DAVI & CIA CS4300C User Manual
CS4300C
USER’S MANUAL
MA27-02/B
12/09/2011
www.davicia.com
USER’S MANUAL
MA27-02/B
2
INDEX
Page
1.
1.1.
1. DESCRIPTION
DESCRIPTIONDESCRIPTION
DESCRIPTION
3
2.
2.2.
2. INSTALLATION
INSTALLATIONINSTALLATION
INSTALLATION
2.1. Location and setting
2.2. Startup
4
4
4
3.
3.3.
3. OPERATION
OPERATIONOPERATION
OPERATION
3.1. LCD symbol description
3.2. Key functions
3.3. Weighing
3.4. Taring
3.5. Hold
3.6. Body Mass Index (BMI)
3.7. Pre-Tare
5
5
6
6
6
7
7
8
4.
4.4.
4. SETUP
SETUPSETUP
SETUP
4.1. Connecting with PC
4.2. Print function
10
10
11
5.
5.5.
5. MAINTENANCE
MAINTENANCEMAINTENANCE
MAINTENANCE AND CLEANING
AND CLEANINGAND CLEANING
AND CLEANING
5.1. Instructions for charge and connect
5.2. Instructions for replacing batteries
5.3. Environmental
5.4. Equipment disposal
12
12
12
12
12
6.
6.6.
6. TROUBLESHOOTING
TROUBLESHOOTINGTROUBLESHOOTING
TROUBLESHOOTING
13
7.
7.7.
7. TECHNICAL SPECIFICATIO
TECHNICAL SPECIFICATIOTECHNICAL SPECIFICATIO
TECHNICAL SPECIFICATIONS
NSNS
NS
14
8.
8.8.
8. WARRANTY CERTIFICATE
WARRANTY CERTIFICATEWARRANTY CERTIFICATE
WARRANTY CERTIFICATE
15
9.
9.9.
9. CE DECLARATION OF CONFORMITY
CE DECLARATION OF CONFORMITYCE DECLARATION OF CONFORMITY
CE DECLARATION OF CONFORMITY
16
USER’S MANUAL
MA27-02/B
3
1. DESCRIPTION
(1) Gripping handles
(2) Folding arm rests
(3) Seating surface
(4) Locking castors
(5) Foot rests
(6) Display unit at rear
1
2
3
4
5
6
USER’S MANUAL
MA27-02/B
4
2. INSTALLATION
Before putting the device into use, please read with care the information given in the Operating Instructions.
They contain important instructions for installation, proper use and maintenance of the device.
The manufacturer shall not be liable for damages arising out of failure to heed the following instructions:
o When using electrical components under increased safety requirements, always comply with the appropriate
regulations.
o Improper installation will render the warranty null and void.
o Ensure the voltage marked on the power supply unit, matches your main power supply.
o This device is designed for use indoors.
o Observe the permissible ambient temperatures for use.
o The device meets the requirements for electromagnetic compatibility. Do not exceed the maximum values
specified in the applicable standards.
2.
2.2.
2.1111. LOCATION AND SETTING
. LOCATION AND SETTING. LOCATION AND SETTING
. LOCATION AND SETTING
We strongly recommend you use this device on flat and hard surface. Any soft surface, like carpet will cause
inaccuracy.
2.
2.2.
2.2222. STARTUP
. STARTUP. STARTUP
. STARTUP
o Connect the equipment to the power supply using the AC adaptor.
o Press the ON/OFF button in the indicator.
o Wait until “0” appears on display.
USER’S MANUAL
MA27-02/B
5
3. OPERATION
Before reading detailed instructions on how to use all the weighing functions that are built into your scale, please
read the following important guidelines:
o Always be sure that the display shows `Zero` before use, if it does not then please press the ZERO key.
o The equipment is designed to detect when a stable weight is achieved, your reading should be taken at this
point.
3.1
3.13.1
3.1.
. .
. LCD SYMBOL DESCRIPTION
LCD SYMBOL DESCRIPTIONLCD SYMBOL DESCRIPTION
LCD SYMBOL DESCRIPTION
Display
DisplayDisplay
Display Description
DescriptionDescription
Description
[→ 0 ←]
Zero symbol: If the scale does not show exactly zero value although the scale pan is
unloaded, press the [[[[→0000←]
] ]
] key. After a short waiting time, the scale will be zeroed again.
Stable symbol: If the display shows the stabilization display [ο], the scale is in the stable
condition. When the scale is in the unstable condition, the stabilization display [ο]
disappears.
- Minor weight: Weight under zero.
LOW Low Battery: Battery need to change or replace.
BMI
Calculated value of the body mass index (BMI).
HOLD
Hold function / saving function is active.
PRE-TARE
Initially set tare value is active.
NET
The net weight is displayed.
WEIGHT
The present weight value is displayed.
PRE-
TARE Indication
kg
NET WEIGHT Indication
WEIGHT Indication
HOLD Indication
Stable symbol
Minor weight
Zero symbol
Low Battery
USER’S MANUAL
MA27-02/B
6
3.2
3.23.2
3.2.
. .
. KEY FUNCTIONS
KEY FUNCTIONSKEY FUNCTIONS
KEY FUNCTIONS
Designation
Designation Designation
Designation Function
Function Function
Function
ON/OFF-switch Turn ON/OFF the scale
PRINT button Data transmission via interface(Print-out the results)
BMI button Determine Body Mass Index
HOLD button To hold weighing result on the display / determine stable weighing value
ZERO setting key To reset the display to 0.0kg display / Zero the scale (±2% of full capacity)
M1-5 button To store 5 pre-tare values
PRE-TARE button Setup target weight for tare before weighing
TARE button Tare weight during weighing process
CLEAR button To clear the wrong entry while entering digits
ENTER-key To confirm the performing functions
Numeric keys Numerical value Entering digits
3.3
3.33.3
3.3.
. .
. WEIGHING
WEIGHINGWEIGHING
WEIGHING
Switch on the scale with the [ON/OFF]
[ON/OFF] [ON/OFF]
[ON/OFF] key. The diagnostic scale self-check is performed and then the software
version is displayed. The scale is ready for weighing when the “0,00 kg
0,00 kg0,00 kg
0,00 kg” weight display is shown.
NOTE: If “0,00 kg” won’t display on the screen, press [[[[→0000←]]]] key to zero the scale, [[[[→0000←]
] ]
] can be used any time
to zero the scale.
Place a person in the middle of the scale. Wait until the stability display (ο) is shown and then read the weighing
result.
DIRECTION: If a person is heavier than the weighing range, the display will show the “Err” symbol (= overload).
3.4
3.43.4
3.4.
. .
. TARING
TARINGTARING
TARING
Tare allows the user to zero the instrument to cancel the weight of a container/ clothes from the reading of the
instrument, thus giving the true weight of the product/ person being tested.
o Turn on the scale using [ON/OFF]
[ON/OFF][ON/OFF]
[ON/OFF] key.
Loading...