DATOptic RM5R5 User Manual
User’sguideforRM5R5
r
Introduction
EBOX-R5 is one to Five SATA Port Multiplier RAID Controller
with LCD Module. It is designed to provide SATA port expansion,
data protection and performance aggregation at various
applications.
EBOX-R5 uses market-proven Multi-port Serial ATA PHY
technology and proprietary storage processor to provide very
high efficient SATA RAID operation. With an easy configuration
scheme, the device can be a pure port multiplier which provides
SATA port expansion just like a SATA Hub, or hard-drive
performance booster which provides a high performance device
seen by host controller or hard-drive data protector which
automatically backup data to prevent data loss from hard-drive
damage. EBOX-R5 also has advance mode to provide both
benefit of performance boost and data protection.
EBOX-R5 is a self-contained storage processor chip which
completely frees up the main CPU loading and the SATA ports
comply with eSATA specification, making it suitable for use in
both internal system and external storage applications.
Application
Overview
LCD Screen
1. Monitor
Status LEDs
2. Power/RAID/Host Status
3. Device Status (Error, Activity/Link)
Buttons
4. Up, Down, Enter, ESC
Status LEDs
Device Erro
Blinking: Error or rebuilding
Off: Normal
Devic e Ac t ivity/ L i n k
On: Link
Off: unlink
Blinking: Activity
Power Status
On: power is on
Off: power is off
RAID Status
On: RAID Degraded
or RAID Error
Off: Normal
Blinking: Rebuilding
Host Status
On: Link
Off: unlink
Blinking: Activity
Configure RAID Subsystems on LCD:
Be aware this will destroy all your existing data on these drives, so make
sure you have backup!
Key Function
Up Arrow
Down Arrow
ENT Key ENT Submit Select ion Function (Confirm a selected Item)
ESC Key ESC Return to Previous Screen (Exit a selection configuration)
Use to scroll the cursor Upward/Rightward
Use to scroll the cursor Downward/Leftward
1. Turn on the SPM394, the main menu appears on the LCD
screen.
2. Press on “ENT” key to quick setup.
3. Press on “ENT” key to create on RAID.
6. Press “ENT” key to create RAID.
7. RAID subsystem is Initializing the RAID.
8. Completed.
4. Using up or down arrow key, select RAID level and press
“ENT” key to confirm it.
5. Using up or down arrow key, set your password or press “ENT”
key to skip password.
Loading...