How it Works
DaVinci
Loading...
CBHA1339
Specifications
8 pgs893.97 Kb0

DaVinci CBHA1339 Specifications

Download
Test Report
Report No.
A2210266513102R1
Page 1 of 8
Company Name shown on Report
MILLION DOLLAR BABY/ DAVINCI/ BABYLETTO/ NURSERYWORKS/ DAVINCIKIDS/ BABYMOD/ BILLY/ FRANKLIN & BEN/ MILLION DOLLAR BABY CLASSIC/ CAPSULE/ UBABUB/ BEAST OF LEISURE
Address
8700 REX RD.PICO RIVERA, CA 9 0660,USA
Sample Name
Base For
Item No.
22487
Buyer
Million Dollar Baby/ DaVinci/ Babyletto/ Nurseryworks/ DavinciKids/ Babymod/ Billy/ Franklin & Ben/ Million Dollar Baby Classic/ CAPSULE/Beast of leisure
Exported to
U.S.A
Quantity Of Sample
1
Sample Received Date
Jul. 7, 2021
Testing Period
Jul. 7, 2021 to Jul. 16, 2021
Test Conducted:
As requested by the client. For details refer to next page(s)
Approved by
Hill Zheng
Technical Manager
Date
Jul. 19, 2021
No. T166325082
Centre Testing International Group Co.,Ltd.
CTI Building, Xing Dong Community, Xin’an Sub-district, Bao’an District, Shenzhen City, Guangdong Province, P.R. China
The following sample(s) and sample information was/were submitted and identified by/on the behalf of the client
Report No.
A2210266513102R1
Page 2 of 8
TEST REQUEST
CONCLUSION
1)
ASTM F963-17 Standard Consumer Safety Specification for Toy Safety
-
Clause 4.3.5 – Total Lead content in paint and similar surface coating materials
PASS
-
Clause 4.3.5 – Total Lead content in substrate materials
PASS
-
Clause 4.3.5 Heavy elements – Migration of certain elements
PASS
2)
US Consumer Product Safety Improvement Act of 2008 (CPSIA) with amendment (H.R.2715)
-
Lead in surface-coatings and similar materials of children's products
PASS
-
Lead in substrate materials of children's products
PASS
-
Phthalates in children's toys and childcare articles
PASS
For chemical test, the tested component(s) is/are identified by the client.
Report No.
A2210266513102R1
Page 3 of 8
Method(s) ASTM F963-17 Clause 8.3 was/were used, and the item(s) was/were analyzed by ICP-OES.
Tested Item(s)
Result (mg/kg)
MDL
(mg/kg)
Limit
(mg/kg)
001+002
Total Lead (Pb)
N.D.
5
90
Remark:
-
MDL = Method Detection Limit
-
N.D. = Not Detected (<MDL)
-
mg/kg = ppm = parts per million
-
The limit for composite test should be divided by the mixed number.
Method(s) ASTM F963-17 Clause 8.3 was/were used, and the item(s) was/were analyzed by ICP-OES.
Tested Item(s)
Result (mg/kg)
MDL
(mg/kg)
Limit
(mg/kg)
003
Total Lead (Pb)
14
5
100
Tested Item(s)
Result (mg/kg)
MDL
(mg/kg)
Limit
(mg/kg)
004
005
Total Lead (Pb)
N.D.
N.D.
5
100
Remark:
-
MDL = Method Detection Limit
-
N.D. = Not Detected (<MDL)
-
mg/kg = ppm = parts per million
Report No.
A2210266513102R1
Page 4 of 8
Method(s) ASTM F963-17 Clause 8.3 was/were used, and the item(s) was/were determined by ICP-OES.
Tested Item(s)
Result (mg/kg)
MDL
(mg/kg)
Limit
(mg/kg)
001
002
003
Soluble Antimony (Sb)
N.D.
N.D.
N.D.
5
60
Soluble Arsenic (As)
N.D.
N.D.
N.D.
2.5
25
Soluble Barium (Ba)
243
239
N.D.
5
1000
Soluble Cadmium (Cd)
N.D.
N.D.
N.D.
5
75
Soluble Chromium (Cr)
11
13
N.D.
2.5
60
Soluble Lead (Pb)
N.D.
N.D.
N.D.
5
90
Soluble Mercury (Hg)
N.D.
N.D.
N.D.
2.5
60
Soluble Selenium (Se)
N.D.
N.D.
N.D.
5
500
Remark:
-
MDL = Method Detection Limit
-
N.D. = Not Detected (<MDL)
-
mg/kg = ppm = parts per million
-
Result(s) shown are of adjusted analytical results by subtracting analytical correction factor.
-
Filter paper was used instead of 0.45μm membrane filter in lab testing.
-
Where the test portion has a mass of between 10mg and 100mg the quantity of the appropriate elements shall be calculated as if 100mg of the test portion had been used. (tested sample: 001 sample weight:
96.4mg)
Method(s) CPSC-CH-E1003-09.1 was/were used, and the item(s) was/were analyzed by ICP-OES.
Tested Item(s)
Result (mg/kg)
MDL
(mg/kg)
Limit
(mg/kg)
001+002
Total Lead (Pb)
N.D.
5
90
Report No.
A2210266513102R1
Page 5 of 8
Remark:
-
MDL = Method Detection Limit
-
N.D. = Not Detected (<MDL)
-
mg/kg = ppm = parts per million
-
The limit for composite test should be divided by the mixed number.
Method(s) CPSC-CH-E1001-08.3/CPSC-CH-E1002-08.3 was/were used, and the item(s) was/were analyzed by ICP-OES.
Tested Item(s)
Result (mg/kg)
MDL
(mg/kg)
Limit
(mg/kg)
003
Total Lead (Pb)
14
5
100
Tested Item(s)
Result (mg/kg)
MDL
(mg/kg)
Limit
(mg/kg)
004
005
Total Lead (Pb)
N.D.
N.D.
5
100
Remark:
-
MDL = Method Detection Limit
-
N.D. = Not Detected (<MDL)
-
mg/kg = ppm = parts per million
Report No.
A2210266513102R1
Page 6 of 8
Method(s) CPSC-CH-C1001-09.4 was/were used, and the item(s) was/were analyzed by GC-MS.
Tested Item(s)
Result (mg/kg)
MDL
(mg/kg)
Limit
(mg/kg)
001+002
003
Di-2-ethylhexyl Phthalate (DEHP)
N.D.
N.D.
30
1000
Dibutyl Phthalate (DBP)
N.D.
N.D.
30
1000
Benzylbutyl Phthalate (BBP)
N.D.
N.D.
30
1000
Diisononyl Phthalate (DINP)
N.D.
N.D.
50
1000
Di-n-Pentyl Phthalate (DPP/DPENP)
N.D.
N.D.
30
1000
Dicyclohexyl Phthalate (DCHP)
N.D.
N.D.
30
1000
Di-isobutyl Phthalate (DIBP)
N.D.
N.D.
30
1000
Di-n-hexyl Phthalate (DnHP/DHEXP)
N.D.
N.D.
30
1000
Client's additional requirement on other phthalate(s)
Di-n-octyl Phthalate (DNOP)
N.D.
N.D.
30
--
Diisodecyl Phthalate (DIDP)
N.D.
N.D.
50
--
Remark:
-
MDL = Method Detection Limit
-
N.D. = Not Detected (<MDL)
-
mg/kg = ppm = parts per million
-
1000 mg/kg = 0.1%
-
The limit for composite test should be divided by the mixed number.
-
Method CPSC-CH-C1001-09.4 was accredited by CNAS on eight phthalates (DEHP, DBP, BBP, DINP, DPP/DPENP, DCHP, DIBP, DnHP/DHEXP) test in this report.
Report No.
A2210266513102R1
Page 7 of 8
001
Dull black coating
002
Bright black coating with grey undercoating
003
Black plastic(round feet pad)
004
Silver metal(main metal with black coating)
005
Silver soldering tin(joint of metal with black coating)
Note:
- This testing report revised “Item No.” based on the original report of No. A2210266513102. This testing report displaces the original one which was invalid since the date of this testing report released.
Tested Sample/Part Description
Report No.
A2210266513102R1
Page 8 of 8
Photo(s) of the sample(s)
Statement:
1. This report is considered invalid without approved signature, special seal and the seal on the perforation;
2. Company Name and Address shown on Report, the sample(s) and sample information was/were provided by
the client who should be responsible for the authenticity which CTI hasn’t verified;
3. The result(s) shown in this report refer(s) only to the sample(s) tested;
4. Without written approval of CTI, this report can’t be reproduced except in full.
*** End of Report ***
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use