Page 1
3-Drawer Changer (5925) - Assembly and Operation Manual
Congratulations on purchasing an MDB Family product. This product will provide many years of service
if you adhere to the following guidelines for assembly, maintenance, and operation. This product is
for residential use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling the product in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers. All of our products are made from natural woods. Please understand that natural woods have color
variations which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARDWARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS.
!
WARNING!
READ ALL INSTRUCTIONS BEFORE USE OF THE CHANGING TABLE, ADD-ON
CHANGING UNIT, OR CHANGING PAD.
revised 05MAR2015
page 1
Page 2
PARTS
K. Back Board
WARNING:
USING ANY POWER TOOLS TO ASSEMBLE THIS FURNITURE MAY POTENTIALLY STRIP THE WOOD. DO NOT USE.
L. Changer Board
H2. Cam Bolts x 10 H3. Cam Locks x 10
H13. 1-3/4” Bolts x 16
H12-1. Safety Strap Screws with
washers x 2
M. Back Panel Side
Support Rail x 2
N. Changer Pad
page 2
Page 3
ASSEMBLY INSTRUCTIONS
1
Install left panel glides (H10) on the left end panel (D) and right panel glides (H8) on the right
end panel (E) with wood screws (H6).
H10
H10
H6H6H6
H10
H10
D
H8
H8
H8
E
H6 H6 H6
H8
Do not overtighten.
page 3
Page 4
2
Insert nylon dowels (H1) into support
rails (J and J1).
H1
J1
H1
B
H1
J
H13
H13
H13
H13
J
H13
H13
A
H1
J
H13
J
D
Align nylon dowels (H1) on support rails (J&J1) to the
appropriate pre-drilled holes on left end panel (D).
Align top rear panel (A) and top front panel (B) to the
appropriate pre-drilled holes on left end panel (D).
Use 1-3/4” bolts (H13) to fasten panels (A&B) and
rails (J&J1) to left end panel (D).
H13
J1
Do not overtighten the bolts.
page 4
Page 5
3 4
M
K
M
Place back panel side supports (M) on left
and right side of back board (K) and slide in
back board as shown in the above illustration.
L
Slide in changer board (L) to changer
assembly.
H13 H13 H13
A B
H13
H13
H13
H13H13
E
5
Align A, B, J and J1 to the right end panel
(E) and fasten with 1-3/4" bolt (H13) as
illustrated.
J
page 5
Page 6
6
C
Insert cam bolts (H2) into the top changer panel (C).
(back)
H3H3 H3
H3
H2 H2 H2 H2
C
Attach top changer panel (C) to the changer assembly
using 4 cam bolts (H2) and cam locks (H3).
7
DRAWER ASSEMBLY INSTRUCTIONS
7a 7b
H3
F
(R)
H2
H3
G
F
(L)
H2
I
page 6
Page 7
7c 7d
H
H7
7f
H7
H
7e
H6
H9
8
* Slide the drawers into the changer and
check that they glide smoothly.
H5
H6
H11
H4
9
H12-1
H12
A / B
H12
N
page 7
Page 8
10
FURNITURE ANTI-TIPPING KIT INSTALLATION
Serious or fatal crushing can occur when furniture tips over on children. To help prevent tip-over, follow the
steps below to install this anti-tipping strap.
WARNING
Serious or fatal crushing injuries can occur
from furniture tip-over. To help prevent
tip-over:
Install tipover restraint provided.
Place heaviest item in the lowest drawers.
Unless specifically designed to accommodate,
do not set TVs or other heavy objects on
top of this product.
Never allow children to climb or hang on
drawers, doors, or shelves.
Never open more than one drawer at a time.
(OR)
Do not defeat or remove the drawer interlock
system.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
This is permanent label. Do not attempt to remove!
Tools Needed (not included)
10a 10b
Locate a 2” x 4” stud behind the wall, and
make a mark.
Install the strap on the wall with long screw and
washer.
X 1
Screwdriver
X 1
PencilStubby
X 1
X 2
Phillips
screwdriver
2” x 4” wall stud
page 8
Page 9
10c
Install the other end of strap on the
back of dresser with short screw
and washer into the wood framing
of the dresser.
Finish
The recommended maximum weight of
the occupant is 30 lbs on changing table.
KEEP THIS MANUAL IN A SAFE
PLACE FOR FUTURE REFERENCE.
READ ALL INSTRUCTIONS BEFORE USING THE
PRODUCT. KEEP THE INSTRUCTIONS FOR
FUTURE USE.
IMPORTANT:
As with all infant and baby furniture, it is important to check fasteners, screws, and bolts
periodically for tightness. Parents should ensure a safe environment for their children by
checking the furniture regularly before placing a child in the product.
page 9
Page 10
ONE YEAR LIMITED WARRANTY:
WARNING!
FALL HAZARD
TO PREVENT DEATH OR SERIOUS
INJURY, ALWAYS KEEP CHILD WITHIN
ARM’S REACH.
READ ALL INSTRUCTIONS BEFORE ASSEMBLING THIS
PRODUCT. KEEP THE MANUAL FOR FUTURE USE.
WARNING:
• Always secure this pad to the changing surface (removable
or stationary changing tray) by placing the pad within the
boundaries of the tray. See instructions.
• The pad is to be used on a surface that is level, stable and
structurally sound with a minimum surface dimension of
34” by 17”.
• Read all instructions before use of the changing table.
• Do not use changing table if it is damaged or broken.
• This product is not intended to be used as a changing table
without adult supervision. Use of the product without this
may result in death or serious injury to your child from falling.
Follow all instructions on attaching and using the changing
table.
• Only use the pad provided by MDB FAMILY.
• The maximum weight of the child for which the changing
table is intended is 30 lbs.
• Stop using this changing table when the child is able to sit
up or roll over.
• As with all infant and baby furniture, it is important to check
fasteners, screws, and bolts periodically for tightness.
Parents should ensure a safe environment for their child by
checking the furniture regularly before placing the child in the
product.
• When using this product, always secure the child with the
safety strip.
We will replace any missing parts at the time
of purchase or any defective item within a
one year period from the date of original
purchase. Please keep your receipt so that
we may process your warranty request. This
warranty only covers new units with original
packaging and ownership, and is not transferable. It does not cover any used, secondhand or demo models.
This warranty does not cover any damaged
or defective parts that result from installation
and assembly, normal wear and tear, abuse,
negligence, improper use or alteration to the
finish, design, and hardware. The specific
legal rights of this warranty may vary from
state to state. Some states do not allow any
exclusion or limitation of incidental damages. Some states do not allow limitation on
how long an implied warranty lasts.
Storage:
Pine woods exchange moisture with the air adjust-
•
ing to major changes in room temperature and
humidity. Therefore, it is best to place your furniture
away from heating or air-conditioning vents.
Sunlight is not friendly to solid wood furniture and
•
prolonged direct exposure to harsh sunlight can
discolor the finish. Be careful not to place your furniture in direct sunlight for extended periods of time. As
with all your fine furniture, blot up spills immediately.
Care and Cleaning:
Do not scratch or chip the finish. Do not use abra-
•
sive chemicals for cleaning. Clean with mild soap on
a soft rag. Rinse and dry thoroughly. If you ever
refinish this furniture, be sure to use only a non-toxic
finish specified for children’s products. If you choose
to refinish this furniture, the warranty will be voided.
WARNING!
FALL HAZARD
To prevent death or
serious injury, always
keep child within arm’s
reach. Never leave child
unattended and always
use restraining system.
Registering your product is even easier than
before. You can register your product on our
website at : www.themdbfamily.com
IF YOU WOULD LIKE TO ORDER
REPLACEMENT OR MISSING
PLEASE VISIT US AT:
WWW.THEMDBFAMILY.COM
OR YOU CAN CONTACT US BY MAIL:
MDB FAMILY
855 WASHINGTON BLVD.
MONTEBELLO, CA 90640
PARTS
page 10
Page 11
Restraint System
WARNING:
During the diaper changing process, be sure always to keep one hand on the baby to prevent the
baby from falling off the changing pad. Falling from the changing pad could cause severe injury or
even death to the baby.
Step 1. Step 2.
Place a baby on the pad with his/her bottom on the
top of the diaper. Safely secure the baby on the pad
with the safety straps and buckle on the pad. This
helps prevent the baby from falling off the pad, which
can result in severe injury or even death of the baby.
Remove the dirty diaper from the baby.
Step 3. Step 4.
Push the baby’s legs forward and create a cavity
under the baby’s bottom. Clean the baby.
Reattach the new diaper to a clean and happy
baby!
page 11
Loading...