DaVinci Parker 2 Door Changer, 5152 Assembly And Operation Manual

Changer (5152) - Assembly and Operation Manual

Congratulations on purchasing an MDB Family product. This changer will provide many years of service if you adhere to the following guidelines for assembly, maintenance and operation. This changer is for residential use only. Any institutional use is strictly prohibited.

Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling the changer in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers. All of our changers are made from natural woods. Please understand that natural woods have color variations which are the result of nature and are not defects in workmanship.

DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARDWARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS.

!

WARNING!

READ ALL INSTRUCTIONS BEFORE USE OF THE CHANGING TABLE, ADD-ON CHANGING UNIT, OR CONTOURED CHANGING PAD.

!!PLEASE READ!!

Assembly of this furniture is easier with two people. Assemble furniture on debris free carpets or on the enclosed foam sheets to prevent scratching of finish. Using any power tools to assemble this furniture may potentially strip the wood. DO NOT

OVERTIGHTEN SCREWS. DO NOT USE THE CHANGING TABLE IF IT IS DAMAGED OR BROKEN.

READ ALL INSTRUCTIONS BEFORE USING THE PRODUCT. KEEP THE INSTRUCTIONS FOR FUTURE USE.

KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.

The recommended maximum weight of the occupant is 30 lbs.

revised 21JUL2015

page 1

PARTS

G. Foot (4)

C. Left and Right Door

(2)

H. Shelf (2)

A. Left and Right

Side Panel (2)

Side

View

B. Center Panel

D. Top Front Support Panel

E. Top Rear Support Panel

F1. Bottom Front Panel

J1. Bottom

Panel

J2. Top Panel

GG. Rear Top Support Panel

HH. Rear Bottom Support

Panel

K. Changing

Pad

page 2

HARDWARE

M. 2 3/4” Allen head bolt (8)

T. 5/8” Pan Head

Screw (4)

EE. Screw

Plate (2)

U. 5/8” Flat Head

Screw (8)

AA. Strap

FF. Allen

Wrench

N. 1 5/8” ﬂat head

screw (8)

X. Metal Dowel (8) Y. Door Peg (4)

BB. 1/2”

Washer (10)

JJ. Wood

Dowel (4)

DD. Door Catch (2)

KK. 1 1/4” Allen

head bolt (2)

R. Barrel nut (8)

S. 1” Phillips

Head Bolt (2)

ZZ. Knob (2)

Tools Needed

(not included)

Phillips

screwdriver

BARREL NUT - ADDITIONAL INSTRUCTION

1

All barrel nuts are threaded and come pre-attached to the bolts. Please ensure you have the correct number of barrel nuts needed as indicated in the instruction manual before assembly.

2

All barrel nuts are threaded and come pre-attached to the bolts. Please ensure you have the correct number of barrel nuts needed as indicated in the instruction manual before assembly.

page 3

3

Please use an Allen wrench to screw the bolt with the lock washer straight into the threaded nut until it is tight.

* The bolt may not be able to screw through the barrel nuts smoothly. It is suggested to use a flat screwdriver to stabilize and adjust the direction of the barrel nut.

Please follow the rest of the instruction steps in the instruction manual to complete the assembly

.

Flat Screwdriver

Allen wrench

ASSEMBLY INSTRUCTIONS

.

1

X

R

D

E

F1

HH

R

X

R

X6

R

X2

page 4

2

A

G

3

F1

G

NN

N

GG

HH

G

N

X2

JJ

BB

M

JJ

A

BB M

page 5

4

J1

HH

5

X

U

X

U

DD

B

* Attach the door catches

(DD) on both sides of

center panel (B).

U

X

page 6

6

HH GG

KK

* Metal dowels (X)

must be inserted into the pre-drilled holes in the bottom front panel

and rear panels (F1,

GG & HH).

7

T

B

T

BB

X2

F1

* Make sure to align the preattached metal dowel on the center panel (B) with the pre-drilled hole in the top panel (D).

F1

E

D

B

* NOTE: Do not tighten the top front panel (D) until after

A

BB

M

the door attachment in step 10.

BB

M

page 7

8

J2

9

F1

B

A

D

F1

X4

D

Y

page 8

ZZ

10

S

C. Left Door

EE

U

D

11

* NOTE: Make sure that the barrel nuts

(R) are placed in the proper position

in the pre-drilled holes in the support

panels (D, E & F1).

M

BB

M

BB

C. Right Door

S

U

EE

ZZ

* Tighten the top support rail (D) when

ﬁnished.

F1

A

JJ JJ

X

R R

X

E

D

page 9

12

* Stand the unit upright on its feet.

X2

A

H

13 14

AA

T

D

E

K

page 10

15

FURNITURE ANTI-TIPPING KIT INSTALLATION

Serious or fatal crushing can occur when furniture tips over on children. To help prevent tip-over, follow the steps below to install this anti-tipping strap.

WARNING

Serious or fatal crushing injuries can occur

Serious or fatal crushing i njuries can occur from furniture tip-over. To help prevent

from furniture tip-over. To help prevent

tip-over:

Install tipover restraint provided.

Place heaviest item in the lowest drawers.

Place heavies t item in the lowes t drawers.

Unless specifically designed to accommodate,

do not set TVs or other heavy objects on

do not set TVs or other heavy object s on

top of this product.

Never allow children to climb or hang on

drawers,

drawers, doors, or shelves.

Never open more than one drawer at a time.

(OR)

Do not defeat or remov e the drawe r interloc k

Do not defeat or remove the drawer interlock

system .

system.

Use of tip-over restraints may only reduce,

but not eliminate, the risk of tip-over.

This is permanent label. Do not attempt to remove!

doors, or shelves .

X 1

Tools Needed (not included)

Stubby

Screwdriver

Pencil

X 2X 1

Phillips

screwdriver

15D

Short

screw

15E

15C15A 15B

15C.1

3/16”

2”

15C.2

Long

screw

Finish

page 11

ONE YEAR LIMITED WARRANTY:

WARNING!

FALL HAZARD

TO PREVENT DEATH OR SERIOUS

INJURY, ALWAYS KEEP CHILD WITHIN

ARM’S REACH.

READ ALL INSTRUCTIONSBEFORE ASSEMBLINGTHIS PRODUCT. KEEP THE MANUAL FOR FUTUREUSE.

WARNING:

• Always secure this pad to the changing surface (removable or stationary changing tray) by placing the pad within the boundaries of the tray. See instructions.

• The pad is to be used on a surface that is level, stable and structurally sound with a minimum surface dimension of 34” by 17”.

• Read all instructions before use of the changing table.

• Do not use changing table if it is damaged or broken.

• This product is not intended to be used as a changing table without adult supervision. Use of the product without this may result in death or serious injury to your child from falling. Follow all instructions on attaching and using the changing table.

• Only use the pad provided by MDB FAMILY.

• The maximum weight of the child for which the changing table is intended is 30 lbs.

• Stop using this changing table when the child is able to sit up or roll over.

• As with all infant and baby furniture, it is important to check fasteners, screws, and bolts periodically for tightness. Parents should ensure a safe environment for their child by checking the furniture regularly before placing the child in the product.

• When using this product, always secure the child with the safety strip.

Storage:

Pine woods exchange moisture with the air adjust-

•

ing to major changes in room temperature and humidity. Therefore, it is best to place your furniture away from heating or air-conditioning vents. Sunlight is not friendly to solid wood furniture and

•

prolonged direct exposure to harsh sunlight can discolor the finish. Be careful not to place your furniture in direct sunlight for extended periods of time. As with all your fine furniture, blot up spills immediately.

Care and Cleaning:

•

WARNING!

FALL HAZARD

To prevent death or serious injury, always keep child within arm’s reach. Never leave child unattended and always use restraining system.

Registering your product is even easier than before. You can register your product on our website at : www.themdbfamily.com

IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING PLEASE VISIT US AT:

WWW.THEMDBFAMILY.COM

OR YOU CAN CONTACT US BY MAIL:

MDB FAMILY 855 WASHINGTON BLVD. MONTEBELLO, CA 90640

PARTS

page 12

Restraint System

WARNING:

During the diaper changing process, be sure always to keep one hand on the baby to prevent the baby from falling off the changing pad. Falling from the changing pad could cause severe injury or even death to the baby.

Step 1.

Place a baby on the pad with his/her bottom on the top of the diaper. Safely secure the baby on the pad with the safety straps and buckle on the pad. This helps prevent the baby from falling off the pad, which can result in severe injury or even death of the baby.

Step 3.

Push the baby’s legs forward and create a cavity under the baby’s bottom. Clean the baby.

Step 2.

Remove the dirty diaper from the baby.

Step 4.

Reattach the new diaper to a clean and happy baby!

page 13