Datel Xport 360 User Manual

Xport 360 User Manual

CON TENTS

INTRODUCTION ............................................................................................................................................... 2

ACK CONTENTS

...................................................................................................................................................... 2

YSTEM REQUIREMENTS

............................................................................................................................................ 2

INSTALLING THE XPORT 360 SOFTWARE .......................................................................................................... 3

CONNECTING THE XPORT HARDWARE TO YOUR PC ......................................................................................... 3

CONNECTING DEVICES TO YOUR XPORT .......................................................................................................... 4

BOX

360 H

ARD DRIVE

............................................................................................................................................ 4

BOX

360 M

EMORY CARDS

...................................................................................................................................... 4

BOX 1 MEMORY CARDS

.......................................................................................................................................... 4

INSTALLING USB DRIVERS (VERSION 2 NEW USB DRIVERS) .............................................................................. 4

XPORT 360 SOFTWARE .................................................................................................................................. 10

XPORT 360 SOFTWARE - INTRODUCTION ....................................................................................................... 10

CCESSING FILES ON YOUR XBOX

360

HARD DRIVE

....................................................................................................... 10

ONNECTING TO YOUR XBOX

360

HARD DRIVE USING

XPORT 360 ................................................................................ 11

UNDERSTANDING THE XBOX 360 FILE SYSTEM .............................................................................................. 12

USING DOWNLOADED XBOX 360 GAME SAVES ............................................................................................. 14

SING DOWNLOADED GAMESAVES – A STEP BY STEP GUIDE

......................................................................................... 14

WORKING WITH XBOX 360 MEMORY CARDS ................................................................................................. 15

CONVERTING .Z36 FILES TO .BIN .................................................................................................................... 16

O CONVERT THE

.Z36

FILE TO A

.BIN

FILE

: ................................................................................................................ 16

COPYING A GAME SAVE TO YOUR 360 MEMORY CARD OR HARD DISK .......................................................... 16

1. C

OPY FROM A MEMORY CARD IMAGE (.Z36 OR .BIN

) ........................................................................................... 16

2. C

OPY A GAME SAVE FOLDER

............................................................................................................................ 18

COPYING ONE XBOX 360 HARD DRIVE TO ANOTHER ..................................................................................... 20

BOX

360 H

ARD DRIVE SECURITY SIGNATURE

(HASH N

UMBER

) ................................................................................... 20

RANSFERRING PROFILES AND ALL SAVES

................................................................................................................... 20

BROKEN HARD DISKS, SECURITY SECTORS AND “PART” BACKUP IMAGES ..................................................... 22

TRANSFERRING XBOX 1 SAVES TO YOUR XBOX 360 ....................................................................................... 23

RANSFERRING XBOX 1 GAMESAVES – A STEP BY STEP GUIDE

....................................................................................... 23

UNDELETE / SHOW DELETED FILES ................................................................................................................. 25

NDELETE USAGE

.................................................................................................................................................. 25

SUPPORT ....................................................................................................................................................... 27

INTRODU C T I O N

Congratulations on your purchase of Datel’s XPORT for Xbox 360.

XPORT is a hard drive docking system that allows you to connect your Xbox 360’s hard drive to your PC without making any hardware modifications to your hard drive or Xbox 360, and without needing to have your Xbox 360 near your PC.

With your XPORT docking station connected to your PC (via the supplied USB cables), you can instantly connect Xbox 360 hard drives and memory cards and even Xbox 1 memory cards.

The PC software included with Xport provides an intuitive Windows-based interface, allowing you to move files between Xbox and Xbox 360 devices and your PC with ease.

PACK C O N T ENTS

Before getting started, please check that all parts are present. If anything is missing; please contact customer services (see end of manual).

• 1 x XPORT docking unit (with two USB cables attached)

• 1 x Xbox to Xbox 360 memory card adapter cable

• 1 x PC Software CD

• 1 x User manual

SY S T E M R E QUIREMENTS

In order to use XPORT for Xbox 360, you need a computer and console set-up that meets the following minimum system requirements:

MINIMUM SYSTEM REQUIREMENTS

Computer / Processor

• Personal computer with 800Mhz processor

• 256Mb RAM

• 800x600 SVGA display

Hard Drive

• 5Mb free hard drive space for installation

• Up to 20GB free hard drive space for complete back-up

Connectivity

• At least one free USB port.

• Two USB ports required for direct transfer between a

memory card and Xbox 360 hard drive.

• USB 2.0 highly recommended for high-speed data transfer

O/S

• Microsoft Windows XP Home or XP PRO

Console

• Xbox 360 with official Xbox 360 hard drive

Optional

• Xbox 360 memory card(s)

• Xbox memory card(s)

INST ALLI NG T H E X P O R T 360 SOFTWARE

Insert the XPORT 360 software CD ROM, and follow the on-screen prompts to install the software on your PC. If the CD does not auto-run, browse to the CD and run the ‘SETUP’ program.

After installation, leave the CD ROM in your drive until you connect a device (see next chapter) to the XPORT dock. At this point you’re most likely prompted to install drivers. Direct Windows to the root of the installation CD for these drivers. Once this has happened, you can remove the software CD. If you are not installing from CD Rom or have downloaded an update from the web, any new versions of the drivers can be found in the installed programs folder (usually “C:\program files\datel\Xport 360” or “C:\program files (x86)\datel\Xport 360”

At the end of the installation, you have the option to have a short-cut icon created on your desktop.

CON NECTI N G T H E X PORT HARDWARE TO YOU R PC

XPORT has two high-speed USB leads integrated into its moulding. One lead is used to connect your PC to your Xbox 360’s hard drive, with the other used to connect your PC to memory cards plugged into XPORT.

When the USB lead used for hard-drive connectivity is in use, a blue LED is illuminated on the front of the XPORT. The memory card’s USB lead does not illuminate the LED.

Naturally, if you only have one spare USB port on your PC, you can switch between the leads depending on whether you want to connect your computer to your console’s hard drive or its memory cards. But if you connect them both, you can position your docking station conveniently next to your PC and leave it there, and bring your hard drive or memory cards to your XPORT whenever you want to access their content using your PC.

CON NECTI N G D E V I C E S TO YOUR XPORT

XBOX 3 6 0 H A R D D R IVE

To connect an Xbox 360 hard drive to the XPORT dock, hook the rear of the hard drive (the rounded end) under the lip at the back of the XPORT dock before lowering the drive onto the hard drive connector inside the XPORT dock.

Ensure the connector aligns correctly before gently pushing down the front to latch the drive in place.

XBOX 3 6 0 M E M O R Y CARDS

Connect an Xbox 360 memory card to the XPORT dock by slotting it into the memory card port on the front of the dock.

XBOX 1 M E M O R Y C ARDS

Connect an Xbox 1 memory card to your XPORT dock using the supplied Xbox to Xbox 360 memory card adapter cable. Attach your Xbox card to one end of the cable (the larger socket end) and the other end to the memory card port on your XPORT dock.

INST ALLI NG U S B D RI VERS (VERSION 2 NEW U S B D R I V E R S)

Note for users updating from Version1.xx software: Version 2 of the Xport software uses updated drivers to

version 1. For this reason if you were previously using version 1.xx of the Xport software and had installed the USB drivers to use memory cards, you will need to update to the latest drivers.

Please note that the USB drivers are not required for Xbox 360 Hard Disk access, you only need to install the USB drivers if you intend to use Xbox 360 memory cards and/or original Xbox (Xbox 1) memory cards.

To start, plug in your Xport hardware and also plug in a memory card into the device. If any “New device” install drivers dialogs appear cancel them.

Open Devices Manager: Click the start button and click Run, in the Run box enter devmgmt.msc

If you are installing the USB drivers for the first time you will find two uninstalled devices called “Memory Unit” and “Xbox Security Method 3, ……”. You only need to install the driver for the memory unit but if you want to install for both of the new USB devices you can. Right click one of the devices to open the context menu and select “update driver”.

If you are updating from Version 1.xx of the Xport software and have the old USB drivers installed; Locate your existing Xport 360 device driver(s), they will be in the section “USBIO Controlled Devices” and be called “X360 MU USBIO – Device 1”. Right click one of the “X360 MU USBIO – Device 1” devices to open the context menu and select “update driver”.

The “Hardware Update Wizard” will appear.

In the “Hardware Update Wizard” select “no, not this time” and click next.

Select “Install from a list or specific location (Advanced)” and click next.

Click the “Don’t search. I will choose the driver to install” and click next.

Click the “Have Disk” button.

You now need to select the new driver file. Click the Browse button and locate the new “Xport360_usb_v2” driver file – it can be found at the install path:

32 bit Windows Xp/Vista:

C:\Program Files\Datel\Xport 360

Select the“Xport360_usb_v2.inf” file.

64 bit Windows XP/Vista:

C:\Program Files (x86)\Datel\Xport 360

Select the“Xport360_usb_v2_x64.inf” file.

The devices manager will now have the “Xport 360 USB V2 Device” listed in place of the old driver. If you have more than one Xbox 360 Xport device repeat the update driver process for that device too.

+ 18 hidden pages

Datel Xport 360 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual