DaVinci CBHA1337 Specifications

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format d

ocuments, subject to Terms and Conditions for Electronic

Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The

Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This

document cannot

be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful

and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested.

SGS Taiwan Ltd. No.127, Wu Kung Road, New Taipei Industrial Park, New Taipei City, Taiwan /新北市新北產業園區五工路127 號

台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2299-2920 www.tw.sgs.com

Member of SGS Group

TEST REPORT

Hardline Laboratory Report No.： HJ20022A/2021

Page： 1 of 12

Date： Apr. 16, 2021

Million Dollar Baby/ DaVinci/ Babyletto/ Nurseryworks/ DavinciKids/ Babymod/ Billy/ Franklin & Ben/ Million Dollar Baby Classic/ Beast Of Leisure

8700 Rex Rd. Pico Rivera, CA90660, USA

The following merchandise was submitted and identified by the applicant as:

Product Description:

Jenny Lind 3-in-1 Convertible Mini Crib/Jenny Lind Mini toddler bed conversion kit

Style / Item No. :

7398 / 7399

Buyer/Order No. :

Million Dollar Baby

We have tested the submitted sample(s) as requested and the following results were obtained:

Test Requested: Please refer to the test summary

Test Results： --- See following sheets ---

Date of Receipt: Feb. 03, 2021 & Feb. 20, 2021 & Mar. 02, 2021 & Mar. 03, 2021 & Mar. 15, 2021

& Mar. 26, 2021 & Apr. 08, 2021

Testing Period: Mar. 03, 2021 ~ Mar. 18, 2021 & Mar. 26, 2021 ~ Apr. 15, 2021

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format d

ocuments, subject to Terms and Conditions for Electronic

Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The

Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This

document cannot

be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful

and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested.

SGS Taiwan Ltd. No.127, Wu Kung Road, New Taipei Industrial Park, New Taipei City, Taiwan /新北市新北產業園區五工路127 號

台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2299-2920 www.tw.sgs.com

Member of SGS Group

TEST REPORT

Hardline Laboratory Report No.： HJ20022A/2021

Page： 2 of 12

Test Summary:

As specified by client, selected parts of the submitted sample(s) for compliance with

Item

Test Parameter

Conclusion

Submitted Sample (With caster mode)

1

SOR/2016-152 Crib, Cradles and Bassinets Regulations

Pass

(See results 1)

2

Sharp points, sharp edges and small parts with reference to Section 7 small parts, section 8 metal edges, section 10 plastic edges & section 11 Wooden of Toys Regulations SOR/2011-17 amended up to January 11, 2019 of Canada Consumer Product Safety Act

Pass

(See results 2)

3

SOR/2016-194 Textile Flammability

Pass

(See results 3)

4

Section 32 Dolls, Plush Toys and Soft Toys: Flammability of outer covering of Toys Regulations SOR/2011-17 amended up to January 11, 2019 of

Canada Consumer Product Safety Act

Pass

(See results 4)

5

Section 23 Specific substances in surface coatings of Toys Regulations SOR/2011-17 amended up to January 11, 2019 of Canada Consumer Product Safety Act

Pass

(See results 6)

6

SOR/2016-193 Lead/ Mercury in surface coatings

Pass

(See results 7)

7

SOR/2018-83 Consumer products containing lead Regulations

Pass

(See results 8)

8

SOR/2016-188 Phthalates Regulations

Pass

(See results 9)

Submitted Sample (Without caster mode)

9

SOR/2016-152 Crib, Cradles and Bassinets Regulations

Pass

(See results 10)

10

Sharp points, sharp edges and small parts with reference to Section 7 small parts, section 8 metal edges, section 10 plastic edges & section 11 Wooden of Toys Regulations SOR/2011-17 amended up to January 11, 2019 of Canada Consumer Product Safety Act

Pass

(See results 11)

**Remark: The chemical results of No.8 were transferred from report HJC0040/2020 issued on Feb. 02, 2021 & No.10 were transferred from report HJ10002A/2021 issued on Mar. 10, 2021.

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format d

ocuments, subject to Terms and Conditions for Electronic

Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The

Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This

document cannot

be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful

and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested.

SGS Taiwan Ltd. No.127, Wu Kung Road, New Taipei Industrial Park, New Taipei City, Taiwan /新北市新北產業園區五工路127 號

台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2299-2920 www.tw.sgs.com

Member of SGS Group

TEST REPORT

Hardline Laboratory Report No.： HJ20022A/2021

Page： 3 of 12

Test Results:

Submitted Sample (With caster mode)

1. SOR/2016-152 Crib, Cradles and Bassinets Regulations

Section Description

Results

Requirements for Cribs, Cradles, Bassinets, Accessories and Stands

2

Key structural components — assembly

Pass

3

Surface coating materials *Note: The details are shown in Results 5.

Pass

4

Angle

Pass

5

Angle — products that rock or swing

N/A

6

Shearing and pinching

Pass

7

Types of sides

Pass

8

Strength and integrity of slats

Pass

9

Posts

Pass

10

Entrapment

10(1)

Entrapment — cribs

Pass

10(2)

Entrapment — other products

N/A

11

Openings formed or exposed — structural covers

11(1)

Openings formed or exposed — structural covers — cribs

N/A

11(2)

Openings formed or exposed — structural covers — other products

N/A

12

Mesh

12(1)

Mesh — strength and integrity

N/A

12(2)

Size of openings in mesh

N/A

13

Flammability

Pass

14

Entanglement

14(1)

Entanglement — cribs and stands

Pass

14(2)

Entanglement — other products

N/A

15

Parts

15(1)

Parts — wood, plastic or similar hard material

Pass

15(2)

Parts — Metal

Pass

15(3)

Metal tubing

N/A

15(4)

Bolts

Pass

16

Small parts

Pass

17

Openings

Pass

18

Restraint systems

Pass

19

Cords and straps — length

19(1)

Cords and straps — length — general

N/A

19(2)

Cords and straps — length —change table accessory

N/A

20

Cords and straps — loops

20(1)

Cords and straps — loops — general

N/A

20(2)

Cords and straps — loops — change table accessories

N/A

21

Coil springs

N/A

22

Mattress

Pass

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format d

ocuments, subject to Terms and Conditions for Electronic

Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The

Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This

document cannot

be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful

and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested.

SGS Taiwan Ltd. No.127, Wu Kung Road, New Taipei Industrial Park, New Taipei City, Taiwan /新北市新北產業園區五工路127 號

台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2299-2920 www.tw.sgs.com

Member of SGS Group

TEST REPORT

Hardline Laboratory Report No.： HJ20022A/2021

Page： 4 of 12

Additional Requirements for Cribs

23

Structural integrity

Pass

24

Mattress support

Pass

25

Height of sides — mattress support in lowest position

Pass

26

Height of sides — mattress support in highest position

Pass

27

Latching or locking mechanisms of access sides

N/A

28

Latching or locking mechanisms of folding cribs

N/A

29

Slat strength

Pass

30

Toeholds

Pass

Additional Requirements for Accessories

42

Entrapment

42(1)

Entrapment — accessory placed on or fixed to crib

N/A

42(2)

Entrapment — accessory detached or displaced from crib

N/A

43

Structural integrity

N/A

44

Height of sides — sleep accessory

N/A

Presentation of Information

47

Presentation — general

Pass

48

Print

Pass

49

Height of type

49(1)

Signal words

Pass

49(2)

Other information — height of type

Pass

Requirements for Cribs, Cradles, Bassinets, Accessories and Stands

50

Required information

Pass

51

Assembly and use

51(1)

Assembly and use — cribs, cradles and bassinets

Pass

51(2)

Assembly and use — accessories

N/A

51(3)

Exception — accessories supplied with product

N/A

52

Warnings — pouches

Pass

Additional Requirements for Cribs

53

Warning — all cribs

Pass

54

Warning — cribs with access side

N/A

55

Warning — cribs sold without mattress

N/A

56

Warning — cribs with mattress

Pass

57

Warning — cribs designed to be used without mattress

N/A

58

Warning — when crib used as accessory

N/A

Additional Requirements for Accessories

General

71

Non-application

72

Warning

N/A

72(1)

Warning — all accessories

72(2)

Warning — accessories that extend over or into occupant retention area

73

Warning — accessories other than sleep accessories

N/A

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format d

ocuments, subject to Terms and Conditions for Electronic

Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The

Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This

document cannot

be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful

and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested.

SGS Taiwan Ltd. No.127, Wu Kung Road, New Taipei Industrial Park, New Taipei City, Taiwan /新北市新北產業園區五工路127 號

台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2299-2920 www.tw.sgs.com

Member of SGS Group

TEST REPORT

Hardline Laboratory Report No.： HJ20022A/2021

Page： 5 of 12

Sleep Accessories

74

Warning — sleep accessories

N/A

75

Warning — sleep accessories sold without mattress

N/A

76

Warning — sleep accessories with mattress

N/A

77

Warning — sleep accessories designed to be used without mattress

N/A

N/A = Not Applicable Conclusion: The submitted sample(s) complies with the requirement of SOR/2016-152 Cribs, Cradles and

Bassinets Regulations.

2. Sharp points, sharp edges and small parts with reference to Toys Regulations SOR/2011-17 amended up to January 11, 2019 of Canada Consumer Product Safety Act

Section

Description

Results

7

Small parts

Pass

8

Metal edges

Pass

10

Plastic edges

Pass

11

Wooden

Pass

3. SOR/2016-194 Textile Flammability

Flame Resistance - 45°Angle Test - One Second Flame Impingement

(CAN/CGSB-4.2 No.27.5 - 2008)

Sample

:

White plastic sheet (mattress)

Fabric Surface

:

Plain

Test Specimen Direction

:

Length

Original State

Time of flame spread (s)

Flame Spread (sec.)

Burn Code

(1) - DNI

(2) - DNI

(3) - DNI

(4) - DNI

(5) - DNI

(6) - DNI*

(7) - DNI*

(8) - DNI*

(9) - DNI*

(10) - DNI*

Note: DNI = Do Not Ignite * = Since the initial five specimens did not ignite, five additional specimens were tested.

Requirement:

Canada Consumer Product Safety Act: Textile Flammability Regulation SOR/2016-194

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format d

ocuments, subject to Terms and Conditions for Electronic

Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The

Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This

document cannot

be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful

and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested.

SGS Taiwan Ltd. No.127, Wu Kung Road, New Taipei Industrial Park, New Taipei City, Taiwan /新北市新北產業園區五工路127 號

台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2299-2920 www.tw.sgs.com

Member of SGS Group

TEST REPORT

Hardline Laboratory Report No.： HJ20022A/2021

Page： 6 of 12

Banned in Canada if flame spread is:

Plain Surface Fabrics: 3.5 Seconds or less

Conclusion

The submitted sample complies with the flammability requirements for General Textiles Products under Textile Flammability Regulation SOR/2016-194 of the Canada Consumer Product Safety Act

4. Section 32 Dolls, Plush Toys and Soft Toys: Flammability of outer covering of Toys Regulations SOR/2011-17 amended up to January 11, 2019 of Canada Consumer Product Safety Act

Section

Description

Result

32

Dolls, Plush Toys and Soft Toys- Flammability of outer covering

Pass

5. SOR/2016-152 Crib, Cradles and Bassinets Regulations: section 3 Surface coating materials

1) Lead and Mercury in surface coating material

Method: With reference to Health Canada Product Safety Reference Manual Book 5 – Laboratory Policies and Procedures Part B: Test Method Section C-02.2.2(2020). Analysis was performed by ICP-OES.

Test Method Section C-07(2019). Analysis was performed by Mercury Analyzer.

Test Item(s)

Unit

Result

RL

Permissible

Limit 1 4

Average of 3 units-Lead (Pb)

mg/kg

N.D.

20

90

Mercury (Hg)

mg/kg

N.D.

1

Not detected

2) Soluble heavy metals in surface coating material

Method: With reference to Health Canada Product Safety Reference Manual Book 5 – Laboratory Policies and Procedures Part B: Test Method Section C-03(2018). Analysis was performed by ICP-OES.

Test Item(s)

Unit

Result

RL

Permissible

Limit

1

4

Average of 3 units-Soluble Antimony

(Sb)

mg/kg

N.D.

50

1000

Average of 3 units-Soluble Arsenic

(As)

mg/kg

N.D.

50

1000

Average of 3 units-Soluble Cadmium

(Cd)

mg/kg

N.D.

50

1000

Average of 3 units-Soluble Selenium

(Se)

mg/kg

N.D.

50

1000

Average of 3 units-Soluble Barium

(Ba)

mg/kg

N.D.

50

1000

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format d

ocuments, subject to Terms and Conditions for Electronic

Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The

Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This

document cannot

be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful

and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested.

SGS Taiwan Ltd. No.127, Wu Kung Road, New Taipei Industrial Park, New Taipei City, Taiwan /新北市新北產業園區五工路127 號

台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2299-2920 www.tw.sgs.com

Member of SGS Group

TEST REPORT

Hardline Laboratory Report No.： HJ20022A/2021

Page： 7 of 12

6. Section 23 Specific substances in surface coatings of Toys Regulations SOR/2011-17 amended up to January 11, 2019 of Canada Consumer Product Safety Act

1) Lead and Mercury in surface coating material

Method: With reference to Health Canada Product Safety Reference Manual Book 5 – Laboratory Policies and Procedures Part B: Test Method Section C-02.2.2(2020). Analysis was performed by ICP-OES.

Test Method Section C-07(2019). Analysis was performed by Mercury Analyzer.

Test Item(s)

Unit

Result

RL

Permissible

Limit 1 4

Average of 3 units-Lead (Pb)

mg/kg

N.D.

20

90

Mercury (Hg)

mg/kg

N.D.

1

10

2) Soluble heavy metals in surface coating material

Method: With reference to Health Canada Product Safety Reference Manual Book 5 – Laboratory Policies and Procedures Part B: Test Method Section C-03(2018). Analysis was performed by ICP-OES.

Test Item(s)

Unit

Result

RL

Permissible

Limit

1

4

Average of 3 units-Soluble Antimony

(Sb)

mg/kg

N.D.

50

1000

Average of 3 units-Soluble Arsenic

(As)

mg/kg

N.D.

50

1000

Average of 3 units-Soluble Cadmium

(Cd)

mg/kg

N.D.

50

1000

Average of 3 units-Soluble Selenium

(Se)

mg/kg

N.D.

50

1000

Average of 3 units-Soluble Barium

(Ba)

mg/kg

N.D.

50

1000

7. SOR/2016-193 Lead/ Mercury in surface coatings

Method: With reference to Health Canada Product Safety Reference Manual Book 5 – Laboratory Policies and Procedures Part B: Test Method Section C-02.2.2(2020). Analysis was performed by ICP-OES.

Test Method Section C-07(2019). Analysis was performed by Mercury Analyzer.

Test Item(s)

Unit

Result

RL

Permissible

Limit 1 4

Average of 3 units-Lead (Pb)

mg/kg

N.D.

20

90

Mercury (Hg)

mg/kg

N.D.

1

10

8. SOR/2018-83 Consumer products containing lead Regulations

Method : With reference to Health Canada Product Safety Reference Manual Book 5 – Laboratory

Policies and Procedures Part B: Test Method Section C-02.3(2017) & C-02.4.1(2019). Analysis was performed by ICP-OES.

Test Item(s)

Unit

Result

RL

Permissible

Limit

2~3

5~12

13

14

15~17

Average of 3 units-Lead (Pb)

mg/kg

N.D.

34.4

N.D.

20

90

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format d

ocuments, subject to Terms and Conditions for Electronic

Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The

Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This

document cannot

be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful

and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested.

SGS Taiwan Ltd. No.127, Wu Kung Road, New Taipei Industrial Park, New Taipei City, Taiwan /新北市新北產業園區五工路127 號

台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2299-2920 www.tw.sgs.com

Member of SGS Group

TEST REPORT

Hardline Laboratory Report No.： HJ20022A/2021

Page： 8 of 12

9. SOR/2016-188 Phthalates Regulations

Method :With reference to Health Canada Product Safety Reference Manual Book 5 – Laboratory

Policies and Procedures Part B: Test Method Section C-34.2(2018).

Analysis was performed by GC-MS.

Test Item(s)

Unit

Result (%)

RL

Permissible

Limit

1 4 12

13

15

Dibutyl Phthalate (DBP)

%

N.D.

0.003

0.1

Benzylbutyl Phthalate (BBP)

%

N.D.

0.003

0.1

Bis-(2-ethylhexyl) Phthalate (DEHP)

%

N.D.

0.00640

N.D.

0.003

0.1

Diisononyl Phthalate (DINP)

%

N.D.

0.01

0.1

Di-n-octyl Phthalate (DNOP)

%

N.D.

0.003

0.1

Diisodecyl Phthalate (DIDP)

%

N.D.

0.01

0.1

Sample Description:

1.

White coating of sample. (cover of frame)

2.

Brown wood of sample. (frame's substrate)

3.

White paper sticker with black printing of sample. (warning label)

4.

Black coating of sample. (cover of mattress support)

5.

Silver colored metal of sample. (mattress support's substrate)

6.

Silver colored metal of sample. (plate's substrate)

7.

Silver colored metal of sample. (sheet’s substrate)

8.

Silver colored metal of sample. (nut)

9.

Silver colored metal of sample. (2-3/4" allen head bolt)

10.

Silver colored metal of sample. (washer)

11.

Silver colored metal of sample. (metal cap)

12.

Black plastic of sample. (caster)

13.

Silver colored plastic of sample. (caster gear)

14.

Silver colored metal of sample. (on frame)

15.

White plastic sheet of sample. (mattress)

16.

Black coating with white polyester of sample. (label of mattress)

17.

White paper sticker of sample. (on board)

Note :

1. mg/kg = ppm; 0.1wt% = 1000 ppm

2. n.d. = not detected

3. RL = Reporting Limit

4. Results presented in this table are the calculated results based on the above tested components.

5. The chemical analysis test was conducted in SGS Taiwan Ltd. Chemical lab – Taipei.

6. The content of this report is invalid if it is not presented as the entire report.

7. The statement of conformity is based on the test results, but does not include the measurement uncertainty.

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format d

ocuments, subject to Terms and Conditions for Electronic

Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The

Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This

document cannot

be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful

and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested.

SGS Taiwan Ltd. No.127, Wu Kung Road, New Taipei Industrial Park, New Taipei City, Taiwan /新北市新北產業園區五工路127 號

台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2299-2920 www.tw.sgs.com

Member of SGS Group

TEST REPORT

Hardline Laboratory Report No.： HJ20022A/2021

Page： 9 of 12

Submitted Sample (Without caster mode)

10. SOR/2016-152 Crib, Cradles and Bassinets Regulations

Section Description

Results

Requirements for Cribs, Cradles, Bassinets, Accessories and Stands

2

Key structural components — assembly

Pass

3

Surface coating materials *Note: The details are shown in Results 5.

Pass

4

Angle

Pass

5

Angle — products that rock or swing

N/A

6

Shearing and pinching

Pass

7

Types of sides

Pass

8

Strength and integrity of slats

Pass

9

Posts

Pass

10

Entrapment

10(1)

Entrapment — cribs

Pass

10(2)

Entrapment — other products

N/A

11

Openings formed or exposed — structural covers

11(1)

Openings formed or exposed — structural covers — cribs

N/A

11(2)

Openings formed or exposed — structural covers — other products

N/A

12

Mesh

12(1)

Mesh — strength and integrity

N/A

12(2)

Size of openings in mesh

N/A

13

Flammability

Pass

14

Entanglement

14(1)

Entanglement — cribs and stands

Pass

14(2)

Entanglement — other products

N/A

15

Parts

15(1)

Parts — wood, plastic or similar hard material

Pass

15(2)

Parts — Metal

Pass

15(3)

Metal tubing

N/A

15(4)

Bolts

Pass

16

Small parts

Pass

17

Openings

Pass

18

Restraint systems

Pass

19

Cords and straps — length

19(1)

Cords and straps — length — general

N/A

19(2)

Cords and straps — length —change table accessory

N/A

20

Cords and straps — loops

20(1)

Cords and straps — loops — general

N/A

20(2)

Cords and straps — loops — change table accessories

N/A

21

Coil springs

N/A

22

Mattress

Pass

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format d

ocuments, subject to Terms and Conditions for Electronic

Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The

Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This

document cannot

be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful

and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested.

SGS Taiwan Ltd. No.127, Wu Kung Road, New Taipei Industrial Park, New Taipei City, Taiwan /新北市新北產業園區五工路127 號

台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2299-2920 www.tw.sgs.com

Member of SGS Group

TEST REPORT

Hardline Laboratory Report No.： HJ20022A/2021

Page： 10 of 12

Additional Requirements for Cribs

23

Structural integrity

Pass

24

Mattress support

Pass

25

Height of sides — mattress support in lowest position

Pass

26

Height of sides — mattress support in highest position

Pass

27

Latching or locking mechanisms of access sides

N/A

28

Latching or locking mechanisms of folding cribs

N/A

29

Slat strength

Pass

30

Toeholds

Pass

Additional Requirements for Accessories

42

Entrapment

42(1)

Entrapment — accessory placed on or fixed to crib

N/A

42(2)

Entrapment — accessory detached or displaced from crib

N/A

43

Structural integrity

N/A

44

Height of sides — sleep accessory

N/A

Presentation of Information

47

Presentation — general

Pass

48

Print

Pass

49

Height of type

49(1)

Signal words

Pass

49(2)

Other information — height of type

Pass

Requirements for Cribs, Cradles, Bassinets, Accessories and Stands

50

Required information

Pass

51

Assembly and use

51(1)

Assembly and use — cribs, cradles and bassinets

Pass

51(2)

Assembly and use — accessories

N/A

51(3)

Exception — accessories supplied with product

N/A

52

Warnings — pouches

Pass

Additional Requirements for Cribs

53

Warning — all cribs

Pass

54

Warning — cribs with access side

N/A

55

Warning — cribs sold without mattress

N/A

56

Warning — cribs with mattress

Pass

57

Warning — cribs designed to be used without mattress

N/A

58

Warning — when crib used as accessory

N/A

Additional Requirements for Accessories

General

71

Non-application

72

Warning

N/A

72(1)

Warning — all accessories

72(2)

Warning — accessories that extend over or into occupant retention area

73

Warning — accessories other than sleep accessories

N/A

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format d

ocuments, subject to Terms and Conditions for Electronic

Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The

Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This

document cannot

be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful

and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested.

SGS Taiwan Ltd. No.127, Wu Kung Road, New Taipei Industrial Park, New Taipei City, Taiwan /新北市新北產業園區五工路127 號

台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2299-2920 www.tw.sgs.com

Member of SGS Group

TEST REPORT

Hardline Laboratory Report No.： HJ20022A/2021

Page： 11 of 12

Sleep Accessories

74

Warning — sleep accessories

N/A

75

Warning — sleep accessories sold without mattress

N/A

76

Warning — sleep accessories with mattress

N/A

77

Warning — sleep accessories designed to be used without mattress

N/A

NA = Not Applicable

Conclusion: The submitted sample(s) complies with the requirement of SOR/2016-152 Cribs, Cradles and

Bassinets Regulations.

11. Sharp points, sharp edges and small parts with reference to Toys Regulations SOR/2011-17 amended up to January 11, 2019 of Canada Consumer Product Safety Act

Section

Description

Results

7

Small parts

Pass

8

Metal edges

Pass

10

Plastic edges

Pass

11

Wooden

Pass

– Picture(s) –

Photo A: Appearance of the tested crib

(with caster mode)

Photo B: Serious product

(with caster mode)

Note:

1. The content of this report is invalid if it is not presented as the entire report.

2. The statement of conformity is based on the test results, but does not include the measurement uncertainty.

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format d

ocuments, subject to Terms and Conditions for Electronic

Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The

Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This

document cannot

be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful

and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested.

SGS Taiwan Ltd. No.127, Wu Kung Road, New Taipei Industrial Park, New Taipei City, Taiwan /新北市新北產業園區五工路127 號

台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2299-2920 www.tw.sgs.com

Member of SGS Group

TEST REPORT

Hardline Laboratory Report No.： HJ20022A/2021

Page： 12 of 12

Photo C: Appearance of the tested crib

(without caster mode)

Photo D: Serious product

(without caster mode)

Photo E: Appearance of the sample - mattress

--- End of Report ---