Kalani Crib + Changer Combo (M5591) - Assembly and Operation Manual
Congratulations on purchasing a DaVinci product. This product will provide many years of service if you
adhere to the following guidelines for assembly, maintenance and operation. This product is for residential
use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling the crib in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers.
All of our products are made from natural woods. Please understand that natural woods have color
variations which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARDWARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC
VARIATIONS.
!
WARNING!
READ ALL INSTRUCTIONS BEFORE USE OF THE CHANGING TABLE, ADD-ON
CHANGING UNIT, OR CONTOURED CHANGING PAD.
!!PLEASE READ!!
Assembly of this furniture is easier with two people. Assemble furniture on debris free carpets or on the enclosed
foam sheets to prevent scratching of finish. Using any power tools to assemble this furniture may potentially strip
the wood. DO NOT OVERTIGHTEN SCREWS. DO NOT USE THE CHANGING TABLE IF IT IS DAMAGED OR
BROKEN.
Revised 08-2010
page 1
PARTS
B. Front PanelA. Back Panel
C. Right Side Panel
H. Crib Top Panel X 2
J. Post Bracket X 4
K. Spring Frame
D. Left Side Panel
F-2. Left
Back Post
F-3. Back
Post
E. Center Panel
G-1. Right
Front Post
G-2. Left
Front Post
F-1. Right
Back Post
G-3. Front
Post
L. Guardrail
M. Drawer
Front X 3
N. Right Drawer
Panel X 3
O. Left Drawer
Panel X 3
page 2
P. Drawer
Back X 3
Q. Drawer
Bottom
Board X 3
R. Dresser Back
Top Panel
S. Dresser Back
Panel
T. Dresser Front
Top Bar
U. Dresser Center
Bar X 2
Y. Dresser
Center Board
V. Dresser Middle
Bar X 2
W. Dresser Top
Bar
Z. Dresser
Top Board
X. Dresser Bottom
HARDWARE
H1. 3 -1/2” Allen Head Bolt X 8 H2. 2 -3/4” Allen Head Bolt X 2
H3. 2 -1/2” Allen Head Bolt X 16 H4. 1 -3/4” Allen Head Bolt X 8
Bar X 2
ZZ. Dresser
Shelf X 2
Tools Needed
(not included)
H5. 3/4” Allen
Head Bolt X 4
Phillips
screwdriver
H6. Barrel
Nut X 24
H7. 1-1/4” Wood
Screw X 12 H9. 1” Metal Pin X 18
H11. Cam
Lock X 12
H16. Right Panel Glide X 3 H17. Right Drawer Glide X 3
H18. Left Panel Glide X 3 H19. Left Drawer Glide X 3 H24. Allen Wrench
H8. 1” Metal Pin X 4 H10. Cam Bolt X 12
H12. 5/8”
Screw X 12
H13. 1/2” Small Wood
Screw for Glides X 36
H14. 1-1/8” Bolt
for Knob X 3
GUARDRAIL HARDWARE
H22. 1 -1/2” Allen Head Bolt X 4 H23. Lock WasherX 4
H15. Knob X 3
page 3
STEP 1. Assemble all drawers
N. Right
1A
O. Left
Drawer
Panel
H10
Drawer
Panel
H11
H10
H11
H10
M. Drawer
Front
H10
H10
1B 1C
Q. Drawer Bottom
Board
H11
H7
H7
H19. Left
1D 1E
H17. Right
Drawer
Glide
H13
Drawer
Glide
H13
H13
H13
P. Drawer Back
H7
H7
H14
H13
H13
H15
page 4
STEP 2. Attach posts to center panel
H6
H1
H2
H6
H1
H2
F-1. Right
Back Post
E. Center Panel
G-1. Right
Front Post
STE
P 3. Attach panel glides and metal pins to center and right side panel
H8
H13
H8
H13
H13
H13
H13
C. Right Side Panel
H13
H18
E. Center Panel
H8
H13
H13
H8
H13
H13
H13
H13
H16
H16. Right Panel Glide H18. Left Panel Glide
page 5
STEP 4. Attach dresser panels and
bars to right side panel
X
T
W
H9
H9
H6
H4
H3
H9
X
STEP 5. Attach dresser bars to
right side panel
H6
H6
H9
H3
H3
C. Right Side Panel
H6
R
S
H9
H4
H3
U
V
U
V
H9
H9
page 6
STEP 6. Attach dresser boards
to the dresser
Z. Dresser Top Board
Y. Dresser
Center Board
STEP 7. Attach center panel to
the dresser
H3
H9
H6
H6
H3
H9
H6
H3
H4
H9
E. Center Panel
H9
H9
H6
H3
H9
H4
H9
page 7
STEP 8. Attach posts to left side panel
H6
H1
H6
H1
H1
H1
STEP 9. Attach post brackets to posts
H6
H6
G-2. Left
front post
H6
D. Left Side Panel
H6
H1
H1
F-2. Left
Back Post
D. Left Side Panel
J
H12
H12
H12
E. Center Panel
J
J
H12
H12
H12
J
H12
H12
H12
page 8
STEP 10. Attach the crib top
panel and back panel
H4
H3
D. Left Side Panel
H3
H6
H. Crib Top Panel
H6
H4
STEP 11. Attach spring frame
A. Back Panel
H3
H3
H5
H5
H5
H5
K. Spring Frame
page 9
STEP 12. Attach the crib top
panel and front panel
H4
H3
H3
H6
STEP 13. Place dresser shelves
into the dresser
H. Crib Top Panel
B. Front Panel
H6
H4
H3
H3
ZZ
ZZ
page 10
STEP 14. Slide drawers to the
dresser
STEP 15. Place the contour changer pad
onto the changer
Use the specific changing pads that
conform to ASTM F2388-08a
Use changing pads no greater than
15-3/8"(W) x 27-3/4"(L) x 5"(H).
This products is not intended to be
used as a changing table without a
changing pad (no greater than
15-3/8"(W) x 27-3/4"(L) x 5"(H)).
Use of the product without this may
result in death or serious injury to
your child from falling. Follow all
instructions on attaching and using
the changing pad (no greater than
15-3/8"(W) x 27-3/4"(L) x 5"(H)).
page 11
The recommended maximum weight of
the occupant is 30 lbs on changing table.
KEEP THIS MANUAL IN A SAFE
PLACE FOR FUTURE REFERENCE.
Be sure to tighten the cross bar screws now that you have installed to the stationary side. Recheck all screws
and bolts to be sure they are fastened securely.
Before placing your mattress in the crib, you can make your own mattress protector by cutting the cardboard
packing insert to 27” x 51”. Place it on the spring frame under the mattress to extend the life of the mattress.
CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES
BY 51-5/8 INCHES WITH A THICKNESS NOT EXCEEDING 6 INCHES.
Please refer to the label (sample below) on the inside face
of the headboard. Record the model/ item number and serial
number of your crib, the name of the store where you made
the purchase, the date of purchase and the wood finish in
the box to the lower right.
WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR ALL
WARRANTY AND REPLACEMENT PART REQUESTS. PLEASE
REFER TO THE LAST PAGE OF THIS INSTRUCTION SHEET FOR
WARRANTY INFORMATION. KEEP THIS MANUAL FOR FUTURE
REFERENCE.
.
SAMPLE LABEL
Please read the Caution and Warning
Statements insert before using your crib.
page 12
For cribs equipped with teething rails, replace teething •
WARNING:
Failure to follow these warnings and
the assembly instructions could result
in serious injury or death.
READ ALL INSTRUCTIONS BEFORE ASSEMBLING
CRIB. KEEP THE MANUAL FOR FUTURE USE.
WARNING:
Do not use this crib if the enclosed or attached
instructions cannot be strictly adhered to. Do not
use this crib if the child is able to climb out unaided
or is taller than 90 cm. Do not place cords, straps,
or similar items that could become wound around
the child’s neck in or near this crib. The mattress
used with this crib should be no more than 15 cm
(6 in) thick and should be of such length and width
that the gap between the mattress and the sides of
the crib is no more than 3 cm (1.2 in) when the
mattress is pushed into the corner of the crib.
Parents should ensure a safe environment for the
child by checking regularly, before placing the
child in the product, that every component is
properly and securely in place.
Infants can suffocate on soft bedding. Never add a pillow or comforter. Never
•
place additional padding under an infant.
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed •
on their backs to sleep, unless otherwise advised by your physician.
Strings can cause strangulation! Do not place items with a string around a •
child’s neck, such as hood strings or pacifier cords. Do not suspend strings over
a crib or attach strings to toys.
To help prevent strangulation tighten all fasteners. A child can trap parts of the •
body or clothing on loose fasteners.
DO NOT place a crib near a window where cords from blinds or drapes may •
strangle a child.
When a child is able to pull to a standing position, set the mattress to the lowest •
position and remove bumper pads, large toys and other objects that could serve
as steps for climbing out.
When a child is able to climb out, reaches the height of 35 inches (90cm), the •
child should be placed in a youth or regular bed, and the crib shall no longer be
used.
Check this product for damaged hardware, loose joints, missing parts or sharp •
edges before and after assembly and frequently during use. DO NOT use crib
if any parts are missing, damaged or broken. Contact DaVinci for replacement
parts and instructional literature if needed. DO NOT substitute parts.
DO NOT use a water mattress with this crib.•
rail if damaged, cracked or loose.
If refinishing, use a non-toxic finish specified for •
children’s products.
Never use plastic shipping bags or other plastic films as
•
mattress covers because they can cause suffocation.
Infants can suffocate in gaps between crib sides when •
used with a mattress that is too small.
Check fasteners periodically for tightness. DO NOT •
overtighten. This may cause distortion or breakage.
Use a crib as a crib, not as a play pen. Remember that a •
crib is not a substitute for a parent’s supervision.
When re-assembling the crib for your second child,
•
please keepin mind that the
filled in order for the screws to grip the wood, t alk to your
local hardware store or lumber yard about how to do this
properly.
• Follow warnings on all products in a crib.
Please do NOT remove any wood screws
in the normal disassembly of the crib.
Storage:
Pine woods exchange moisture with the
•
air adjusting to major changes in room
temperature and humidity Therefore it is
best to place your furniture away from
heating or air-conditioning vents.
•
Sunlight is not friendly to solid wood
furniture and prolonged direct exposure to
harsh sunlight can discolor the finish. Be
careful not to place your furniture in direct
sunlight for extended periods of time.
As with all your fine furniture, blot up spills
•
immediately.
Care and Cleaning:
Do not scratch or chip the finish. Do not use
abrasive chemicals for cleaning. Clean with
mild soap on a soft rag. Rinse and dry
thoroughly. If you ever refinish this furniture,
be sure to use only a non-toxic finish
specified for children’s products. If you
choose to refinish this furniture, the warranty
will be voided.
screw holes will need to be
WARNING:
WARNING!
FALL HAZARD
TO PREVENT DEATH OR SERIOUS
INJURY, ALWAYS KEEP CHILD WITHIN
ARM’S REACH.
READ ALL INSTRUCTIONS BEFORE ASSEMBLING THIS
PRODUCT. KEEP THE MANUAL FOR FUTURE USE.
ONE YEAR LIMITED WARRANTY:
We will replace any missing parts at the
time of purchase or any defective item
within a one year period from the date of
original purchase. Please keep your receipt
so that we may process your warranty
request. This warranty only covers new
units with original packaging and ownership, and is not transferable. It does not
cover any used, secondhand or demo
models.
WARNING:
Read all instructions before use of the changing table.•
Do not use changing table if it is damaged or broken.•
This product is not intended to be used as a changing•
table without adult supervision. Use of the product
without this may result in death or serious injury to your
child from falling. Follow all instructions on attaching
and using the changing table.
Only use the pad provided by DaVinci. •
The maximum weight of the child for which the chang-•
ing table is intended is 30 lbs.
Stop using this changing table when the child is able to•
sit up or roll over.
As with all infant and baby furniture, it is important to•
check fasteners, screws, and bolts periodically for tight-
ness. Parents should ensure a safe environment for
thier child by checking the furtniture regularly before
placing the child in the product.
This warranty does not cover any damaged
or defective parts that result from installation and assembly, normal wear and tear,
abuse, negligence, improper use or altera-
tion to the finish, design, and hardware of
the crib. The specific legal rights of this
warranty may vary from state to state.
Some states do not allow any exclusion or
limitation of incidental damages. Some
States do not allow limitation on how long
an implied warranty lasts.
Registering your product is even easier than
before. You can register your product on our
website at : www.davincidecor.com
IF YOU WOULD LIKE TO ORDER
REPLACEMENT OR MISSING PARTS
PLEASE VISIT US AT:
WWW.DAVINCIDECOR.COM
WARNING!
FALL HAZARD
To prevent death or serious injury, always
keep child within arm’s reach.
OR YOU CAN CONTACT US BY MAIL:
DAVINCI
855 WASHINGTON BLVD.
MONTEBELLO, CA 90640
page 14
Toddler bed Conversion - Assembly Instructions
* All of the parts and hardware you will need is
supplied with the crib at the time of purchase.
STEP 1.
Unscrew the Allen head bolts and
remove the front panel assembly.
STEP 3.
Attach the guardrail (L) to the front posts using
four Allen head bolts (H22) and lock washer
(H23). The guardrail (L) can be installed with
the high end facing either to the left or the
right.
Check to make sure that all of the bolts are
fastened securely.
DO NOT OVERTIGHTEN.
STEP 2.
Move the spring frame to the lowest level.
H23
H22
L. Guardrail
H22
H23
H23
H22
L
The mattress intended for use on the bed is to have minimum dimensions of :
51 5/8 x 27 1/4 x 4 inches thick.
WARNING:
The minimum age to use toddler bed conversion rail shall not be less than 15 months and the
maximum weight shall not be greater than 50 lbs.
Failure to follow these warnings and the assembly instructions could result in serious injury or
death from entrapment or strangulation. Do not place the bed near windows where cords from
blinds or drapes may strangle a child.
If guardrails are used as the mattress containment means, the guardrails provided must be used
to avoid the formation of a gap between the mattress and the bed that could cause an entrapment.
page 15
Full size bed Conversion - Assembly Instructions
* For all 4 in 1 cribs, please contact a retailer to order your full size adult
wooden bed rails for your full size bed conversion.
Barrel Nut X 8 3” Phillips Head Bolt X 8
STEP 1.
Unscrew the Allen head bolts and remove
the left side panel (D).
STEP 2.
Separate the dresser from the crib. Replace
the posts in the center panel with front and
back posts (G-3 & F-3) as illustrated.
STEP 3.
Insert barrel nuts into bed rails. Use 3” Phillips
head bolts (A) to attach the rails. Tighten bolts
securely with a Phillips screwdriver.
Be sure to keep the extra bolts and barrel nuts
for future use.
H9
H4
H1
H3
H9
H2 H3
F-3
DO NOT OVERTIGHTEN.
Bed Rails
G-3
Bed Rails
page 16
Loading...