DaVinci W001376776 Installation & Assembly

Bookcase (5926) - Assembly and Operation Manual

Congratulations on purchasing an MDB Family product. This product will provide many years of service
if you adhere to the following guidelines for assembly, maintenance and operation. This product is for
residential use only. Any institutional use is strictly prohibited.

Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for
assembling the product in addition to the Allen wrench included in the hardware box. Do not use power
screwdrivers. All of our products are made from natural woods. Please understand that natural woods
have color variations which are the result of nature and not defects in workmanship.

DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARD­WARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLIS­TIC VARIATIONS.

IMPORTANT:

As with all infant and baby furniture, it is
important to check fasteners, screws, and
bolts periodically for tightness. Parents
should ensure a safe environment for their
children by checking the furniture regularly
before placing a child in the product.

revised 26JAN2015

page 1

A. Top & bottom front panel (2)

B. Top & bottom rear panel (2)

C. Adjustable shelves (3)

PARTS

D. Stationary shelves (2)

E. Back panel

I. Right drawer side J. Left drawer side

F. Left panel

K. Drawer Front

L. Drawer Back

M. Drawer Bottom

G. Right panel

N. Top panel

page 2

HARDWARE

O. Metal shelf peg (12) P. Cam lock bolt (22) Q. Cam lock (22) R. Drawer knob (2)

S. 3/8” Phillips
head screw (46)

V. Left panel glide

W. Right panel glide

Screw eight cam lock bolts (P) into

1

the threaded inserts on each side
panel (F) and (G). The side panels
are labeled left and right for easy

identification.

Use three Phillips head screws (S)
to attach the left (V) and right (W)
panel glide. The glide wheel should
face the front of the bookcase with
the angled part to the top.

T 1 1/4” Phillips
head screw (4)

U. 1 1/4” Phillips
head screw (2)

X. Right drawer glide

Y. Left drawer glide

ASSEMBLY INSTRUCTIONS

P

P

Tools Needed

(not included)

Phillips

screwdriver

GF

P

P

S S

S S

W

V

S

S

P

V W

P

P

P

page 3

Insert cam locks (Q) and attach the

2

top and bottom front panels (A), top
and bottom rear panels (B) and the
two stationary shelves (D) to the
left side panel (F). Rotate the cam
locks to secure the parts. Be sure
that the cam locks on the front
panels face to the inside of the
bookcase.

Q

B

A D

B

A

F

P

Insert cam locks (Q) in the top and

3

bottom front panels (A), top and
bottom rear panels (B) and the two
stationary shelves (D). Align the
right side panel (G) over the
assembly so that all of the dowels

and cam lock bolts fit into position.
Push the panel firmly in place and

rotate the cam locks to secure the
panel.

D

P

B

D

G

B

D

Q

A

A

page 4

Screw four cam lock bolts (P) into the

4

threaded inserts in the top panel (N). Insert
four cam locks (Q) into the holes at the top
of the case. Align the top panel over the
dowels and push it into position. Tighten
the cam locks to secure the top.

Q

N

Q

P

N

P P

Attach the back panel (E) to the case with

5 6

thirty four Phillips head screws (S).

P

Insert the metal shelf pins into the holes at
the desired height in the side panels and
place the adjustable shelves (C) on top of
them.

E

S

O

page 5

7

DRAWER ASSEMBLY INSTRUCTIONS

7a

Screw two cam lock bolts (P) into
the threaded inserts in the drawer
front (K). Insert cam locks (Q) into
the drawer sides (I) and (J) then
rotate the locks to secure the sides.

P

J

I

Q

K

Q

P

7b

Slide the drawer bottom (M) into
the grooves in the sides and front of
the drawer.

M

page 6

7c

Position the back panel (L) on the
drawer assembly and secure it with
four Phillips head screws (T).

T

L

T

7d

7e

Attach the left (Y) and right (X)
drawer glides with three Phillips
head screws (S) each. Be sure the
glide wheel is towards the back of
the drawer.

Y

S

Use the two Phillips head screws
(U) to attach the drawer knobs (R).
Then slide the drawer into the case.

X

8

S

U

R

page 7

9

FURNITURE ANTI-TIPPING KIT INSTALLATION

Serious or fatal crushing can occur when furniture tips over on children. To help prevent tip-over, follow the
steps below to install this anti-tipping strap.

WARNING

Serious or fatal crushing injuries can occur
from furniture tip-over. To help prevent
tip-over:

Place heaviest item in the lowest drawers.

Unless specifically designed to accommodate,

do not set TVs or other heavy objects on
top of this product.
Never allow children to climb or hang on
drawers, doors, or shelves.
Never open more than one drawer at a time.
(OR)
Do not defeat or remove the drawer interlock
system.

Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.

This is permanent label. Do not attempt to remove!

9a 9b

Locate a 2” x 4” stud behind the wall,
and make a mark.

Tools Needed (not included)

X 1

X 1

X 2

X 1

PencilStubby

Screwdriver

Phillips

screwdriver

Install the strap on the wall with long screw and
washer.

2” x 4” wall stud

page 8

9c

Install the other end of strap on the
back of dresser with short screw and
washer into the wood framing of the
dresser.

KEEP THIS MANUAL IN A SAFE

PLACE FOR FUTURE REFERENCE.

READ ALL INSTRUCTIONS BEFORE
USING THE PRODUCT. KEEP THE
INSTRUCTIONS FOR FUTURE USE.

Storage:

Pine woods exchange moisture with the air adjusting to major

•

changes in room temperature and humidity. Therefore, it is best
to place your furniture away from heating or air-conditioning
vents.
Sunlight is not friendly to solid wood furniture and prolonged

•

direct exposure to harsh sunlight can discolor the finish. Be
careful not to place your furniture in direct sunlight for extended
periods of time. As with all your fine furniture, blot up spills
immediately.

Care and Cleaning:

•

Do not scratch or chip the finish. Do not use abrasive chemi-

cals for cleaning. Clean with mild soap on a damp, soft rag.

Rinse and dry thoroughly. If you ever refinish this furniture, be
sure to use only a non-toxic finish specified for children’s prod­ucts. If you choose to refinish this furniture, the warranty will be

voided.

Registering your product is even easier than before.
You can register your product on our website at :
www.themdbfamily.com

IF YOU WOULD LIKE T
REPLACEMENT OR MISSING
PLEASE VISIT US AT:

WWW.THEMDBFAMILY.COM

O ORDER

OR YOU CAN CONTAC

T US BY MAIL:

MDB FAMILY
855 WASHINGTON BLVD.
MONTEBELLO, CA 90640

Finish

page 9