Roxy Crib (M5941) - Assembly and Operation Manual
Congratulations on purchasing this product. This product will provide many years of service if you adhere to
the following guidelines for assembly, maintenance and operation. This product is for residential use only.
Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling
the product in addition to the Allen wrench included in the hardware box. Do not use electric drills or power
screwdrivers. Don not overtighten screws and bolts. All of our products are made from natural woods. Please
understand that natural woods have color variations which are the result of nature and not defects in
workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARDWARE.
YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS.
Unpack and separate all parts and different size bolts. All fastener holes have been pre-drilled or have metal
inserts. No drilling by the customer is necessary. Be sure to tighten all bolts firmly. Ask your dealer or contact
us for replacement of missing parts if needed.
A Back panel
C Wood rail
D Spring frame
*Style of Spring frame
may be different
B Right headboard
C Wood rail
E Left headboard
revised 12-2009
F Front panel
Page 1
I. 1 1/2” Wood Screws
Quantity : 6
S-1. 2 1/4” Machine Bolts
Quantity : 6
S-2. Barrel Nuts
Quantity : 4
Page 2
Headboard Preassembly
Page 3
X
B
N
left
E
S-1
C
S-2
C
O
C
S-1
X
S-2
Insert 4 barrel nuts S-2 into the holes at the
ends of the two wood rails C.
Attach the rails to the headboards B & E
with four 2 1/4” Allen head bolts S-1. Use
the Allen wrench R.
Page 4
U
V
U
V
back panel A
T
T
nel.
T
T
back panel A
back pa-
A Back panel
T
front panel
front panel and
back panel
front panel
back panel A
F Front panel
Page 5
S-1
F
Use two 2 1/4” machine bolts S-1 to secure
7
S-1
the front panel F.
Do not overtighten.
8
9
10
Page 6
10
11
12
Slide the drawer in and out
to make sure it glides smoothly
Page 7
KEEP THIS MANUAL IN A
SAFE PLACE FOR
FUTURE REFERENCE.
Before placing your mattress in the
crib, you can make your own mattress
protector by cutting the cardboard
packing insert to 27”x 51”. Place it on
the spring frame under the mattress to
extend the life of the mattress.
Attach casters to the legs of the crib.
You may place casters with stoppers
in any position that is most convenient
to you.
CAUTION: ANY MATTRESS USED IN THIS
CRIB MUST BE AT LEAST 27-1/4 INCHES BY
51-5/8 INCHES WITH A THICKNESS NOT
EXCEEDING 6 INCHES.
Please refer to the label (sample below) on the inside face
of the headboard. Record the model/ item number and
serial number of your crib, the name of the store where
you made the purchase , the date of purchase and the
wood finish in the box to the lower right.
XXXX
XXXXXXXX
XX/XXXX
SAMPLE LABEL
WE WILL ASK YOU FOR YOUR SERIAL NUMBER
FOR ALL WARRANTY AND REPLACEMENT PART REQUESTS.
PLEASE REFER TO THE LAST PAGE OF THIS INSTRUCTION
SHEET FOR WARRANTY INFORMATION. KEEP THIS MANUAL
INSIDE THE PLASTIC HOLDER ATTACHED TO THE MATTRESS
SUPPORT FOR FUTURE REFERENCE.
Model Number:
Serial Number:
Store Where
Purchased:
Date of Purchase:
Wood Finish:
Please read the Caution and Warning
Statements insert before using your crib.
Page 8
ONE YEAR LIMITED WARRANTY:
WARNING:
Failure to follow these warnings and
the assembly instructions could result
in serious injury or death.
READ ALL INSTRUCTIONS BEFORE ASSEMBLING
CRIB. KEEP THE MANUAL FOR FUTURE USE.
WARNING:
Infants can suffocate on soft bedding. Never add a pillow, comforter or padding.•
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed •
on their backs to sleep, unless otherwise advised by your physician.
Strings can cause strangulation! Do not place items with a string around a •
child’s neck, such as hood strings or pacifier cords. Do not suspend strings over
a crib or attach strings to toys.
To help prevent strangulation tighten all fasteners. A child can trap parts of the •
body or clothing on loose fasteners.
DO NOT place a crib near a window where cords from blinds or drapes may •
strangle a child.
When a child is able to pull to a standing position, set the mattress to the lowest •
position and remove bumper pads, large toys and other objects that could serve
as steps for climbing out.
For cribs with drop sides, after raising side, make sure latches are secure.•
For cribs with drop sides, DO NOT leave child in crib with side lowered. Be sure •
side is in raised and locked position whenever child is in crib.
When a child is able to climb out, reaches the height of 35 inches (90cm), the •
child should be placed in a youth or regular bed, and the crib shall no longer be
used.
Check this product for damaged hardware, loose joints, missing parts or sharp •
edges before and after assembly and frequently during use. DO NOT use crib
if any parts are missing, damaged or broken. Contact Da Vinci for
replacement parts and instructional literature if needed. DO NOT substitute parts.
DO NOT use a water mattress with this crib.•
For cribs equipped with teething rails, replace teething rail if damaged, cracked •
or loose.
If refinishing, use a non-toxic finish specified for children’s products.•
Never use plastic shipping bags or other plastic films as mattress covers be-•
cause they can cause suffocation.
Infants can suffocate in gaps between crib sides when used with a mattress that •
is too small.
Check fasteners periodically for tightness. Do not overtighten. This may cause •
distortion or breakage.
Use a crib as a crib, not as a play pen. Remember that a crib is not a substitute •
for a parent’s supervision.
When re-assembling the crib for your second child, please keep in mind that the•
screw holes will need to be filled in order for the screws to grip the wood, Talk to
your local hardware store or lumber yard about how to do this properly.
We will replace any missing parts at the time of
purchase or any defective item within a one year
period from the date of original purchase. Please
keep your receipt so that we may process your
warranty request. This warranty only covers new
units with original packaging and ownership, and is
not transferable. It does not cover any used,
secondhand or demo models.
This warranty does not cover any damaged or
defective parts that result from installation and
assembly, normal wear and tear, abuse, negligence,
improper use or alteration to the finish, design, and
hardware of the crib. The specific legal rights of this
warranty may vary from state to state. Some states
do not allow any exclusion or limitation of incidental
damages. Some stated do not allow limitation on
how long an implied warranty lasts.
Registering your product is even easier than
before. You can register your product on our
website at www.milliondollarbaby.com
Please DO NOT remove any wood screws in
the normal disassembly of the crib.
Care and Cleaning:
• Do not scratch or chip the finish. Do not use abrasive
chemicals for cleaning. Clean with mild soap on a soft
rag. rinse and dry thoroughly. If you ever refinish this
furniture, be sure to use only a non-toxic finish specified
for children’s products. If you choose to refinish this
furniture, the warranty will be voided.
Storage:
• Pine woods exchange moisture with the air adjusting to
major changes in room temperature and humidity.
Therefore it is best to place your furniture away from
heating or air-conditioning vents.
• Sunlight is not friendly to solid wood furniture and
prolonged direct exposure to harsh sunlight can discolor
the finish. Be careful not to place your furniture in
direct sunlight for extended periods of time.
• As with all your fine furniture, blot up spills immediately.
IF YOU WOULD LIKE TO ORDER
REPLACEMENT OR MISSING PARTS
PLEASE VISIT US AT:
WWW.MILLIONDOLLARBABY.COM
OR YOU CAN CONTACT US BY MAIL :
DA VINCI
855 WASHINGTON BLVD.
MONTEBELLO, CA 90640
Loading...