Datel Go-tcha User Manual

for Pokémon GO

User Guide

What’s In The Box?

In your Go-tcha for Pokémon Go box you should
receive:

x1 Go-tcha USB device
x1 Go-tcha wrist band
x1 Go-tcha USB charger cable

Thank you for purchasing the Go-tcha
for Pokémon Go!

Enjoy Pokémon GO on the move without looking
at your smartphone!

Connecting Your Go-tcha

To connect your Go-tcha to the Pokémon App:
Open the Pokémon GO App
Touch the Main Menu
Touch Settings
Touch ‘Pokémon GO Plus’
Press the button on the Go-tcha to make it discoverable to the Pokémon Go App
Touch your ‘Pokémon GO Plus’ under Available Devices list to connect.

Using Your Go-tcha - Manual Catch

Go-tcha will vibrate and animate the screen to show a new/duplicate Pokémon is near.
Press the Go-tcha button/screen to catch the Pokémon.
Go-tcha will vibrate and animate the screen to show a successful/unsuccessful catch.

Go-tcha will vibrate and animate the screen to show when a Pokéstop is in range.
Press the Go-tcha button to retrieve items from a Pokéstop.
Go-tcha will vibrate and animate the screen to show it has successfully/unsuccessfully collected
the items and how many items it has collected.

See ‘Go-tcha Screens’ on pages 2-4 of this User Guide for a complete guide to the screen animation
alerts.

V1.5

Charging Your Go-tcha

The Go-tcha charges via USB. Simply remove the Go-tcha USB device from the wrist band, slide it
into the charger and connect to a USB power source.

Simply return the Go-tcha to the bracelet when fully charged. A full charge takes approx. 1 hour and
lasts for approx. 12 hours with continuous use. Standby time is approx. 48 hours.

Using Your Go-tcha - Auto Catch

To turn the ‘Auto-catch’ function on, press the the Go-tcha button until ‘

Auto-catch ON’ is selected.

If you have Auto Catch on:
Go-tcha will vibrate and animate the screen to show a successful/unsuccessful catch.
Go-tcha will vibrate and animate the screen to show it has successfully/unsuccessfully collected
the items and how many items it has collected at a Pokéstop.

To turn ‘Auto-catch’ off, press and hold the Go-tcha button until ‘

Auto-catch OFF’ is selected.

V1.5

IMPORTANT Please check that the Go-tcha is inserted correctly into the charger cable - Push the
Go-tcha FIRMLY into the cable to ensure that it is fully seated. Once inserted correctly you can check
that your Go-tcha is charging by pressing the screen button. The charging animation will appear to
confirm that the Go-tcha is charging. If there is any other Go-tcha animation running, then wait for the
animation to stop and the screen is blank - now press the screen button to confirm the charging
animation is displayed.

If the charge animation is not showing then your Go-tcha is NOT charging.

TROUBLE SHOOTING.

Make sure that the Go-tcha is pressed firmly into the charger cable and repeat the above steps.

The charger cable is made from soft material and can get pushed out of shape - if the Go-tcha unit
feels loose when inserted or battery animation does not show, then gently squeeze the sides of the
cable slot/cradle tightly together and then re-insert the Go-tcha unit - if the charge animation is still not
showing, repeat these steps.

Make sure that the USB port is providing constant power. Many devices with power saving modes will
turn off power to the USB port if there is no USB device present.

Even though Go-tcha charges from a USB port it is not seen as a USB device. Some rechargeable
power packs will also stop powering if a USB device is not present.