Dataview DAVI-1500N Users Manual
LCD MONITOR
USER'S MANUAL
LCD MONITOR
USER'S MANUAL
¥°. Parts Description
Connecting a PC
15£¢
17£¢
18.1£¢
POWER VGA S-VIDEO VIDEO IN AUDIO PC AUDIO
VGA S-VIDEO VIDEO
¥°. Parts Description
Connecting the VCR, DVD, TV or Other External Device
To view television channels correctly, a signal must be received by the set from one of following
sources :
£ª An outdoor aerial
£ª An indoor aerial (not recommendable)
£ª A cable television network
1. In the first three cases, connect the aerial or network input cable to the 75 ohm coaxial socket
on the bottom of the television.
2. Press the TV mode button on the remote controller.
(TV Function is optional with users.)
RL IN OUT
TV ANTDC POWER
L R
AUDIO
TV ANT
IN OUT
AUDIO
15£¢
17£¢
18.1£¢
POWER VGA S-VIDEO VIDEO IN AUDIO PC AUDIO
VGA S-VIDEO VIDEO IN
TV ANTDC POWER
RL IN OUT
L R
AUDIO
IN OUT
PC AUDIO
TV ANT
1. Turn off your computer and monitor.
2. Connect a PC D-Sub (VGA) cable between your PC and VGA of the
monitor. And then fasten the screws of both sides of the cable.
3. Connect a DC Power cable to the power
input jack of the monitor.
4. Power on the computer before turning on the monitor.
1. Connect video and audio cable according to the sharpe and color of the video/audio cable.
£ª When an external device is in MONO, the audio connection cable can be connected to either
the left or the right and S.MODE should be set FM MONO.
2. For optimal visual image, use S-VIDEO connector instead of video (yellow) connector.
LCD MONITOR
USER'S MANUAL
LCD MONITOR
USER'S MANUAL
¥±. Before using the monitor
Instructions
- This monitor conforms to VESA DPMS regulations
- This monitor has tested and passed all the regulations regarding electromagnetic interference
- The LCD panel consists of 3,840¡¿3,072 dots so some dots can be seen as bright
or dark but never affects the monitor function
- The brightness of upper and lower part of the screen could be seen different because of
viewing angle
- The optimum resolution is 1,280¡¿1,024 at 60Hz, so check with your PC graphic card
- When your display status is not good enough to look, press ¡°AUTO¡± key
- There are VESA mount holes in the back of your monitor for wall-mount
- Please use only the adaptor supplied with the monitor otherwise you will not be able to
receive free A/S when out of order
- There could be noises in particular graphic card of your PC, then adjust manually by
changing the values of phase or clock
¥±. Before using the monitor
Initial set PC mode
1. Power on your monitor by pressing the POWER button on
SELECTPOWER
CH ¡ã
MENU
CH ¡å
3
2
5
6
9
8
EXIT
0
TV
VOL +
MUTE
SCAN
AUTO
1
4
7
PC
VOL -
When the Screen is unstable or the TV channel does not change
the main set or on the remote controller
2. Press the PC button on the remote controller to switch to
the PC mode
Then the PC screen is automatically set.
When a CD-Title runs, the music can be heard from the
speakers
3. Before operation, set the PC resolution by 1280¡¿1024, and
true color (15£¢ 1024¡¿768)
1. Press MENU button, the main menu is displayed
2. Use ¡ã, ¡å button, select¡°MISCELLANEOUS¡±
3. Select initialize
4. Close the MENU window and press AUTO button
5. 15£¢ is select¡°AUTO¡± in the OSD menu window
¡Ø There will be some noises under the Certain VGA card.
Whe n the noise would not disappear Auto adjustment, adjust manually.
Loading...