approximately 20%!
Light Switch
The switch turns on or off the headlights and taillights, if applicable. I is the on position and O is the off position.
Horn
The horn button is located on the tiller, facing the operator. Pressing the horn button operates it.
Indicator Switch
The indicator switch will engage the indicators respective to the position the switch is set. Pressing up (labeled
down (labeled ►) will engage the right indicator.
) will engage the left indicator and pressing
Charging Port
Turn the cover and the charging port will be exposed. Align the charging plug’s pins with the charging port’s holes and insert the gently insert the charger.
IMPORTANT! When charging your scooter, always make sure that you plug the charger into the scooter before plugging the charger into the wall! Failure to do so can potentially damage the scooter.
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Page 9
Free Wheel Lever
Anti-Tip Wheels
Brake Release Button
While the scooter is on, pressing the brake release button will release the brakes, allowing you to physically push the scooter forward and reverse regardless of the free wheel lever’s position. Once the button is released, the brakes will automatically reengage.
Free Wheel Lever
Free Wheel Operation
The free wheel lever engages the parking brake while the scooter is inactive. Releasing the free wheel lever will allow you to physically move the scooter, but you will not be able to operate the scooter. For safety purposes, the lever should be left engaged.
To release the wheels, push the free wheel lever up
To engage the brakes (and for normal operation), push the free wheel
lever down
WARNING! Do not put the scooter into free wheel mode on any grade of incline! The brakes will not be engaged in free wheel mode and therefore the scooter can roll in an undesired manner and can result in injury or damage to the scooter.
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Page 10
Anti-Tip Wheels
The anti-tip wheels are a safety measure that helps to prevent the scooter from being tipped over. The anti-tip wheels are located at the rear of the scooter’s frame.
WARNING! The scooter should never be used unless the anti-tip wheels are in place. Failure to do so can result in injury or damage.
Safety Warnings
WARNING! Failure to follow these instructions may result in damage to the scooter or personal injury!
Safety Advice
Please keep the following in mind to prevent any unwanted injury or damage.
DO NOT carry passengers
DO NOT drive across a slope
DO NOT drink and drive (or under the influence of medications that may
impair your driving ability)
DO NOT tow a trailer
DO NOT use distracting devices such as cellular phones while operating
DO NOT exceed inclines over 8°
DO NOT turn on steep inclines
DO NOT turn suddenly at high speeds
DO NOT get on or off the scooter unless the brakes are on and the
scooter is off
DO NOT switch the scooter off while in motion
DO NOT drive the scooter where you cannot safely walk; such as roads,
streets, highways, and etc.
DO NOT attempt to drive over curbs greater than 2” in height
DO NOT exceed the suggested user weight limit
DO NOT use an escalator; please opt for the elevator
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Page 11
DO NOT drive on an incline with oil, water, or ice on it
DO NOT try to lift the scooter by the seat, tiller, rear chassis cover, or
any removable parts
DO NOT use parts of accessories that are not authorized by Daymak Inc.
DO NOT connect any medical devises to the scooter battery
On the Road
Please adhere to the following recommendations to ensure your safety.
DO NOT drive in the rain
DO NOT drive in or on snow
DO NOT drive off-road or on any uneven surfaces
DO NOT drive in traffic
DO NOT reverse unless you are certain there are no obstacles behind
you
DO NOT make sudden stops, weave erratically, or make sharp turns
DO NOT extend your arms or legs outside of the scooter while in
operation
DO NOT attempt to climb curbs greater than 2”
DO NOT attempt to cross a gap greater than 3”
DO NOT attempt to climb a hill greater than 10”
DO NOT attempt to drive across a sloping surface greater than 8”
DO NOT drive at full speed on a decline
DO NOT get on or off the scooter when on a hill
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Page 12
SAFETY WARNING! When getting on or off the scooter, please make sure that the key is in the off position to prevent engaging the scooter accidentally. When seated comfortably, set the speed control knob according to your driving ability. We recommend that you keep the speed at the lowest setting (fully counter­clockwise) until you are comfortable with higher speeds.
Getting Started
Before the first use, you must charge your scooter completely. This should take approximately 8 to 12 hours. Please refer to the Getting to Know Your Scooter section for information on how to charge your scooter.
Getting On/Off
Before getting on or off your scooter, always make sure that the keys are not in the ignition and that the scooter is off. This is a safety measure to prevent any unwanted injury due to accidental engaging of the levers.
For easier mounting or dismounting, lift one of the arm rests before getting on or off. Return the arm rest to its normal position before operation. Before operating your scooter, ensure that you are seated in a comfortable position.
IMPORTANT! Do not use the handlebars or the tiller when mounting or dismounting the scooter. For support, please use the arm rests!
Operating Instructions
Before going on your first trip, spend some time to practice handling your scooter. Find an open area with plenty of room and no obstacles around. It is recommended that you have a friend or family member assist you until you are comfortable to operate the scooter on your own.
Forward and Reverse
First, make sure you are seated comfortably. Put the key into the ignition and turn the scooter on. You will know that the scooter is active when the LEDs light up on the control panel. Set your scooter to the lowest speed possible. You may adjust the speed once you are comfortable with operating the scooter.
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Page 13
Start by gently squeezing the right lever. Gradually apply more pressure to the lever and the scooter will begin to pick up speed. If you have set your speed to the lowest, your top speed will be restricted.
Once you are in motion, gently release the lever and the scooter will smoothly come to a stop. Repeat moving forward and braking a few times to get used to the motion.
Next is to practice reversing. To reverse, gradually squeeze the left lever. Same as before, the more pressure applied to the lever, the faster the scooter will move. Practice reversing and stopping a few times to get used to the motion.
WARNING! Make sure that there are no obstacles, curbs, or angled slopes behind you before reversing! Practice reversing to get used to judging your environment.
Steering
Steering the scooter is effortless and simple. Before you begin your practice, ensure that there are no obstacles in the way.
To steer, simply rotate the tiller (handlebars) to the desired direction; the more you rotate, the more sharp the turn. Begin by slowly moving forward and steering the tiller at small angles; gradually increase the angle for your turn to familiarize yourself with the maximum turning radius.
Practice by making gentle “S” patterns in both forward and reverse as much as necessary.
When steering through limited spaces (such as a doorway or hallway), make sure to mind the width of your scooter. When approaching doorways, take your time and proceed slowly to prevent injury to yourself or others or damage to the scooter.
When turning around corners, always keep a safe distance from the wall you are turning towards. Most importantly, you want to ensure that your rear tires will clear the corner without getting caught.
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Page 14
WARNING! Never turn sharply while the scooter is at top speed! Always exercise caution when taking corners. Failure to do so can cause injury and damage.
Extra Guidelines
Ramps / Slopes
The stability of your scooter is governed by several factors such as seating position, the angle of the slope, your height and your weight. Take caution when approaching an incline and always head directly (perpendicular) to the slope and not at an angle. While on the slope, avoid making any turns. When heading down a slope, keep your scooter’s speed setting to slow.
Grass / Gravel
Your scooter was not designed to travel off-road and therefore caution should be exercised when traveling on grass, sand, or loose gravel. If necessary, always travel at a slow pace to prevent slipping.
IMPORTANT! You should never operate your scooter in wet weather or on wet surfaces.
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Page 15
Tiller Adjustment Lever
Seat Adjustment Lever
Adjustment
Tiller Angle Adjustment
The Tiller Adjustment lever is located on the side near the bottom of the tiller. To adjust the tiller angle, hold onto the handlebar with one hand to support its weight, pull the tiller adjustment lever outwards and adjust the angle of the tiller to the desired position. When you are comfortable, tighten the lever once more.
IMPORTANT! Do not drive the scooter if the tiller is not secured.
Tiller Adjustment Lever
Seat Adjustment
You can adjust the seat to be either closer or further from the tiller. The seat adjustment lever is located on your seat to the left hand side where your left leg rests. To adjust your seating distance, simply lift the lever and adjust your seat accordingly. Once released, the seat will automatically lock into place.
Seat Adjustment Lever
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Page 16
Swivel Adjustment
Seat Removal Nut
Armrest Adjuster
Armrest Adjustment, Swivel Adjustment and Seat Removal
Swivel Adjustment
An alternative solution to mounting the scooter is to turn the seat outwards to sit comfortably and then turn the seat back to original position.
To do this, simple pull the swivel adjustment lever outwards and the seat will loosen. Adjust the seat appropriately and return the lever to its original position.
Armrest Adjustment
The armrests can easily be adjusted to be wider. To do this, turn the armrest adjustment knob found behind the seat near the bottom counter-clockwise to loosen the armrest. Adjust the armrest to the desired width and then retighten the knob by turning clockwise. The knob should be not be over tightened.
IMPORTANT! Never operate your scooter without armrests securely in place.
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Page 17
Seat Removal Nut
The seat removal nut is located on the shaft holding the seat, next to the swivel adjustment lever. This is a grub screw that engages a groove on the shaft that the seat is mounted on. By loosening or removing this nut, you will be able to remove the seat. Upon reinstallation, pay extra attention to ensure that the nut is secured and in place.
Seat Removal
After you have removed the seat removal nut, the seat can be easily removed by lifting the chair off of the shaft it rests on.
Disassembling the Scooter for Transport or Storage
The Boomerbuggy series was designed to be easily dismantled for efficient transportation and storage. Disassembling the scooter requires very little time and effort. Simply follow these steps to disassemble your scooter.
First remove the seat. You can do so by loosening the swivel lever and
removing the grub nut that holds the seat to the shaft. Please refer to the Seat Removal for more information.
With the seat removed, release the tiller lever and fold the tiller all the
way down to where the seat used to be.
IMPORTANT! While disassembled, the scooter is still considerably heavy due to the batteries and motor. When transporting the scooter, always have someone around to assist you!
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Page 18
Batteries and Charger
The Boomerbuggy series utilizes two maintenance free, seal lead acid batteries. Battery performance is affected by various factors including: temperature, terrain, the weight of the user, and overall usage for the batteries. The battery level indicator/gauge is only a guide for judging the amount of charge in the batteries. The true charge of the batteries will display once the scooter is in drive.
To optimize the battery life, only charge the scooter once the batteries are at approximately 20%.
When storing your unit, be sure to charge the scooter at least once every two weeks to optimize the battery’s life. Leaving the batteries completely discharged can cause irreversible damage to the batteries and may need to be replaced.
Charger and Charging
To charge your scooter, first make sure that the bike is off. Plug the charger into the charging port (refer to the Getting to Know Your Scooter section) and then plug the charger into the outlet. Once connected, a red light should appear on the charger; this indicates that the scooter is being charged. When the scooter is completely charged, the charger will automatically terminate the charge and the light will turn green.
The charger requires a minimum feedback voltage signal from the batteries in order to begin the charging cycle. If your batteries are severely discharged for a long period of time, the charge may not receive the necessary feedback and therefore the batteries will not charge. If this occurs, contact your nearest Daymak dealer for assistance.
IMPORTANT! Always insert the charger into your scooter before the outlet! Failure to do so has a possibility of short circuiting the scooter.
IMPORTANT! Never let your batteries completely discharge. Doing so can result in irreversible damage to the batteries.
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Page 19
Maintenance and Troubleshooting
Lubrication
In six-month intervals, you should lubricate the following parts with multipurpose grease or similar lubricant: seat pivot post and seat release lever.
CAUTION! Do not lubricate the transaxle gears!
Wheels and Tires
The wheels have split rims, which allows easy puncture repair. To change the wheel, remove the center 13mm bolt and slide the wheel off its axle. When refitting the wheel, be sure to use a locking washer and use locktite or a similar adhesive. When changing a tire, the inner tube must be deflated. Remove the four bolts from the wheel and split the rim.
General Maintenance
Every six months, you may need to tighten certain nuts and bolts. The reason for this is due to the fact that operating the scooter will cause a lot of vibrations, which can gradually loosen the nuts and bolts on the scooter. The following are some areas that require attention: tiller base bolts, wheel axle bolts, armrest adjustment bolts, wheel-to-axle bolts, and etc.
Troubleshooting Check List
If you are having trouble operating your scooter, please check the following:
The unit is switched on
All plugs and connectors are firmly fixed
Battery is fully charged
Free wheel lever is engaged
Battery fuses are not blown
If the problems persist, try resetting the circuit breaker. The circuit breaker can be found under the rear chassis cover and is accessible through a port hold under the seat.
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Page 20
Q2
TIP122
Q3
2N5401
R37 4.7K
R36
15K
C1
220uF/50V
9
8
14
U1C
LM339
9
8
14
U2C
LM339
11
10
13
U1D
LM339
11
10
13
U2D
LM339
C2
47uF/50V
R35
1K
D7 4148
VCC
LED8
red
LED6
yellow
LED7
yellow
LED5
blue
R4
5.1K
R3
5.1K
R2
5.1K
R1
5.1K
5
4
2
312
U1A
LM339
5
4
2
312
U2A
LM339
7
6
1
U1B
LM339
7
6
1
U2B
LM339
R22
5.1K
R20
5.1K
R18
5.1K
R16
5.1K
20V
R31
10K
R19
5.1K
R17
5.1K
R15
5.1K
R21
5.1K
VCC
D6 1N4007
1
2
J16
KEY
1
2
J15
For logic circuit or battery charger
123
J14
123
4
5
6
7
8
9
10
J1
From controller
1
2
3
4
5
J12
F/B S tatus
1
2
3
4
5
J13
battery charg e
1
2
J6
High/Low Change Key
1
2
J2
push switch Key
1
2
3
J7
F\B £¬pot
1 2 3 4 5 6 7
J5
1 2 3 4 5
J3
1 2 3
J4
1 2
J8
1 2
J10
1 2
J9
R31
R32
S6
S5
LED1
red
LED3
yellow
LED2
yellow
LED4
blue
F1F2B1
B2
PE1
PE2
PE3
PE4
pin3
pin8
pin4
pin13
pin8
pin9
pin16
pin6
pin8
pin7
pin12
VCC
pin3
LED12
ºì
LED9
Ȯ
LED10
Ȯ
LED10
ºì
LED13
Ȯ
S4
LS1
SPEAKER
S2 S3
Q1
S8050
D4
1N4007
D3 1N4148
R43
4.3K
pin6
PE1
PE2
PE3
PE4
VCC
F1
F2
B1
B2
1
2
J11
***Bredk suddenly***
pin12
S7
VCC
pin4
pi13
VCC
Fuse 1
DS8
Charging electrical outlet
S1
F2
VCC
GND
pin12
VCC
R33
4.3K
R40
4.3K
R41
4.3K
R42
4.3K
pin9
R38
4.3K
D5
1N4007
D2 1N4007
pin16
R39 100
12V
R5
5.1K
VCC
DW1
1N4747AG
DW2
1N4742AG
VCC
R14 330
C4
0.1uF/63V
12V
VCC
20V
20V
pin4
R29
30K
R30
10K
R27
24K
R28
10K
R25
51K
R26
10K
R23
68K
R24 10K
12v
R12
10K
R13
10K
R10
9.1K
R11
10K
R8
8.2K
R9
10K
R6
6.8KR710K
12v
VCC
VCC
K1
SRD-24VDC-SL-C
VCC
½р»ªЖеПйµз¶¯³µЦЖФмУРПЮ¹«Л¾
Ö°Ôð
ÖÆÍ ¼
Éóͼ
ÉóºË
Ç©Ãû
ÈÕÆÚ
ͼºÅ
µç¶¯´ú²½³µ
¿ШЦЖПЯВ·Ф- АнН¼
R34
DS1 DS2 DS3 DS4 DS5
DS6
C3
0.1uF/63V
DS7
0-100K
0-5K
B+
B-
speed limit pot wiper input
Status LED output pin9
Horn input pin16
Electr omagne tic br ake input (brake -) pin6
mode switch input pin8
push switch input pin7
Inhibit input pin12
Keyswitch input (KSI) pin5
Pot high output pin3
Pot wiper input; 5V throttle input pin4
Pot low input Pin13
Indicator Light LAMPS KEYS
HORN
horn switch
***Sound abjustment***
BISWIFT
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Page 21
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Page 22
Warranty
One Year Limited Warranty
If assembled by a Daymak dealer, we will repair or replace parts within 90 days for parts and labour and 1 year for the motor and frame upon examination of
the defect by an authorized representative. All parts that are defective in material or workmanship are covered by a manufacturer’s warranty. The warranty does not cover the shipping costs of replacement parts.
Do not return faulty parts without prior consent. All transportation costs and shipping damaged incurred while submitting the parts for repair or replacement are at the discretion and are the responsibilities of the original purchaser.
Warranty Exclusions
The warranty will not cover the following:
Plastic fenders, tires (including flat tires), seats, and baskets
Damage caused by:
o Battery fluid spillage or leakage o Abuse, misuse, accident or negligence o Improper operation, maintenance and storage o Commercial use or use other than normal wear and tear o Repairs and/or modifications made to any part without specific,
written consent
o Circumstances beyond the control of Daymak Inc., such as theft,
natural disasters, or acts of war.
Disclaimer
We disclaim all liability and responsibility for incidental or consequential damages, including personal injury and property damage due to failure to follow the instructions written in this manual. The user is solely responsible for the care and maintenance of the scooter and its use.
Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Loading...