DAXOM UKDAX-11ST Installation & Operation Manual

Dear Daxom User,

In order to perform device’s function properly and for your safety

follow the instructions mentioned in the user manual of the device
during the mounting and the usage of the device.
In case of an unauthorized mounting and maintenance, the device
will be void from warranty cover. In addition to that, our company will
not be responsible from failure or an accident that may occur in the
device.
Please keep this user manual in good conditions for future reference.

The mounting of the water heater should be performed by an
authorized person. Please contact with our authorized dealers who
are powered by the authorized gas administration (EGO, İGDAŞ,

BOTAŞ, İZGAZ, etc). Do not attempt to operate the device by

yourself.
In case of you use LPG gas, do not mount your water heater in
places below the ground level.
Check whether your water heater conforms to the gas type you will
use or not.
Perform the hose connection in a safe way.
Be careful not to mount the water heater to the environments such as
clean air/ ventilation spaces of waste chimney, lightning and etc.
Consult with the authorized service or the companies about this
matter.
The device operates with 220-240Volt voltage. Ensure the network
voltage is 220-240 Volts.
Your water heater has no regular pipe connection since it is a
hermetic one. Therefore it is mandatory to use the system of fresh
air/waste gas pipe supplied with the device. Never connect it to the
regular chimneys.
The life time of the water heater which is determined by department
of industry is 10 years.

Safety Warnings

Thanks to its feature of digital constant water setting, the water
temperature will remain constant in the degree you set.
The fuel efficiency is reduced in low water temperature as your
device can operate in the desired constant water temperatures.
By the automatic water controlled on/off system, when the water
valve is opened, the water heater will be ignite automatically and the
hot water flow will be provided. When the water valve is closed, the
water flow will stop and the flame will be off automatically.
Thanks to its feature of operating with low pressure water, it will not
be affected by the low water pressure that occurs in the high
apartment flats. 2 mSS
The temperature control adjustment buttons make for users easy to
obtain different water temperature that they desire.
By the high pressure safety system, when the water pressure is

higher than it’s needed, safety valve will discharge the excess water

by become a part of a activity.
By the high temperature safety system, in case of the water getting
hotter than it is needed, the gas will be cut off automatically and the
damage of the water heater will be prevented.
The flame instability is prevented and the water is cooled after the
flame is off with the features of blowing inside the water heater before
the ignition (air fan blows air for 2~4 seconds before ignition) and the
blowing after service (air fan will go on blowing air for 10 seconds
after the water stops and the flame is off).
Thanks to the safe and reliable design of the combustion system, the
air is taken from outside by the fan for the purpose of the combustion
and it is sent out again after the combustion.
By the system of continuous electronic ignition, 100% success is
achieved in ignition.
The device is equipped with the multi-purpose safety system. Even if
the power is supplied to the water heater again in power failure, fan
failure, the blocking of the waste gas pipe or strong reverse wind
blowing the gas will be automatically cut and the automatic ignition
system will be disabled. In this case the water heater will need to be
restarted.

1. THE FEATURES AND THE CHARACTERISTICS OF
YOUR WATER HEATER

LCD display provides you to see the water temperature that you set.
When you press the On/Off button you can see the water flowing, the
fan turning, the temperature you set and the occurrence of the flame
on the LCD display.

UKDAX – 11ST MODEL

2. THE CONFIGURATION OF YOUR WATER HEATER .

Warning: The mounting of the water heater should be performed by
an authorized person. Please contact our authorized dealers who are
powered by the authorized gas administration (EGO, İGDAŞ,

BOTAŞ, İZGAZ, etc). Do not attempt to operate your device by

yourself.

Model:DAXOM

Type: UKDAX-11ST

Device type

C12

Gas category

II2H3 B/P

Gas type

LPG(G30/G31)

Natural Gas(G20)

Gas input pressure

30mBar

20mBar

Fan Power

36 W

Water flow(Δt=25K)

11 l/min

11 l/min

Nominal power P

19,15 KW

Nominal load Q

22,8KW

Gas consumption

2,12 kg/h

2,12 kg/h

Water pressure
Min.

0,2 bar

Max.

10 bar

Electrical connection

220-240 Volt AC 50Hz 36 W IP 44

Minimum water flow

2,7 lt/dk

Normal heat load

22,8 KW

Net weight

9,8 kg

Dimensions

522 x337 x 143

Connections

Cold water

1/2''

1/2''

Hot water

1/2''

1/2''

Natural gas

1/2''

1/2''

Waste gas

Ø60

Ø60

Air channel

Ø100

Ø100

3. TECHNICAL INFORMATIONS

4. THE MOUNTING OF YOUR WATER HEATER