DAXOM Navidens 50, Navidens 125, Navidens 70, Navidens 145 User Manual

DAXOM boilers provide following sufficiency
Gas Appliances Directive 2009/142/EEC
Boiler Efficiency Directive 92/42/ECC
Electromagnetic Compability Directive 2004/108/CE
Low Voltage Directive 2006/95/CE

CONTENTS

1.SECURITY INFORMATIONS AND WARNINGS .......................................................................................... 4

1.1 Warnings ......................................................................................................................................... 4

1.2 Warnings .......................................................................................................................................... 4

2 GENERAL INFORMATIONS ...................................................................................................................... 5

2.1 General Information ................................................................. Hata! Yer işareti tanımlanmamış.

2.2 Giving Information to Customer While Deliver the Device ............................................................ 5

2.3 Description ...................................................................................................................................... 5

2.4 Device Dimensions .......................................................................................................................... 6

2.5 Boiler Installation Distances ............................................................................................................ 8

2.6 Inside Structure Of the Device ........................................................................................................ 9

2.7 Technical Specificitions .................................................................................................................. 10

3 INSTALLATION....................................................................................................................................... 12

3.1 Installation ..................................................................................................................................... 12

3.2 Plumbing ........................................................................................................................................ 12

3.3 Natural Gas Line ............................................................................................................................ 12

3.4 Electrical Installation ..................................................................................................................... 13

3.5 Pipe Line ........................................................................................................................................ 13

4 SAMPLE INSTALLATION DIAGRAMS...................................................................................................... 15

4.1 Heating System with Boiler ........................................................................................................... 15

4.2 Cascade Heating System Diagram with Solar System ................................................................... 16

5 PIPE IMPLEMENTATIONS ...................................................................................................................... 17

6 ELECTRICAL PROJECT ............................................................................................................................ 18

7. ACCESORIES ......................................................................................................................................... 21

8 FIRST OPERATION ................................................................................................................................. 23

8.1 Heating Mode Selection ................................................................................................................ 23

8.2 Setting Time Programme ............................................................................................................... 23

8.3 Setting Room Temperature ........................................................................................................... 23

8.4 Mannual Using ............................................................................................................................... 23

8.5 Reset .............................................................................................................................................. 23

9 MAINTENANCE ..................................................................................................................................... 23

9.1 Periodic Controls that Users Must Be Made ................................................................................. 24

9.2 Service Maintenance Prosedures .................................................................................................. 24

9.3 Maintenance Warning Codes ........................................................................................................ 25

1. SECURITY INFORMATION AND WARNINGS

1.1WARNINGS

- This user manual is inseparable piece of your
device Please keep it in a place near the device
that is immediately got. In case of any lost or
damage, please supply new one with Isı Cihazları
Company.

- DAXOM / Naviels wall hung condensing boiler
must be installed by authorized person according
to the closing rules.

- Boiler must not be used except production
purpose. Manufacturer Company rejects
responsibilities of injuries and economic damages
cause from wrong installation of boiler, wrong
setting or not maintenance timely.

- When you open the packet box of the device,
firstly control if any damage at the device or not. In
case of any problem contact with the seller
company.

- Before making the installation of the device,
firstly be sure that plumbing is cleaned. Dirtiness
that is occurring inside the heating cycle causes
low efficiency and noise operation.

- Please careful about leaving min space while
making installation for interfere the system.

- Control the water level periodically from water
level indicator occurs at the boiler. Indicator must
be over 1 bar.

- If you observe water leakage at the boiler, close
the water valve immediately and contact with
authorized service.

- If the boiler will not be used for a long time, cut
off the electric supply and gas inlet of the boiler. If
there is freezing risk at water installation or boiler
system, you need to discharge water inside the
plumbing.

- Control the operation of the air conditioner of the
place that the boiler is placed at regular intervals.

-Boiler is designed for using at interior place. It is
not suitable for using at open environment places.

- Because of boiler is condensing type, be careful
that the condensing discharge line is connected
and not blocked.

- Make the authorized service maintenance your
boiler at least once a year.

1.2 Warnings

- If gas or smoke smell are sensed, do not operate
any electrical devices in case of gas leakage,
ventilate environment by closing gas valve and
contact with authorized people. Do not smoke at
the environment in no sense.

- Do not touch cover of boiler with wet hands or
bare foot?

- Do not certainly pull and twist or force cables
connected to boiler even it is no energy.

- Freezing prevention system occurs at the boiler
Because of this, do not cut off electric and close
the gas valve of boiler when the external
environment is cold.

- Do not absolutely start boiler cleaning before cut
off main electric supply.

- Do not keep flammable or explosive materials at
the boiler room.

- Do not certainly interfere safety device occurred
on the boiler. Do not deactivate for short term or
continuously.

-Be sure that pipe fitting is made correctly and not
leak gas to the environment.

-Do not certainly operate heater without water
inside plumbing.

2 GENERAL INFORMATION

2.1 General Information

-The user manual which is given with condensing
boiler is inseparable piece of the device. Because
of this, it must be kept carefully and it must be
kept in a place near the device that is immediately
got. In case of any lost or damage, it must be
supplied from DAXOM Company.

Any person except authorized person or person
who had education from authorized service must
not interfere to device.

Considering warnings inside the manual is
important for both your safety and safe operation
of the device.

Device must be operated by installing stated inside
the manual under necessary conditions of safety
and operating. Under these conditions DAXOM
trade mark boiler is less than 2 years warranty
cover by Manufacturer Company.

Using the device out of its purpose, using different
from conditions stated inside the manual, interfere
by unauthorized person and problems which cause
because of external factors such as (gas, electric
and etc) are evaluated as out of warranty.

The lifetime of the device determined by Ministry
of Customs and Trade is 10 years in case of obey to
user instructions. In the meantime manufacturer
and Seller Company obliged to meet service and
spare parts of user.

The first operation and controls of boiler must be
done by authorized service and product guarantee
must be done. Devices which are using before
doing warranty start by authorized service will be
no warrantable.

2.2 Giving Information to
Customer While Deliver the Device

Tell consumer about operation of the device,
significant points that must be careful before
operation of the system or during operation of
system, importance of periodic maintenance in

terms of performance and efficiency of device and
inform about maintenance agreement.

Explain user that necessary services contact
information is found inside user manual.

Deliver the user manual to consumer and tell him /
her that are needed to keep near the boiler.

2.3 Description

DAXOM Navidens boilers are condensing boilers
that are used by installing wall are designed as
heating water inside heating system with NG or
LPG and also meet the need heat demand of a
boiler through this water.

DAXOM Navidens condensing boilers are also
enable for coupled solar energy to boiler system.
On the other hand, they have necessary
substructure for heating swimming pools.

There is burner inside the boiler which provides
Combustion with aluminum casting hot bulb and
premix technology.

There is flow meter gas valve on the boiler which
determines and stops quantity of gas that obtains
necessary energy for heating. There are sensors at
the system for following inlet and outlet water
temperatures for the aim of determination of
boiler operation capacity.

On the other hand, for the aim of security control
of the system there are bottom water pressure
control wind pressure switch, drain valve, safety
thermostat and pipe gas temperature sensor.
Boilers’ ignition, flame monitoring, capacity
control, safety device and operation functions
occur by electronic control card.
It can be operated as connected external room
thermostat.
By the LCD panel on the boiler information can be
followed concerning to operation of the system.
(Instant operation capacity, boiler inlet, outlet
temperatures, etc)

2.4 Dimension of Device

Navidens 50-70

Navidens 125-145

a: Safety Valve Outlet
b: Plumbing Return
c: Gas Inlet
d: Plumbing Exit
e: Condensing Outlet
f: Cable Entry

2.5 Boiler Installation Distances