David Clark 40992G-19 User Manual

USER MANUAL

Digital Wireless Belt Station

U9110-BSW

(P/N: 40992G-19)

19549P-83 (03-17)

©2016 DAVID CLARK COMPANY INCORPORATED

Cautions and Warnings

READ AND SAVE THESE INSTRUCTIONS. Follow the instructions in this installation
manual. These instructions must be followed to avoid damage to this product and
associated equipment. Product operation and reliability depends on proper usage.

DO NOT INSTALL ANY DAVID CLARK COMPANY PRODUCT THAT
APPEARS DAMAGED. Upon unpacking your David Clark product,

inspect the contents for shipping damage. If damage is apparent,
immediately file a claim with the carrier and notify your David Clark
product supplier.

ELECTRICAL HAZARD - Disconnect electrical power when making any
internal adjustments or repairs. All repairs should be performed by a
representative or authorized agent of the David Clark Company.

STATIC HAZARD - Static electricity can damage components.
Therefore, be sure to ground yourself before opening or installing
components.

LI-POLYMER - This product is used with Li-Polymer batteries. Do not
incinerate, disassemble, short circuit, or expose the battery to high
temperatures. Battery must be disposed of properly in accordance
with local regulations.

1 of 10

19549P-83 (03-17)

Overview

The U9110-BSW (40992G-19) Digital Wireless Belt Station is a portable wireless communication
device that when used in conjunction with a U9120-W4 (44002G-01) Digital Wireless Gateway
becomes part of a wireless intercom system. Up to four belt stations can be connected to one
gateway.

The U9110-BSW Digital Wireless Belt Station employs an adaptive SMART-VOX system which
does not require adjustment by the user. The system automatically monitors background noise
levels and detects voice.

2 of 10

19549P-83 (03-17)

Figure 1: Overview of Belt Station