Davoline Telescopic Lux 1144 Instruction Manual
MODEL
COOKER HOOD
INSTRUCTIONS MANUAL
1144
-2-
In order to use the cooker hood efficiently;
*Pay attention to aluminum filters' cleaning periods and changing periods of carbon filters.
*Use the product at middle speed if high suction power is not necessary.
* In order to ensure that ventilation occurs correctly, windows of the kitchen should be kept closed.
-11-
1) Front panel
2) Comand panel
3)
4) Illumination
Aluminum Cassette Oil Filter
Picture 1
INTRODUCTION OF DEVICE
Touch control product
1144 - 60
Figure 1
1144
(5 SPD)
1144
(3 SPD)
1
2
3
4
YELLOW/GREEN
BROWN
BLUE
WHITE
FUSE
WHITE
LAMP
ELECTRONIC CIRCUIT
BLACK
BROWN
WHITE
BLUE
RED
CAPASITOR
5 µ
f
/400V
INPUT : 220 - 240 V AC / 50 Hz
M
FUSE
CONTROL PANEL
FUSE
BLACK
GREY
YELLOW
WHITE
BLUE
RED
BROWN
5µF/400 V
BROWN
YELLOW/GREEN
BLUE
10
10
10
M1~
CAP
NM1M2M3M4
M5
LAMP
BUTTONBOX
ELECTRONIC CIRCUIT (FOR 5 SPEED)
CONTROL PANEL
WHITE
WHITE
INPUT : 220 - 240 V AC / 50 Hz
Cleaning Periods of Aluminum Filter
Filter should be cleaned when “C” signal appears on the Display or each 2-3 weeks (in
accordance with the usage frequency). After cleaning and replacing filters to their places,
button should be pressed for more than 3 seconds (when the product is off) in order to
remove the “C” signal. “E” signal will appear on Display and product will start working at normal
position. If you want to continue using your product without removing “C” signal, active speed will
appear for 1 second when you press button, then “C” signal will appear once more and the
motor will continue operating.
NOTE: “C” signal will appear after you use the product for 60 hours.
Cleaning Periods of the Aluminum Filters:
Filters should be cleaned when “ ” signal appears on Display or (according to usage) each 2-3
weeks. In order to remove “ ” signal, after the filters are cleaned and replaced to their place, press
button more than 3 seconds (when the product is at off position). Letter “E” will appear on
Display and the product will operate as normal. If you would like to continue using the product
without deleting “ ” signal, when you press the button active speed will appear for 1 second,
then “ ” signal will appear once more and the motor will continue operating.
NOTE: “ ” signal will appear after usage of the product for 60 hours.
5 Speed Digital Control
3 Speed Digital Control
50
40
41
20
600
Max475Min
31
0
284
223
280
28
22
100
500
148
220
456
20
50
40
20
9
00
Max475Min325
284
223
280
28
22
90
800
148
220
755
26
41
1144 - 90
Loading...