Datavideo AM-100, VP-605H Instruction Manual

AM-100

AUDIO MIXER

Instruction manual

- 2 -

Table of Contents

FCC COMPLIANCE STATEMENT ........................................................................... - 3 -

WARNINGS AND PRECAUTIONS ......................................................................... - 3 -

WARRANTY ........................................................................................................ - 4 -

S

TANDAR D WARRANTY .............................................................................................. - 4 -

T

HREE YEAR WARRANTY ............................................................................................ - 4 -

DISPOSAL ........................................................................................................... - 5 -

PRODUCT FEATURES .......................................................................................... - 6 -

CONNECTIONS & CONTROLS .............................................................................. - 6 -

F

RONT PANEL .......................................................................................................... - 6 -

R

EAR PANEL ............................................................................................................ - 8 -

A+V (AUDIO-FOLLOW-VIDEO)............................................................................. - 9 -

AUDIO INPUTS AND LEVELS ............................................................................... - 9 -

TALLY INPUT CONNECTOR (A+V FEATURE) .........................................................- 10 -

EXAMPLE CASCADE SETUP ................................................................................- 10 -

SPECIFICATIONS ................................................................................................- 11 -

SERVICE & SUPPORT .........................................................................................- 12 -

Disclaimer of Product & Services

The information offered in this instruction manual is intended as a guide only. At all times,
Datavideo Technologies will try to give correct, complete and suitable information. However,
Datavideo Technologies cannot exclude that some information in this manual, from time to time,
may not be correct or may be incomplete. This manual may contain typing errors, omissions or
incorrect information. Datavideo Technologies always recommend that you double check the
information in this document for accuracy before making any purchase decision or using the
product. Datavideo Technologies is not responsible for any omissions or errors, or for any
subsequent loss or damage caused by using the information contained within this manual. Further
advice on the content of this manual or on the product can be obtained by contacting your local
Datavideo Office or dealer.

- 3 -

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause
undesired operation.

Warnings and Precautions

1. Read all of these warnings and save them for later reference.

2. Follow all warnings and instructions marked on this unit.

3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol

cleaners. Use a damp cloth for cleaning.

4. Do not use this unit in or near water.

5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious

damage.

6. Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To ensure

safe and reliable operation of this unit, and to protect it from overheating, do not block or
cover these openings. Do not place this unit on a bed, sofa, rug, or similar surface, as the
ventilation openings on the bottom of the cabinet will be blocked. This unit should never be
placed near or over a heat register or radiator. This unit should not be placed in a built-in
installation unless proper ventilation is provided.

7. This product should only be operated from the type of power source indicated on the marking

label of the AC adapter. If you are not sure of the type of power available, consult your
Datavideo dealer or your local power company.

8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord

will be walked on, rolled over, or otherwise stressed.

9. If an extension cord must be used with this unit, make sure that the total of the ampere ratings

on the products plugged into the extension cord do not exceed the extension cord rating.

10. Make sure that the total amperes of all the units that are plugged into a single wall outlet do

not exceed 15 amperes.

11. Never push objects of any kind into this unit through the cabinet ventilation slots, as they may

touch dangerous voltage points or short out parts that could result in risk of fire or electric
shock. Never spill liquid of any kind onto or into this unit.

12. Except as specifically explained elsewhere in this manual, do not attempt to service this

product yourself. Opening or removing covers that are marked “Do Not Remove” may expose
you to dangerous voltage points or other risks, and will void your warranty. Refer all service
issues to qualified service personnel.

13. Unplug this product from the wall outlet and refer to qualified service personnel under the

following conditions:

a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal operating conditions. Adjust

only those controls that are covered by the operating instructions in this manual; improper
adjustment of other controls may result in damage to the unit and may often require
extensive work by a qualified technician to restore the unit to normal operation;

e. When the product has been dropped or the cabinet has been damaged;
f. When the product exhibits a distinct change in performance, indicating a need for service.

- 4 -

Warranty

Standard Warranty

• Datavideo equipment are guaranteed against any manufacturing defects for one year from the

date of purchase.

• The original purchase invoice or other documentary evidence should be supplied at the time of

any request for repair under warranty.

• The product warranty period beings on the purchase date. If the purchase date is unknown,

the product warranty period begins on the thirtieth day after shipment from a Datavideo office.

• Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered

under warranty.

• Viruses and malware infections on the computer systems are not covered under warranty.

• Any errors that are caused by unauthorized third-party software installations, which are not

required by our computer systems, are not covered under warranty.

• All mail or transportation costs including insurance are at the expense of the owner.

• All other claims of any nature are not covered.

• Cables and batteries are not covered under warranty.

• Warranty only valid in the country or region of purchase.

• Your statutory rights are not affected.

Three Year Warranty

• All Datavideo products purchased after July 1st, 2017 are qualified for a

free two years extension to the standard warranty, providing the product is
registered with Datavideo within 30 days of purchase.

• Certain parts with limited lifetime expectancy such as LCD panels, DVD

drives, Hard Drive, Solid State Drive, SD Card, USB Thumb Drive, Lighting, Camera module, PCIe
Card are covered for 1 year.

• The three-year warranty must be registered on Datavideo's official website or with your local

Datavideo office or one of its authorized distributors within 30 days of purchase.

- 5 -

Disposal

For EU Customers only - WEEE Marking

This symbol on the product or on its packaging indicates that this product must
not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic

equipment. The separate collection and recycling of your waste equipment at the
time of disposal will help to conserve natural resources and ensure that it is recycled in a manner
that protects human health and the environment. For more information about where you can drop
off your waste equipment for recycling, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.

CE Marking is the symbol as shown on the left of this page. The letters "CE" are
the abbreviation of French phrase "Conformité Européene" which literally means
"European Conformity". The term initially used was "EC Mark" and it was
officially replaced by "CE Marking" in the Directive 93/68/EEC in 1993. "CE

Marking" is now used in all EU official documents.

- 6 -

Product Features

• 1U 19" rackmountable professional audio mixer

• Ultra compact 4 input + 2 AUX mixer featuring low noise, high-headroom design

• Four studio-grade Dynamic Range mic preamps with:

1. Ultra –wide 60dB gain range

2. 130dB dynamic range

3. +22dBu line input handling

4. Extended low-frequency response

5. Distortion under 0.0007% (20Hz~20KHz)

6. Phantom power for studio condenser mics

• Six high-headroom line inputs

• Advanced DC pulse transformer RF rejection

• 18 dB/ octave, 100Hz low-cut filter on mic input channels

• High resolution 8 segment stereo meters

• Supports both Line or Microphone with 48v Phantom power

• Fifth auxiliary channel can be used as line or for daisy chaining with other AM-100 (upto 12

channels)

• When used with SE-900 & MS-900 the AM-100 provides synchronized audio follow video using

a 15-pin D-Sub connection

Connections & Controls

Front Panel

Power Switch

Switches the power On / Off.

Headphone

Accepts a stereo mini jack plug for stereo headphones. The
headphone volume is adjusted by the rotating Head phone volume
control.

Headphone Volume Control

Controls Headphone volume level.
Use the Headphone section to accurately monitor any of the
sources.

- 7 -

Audio LED Meters

These meters play a vital part in correctly setting the audio levels to
avoid clipping or other distortion.
The LED style Audio meters, show the signal strength at the Audio
Output. The signal they measure is determined by the sources
selected by the Audio Bus selectors and the levels set by the rotary
pots and faders.

Audio Monitor Button

Use the Headphone section to monitor any of the sources (CH1, CH
2, CH3, CH4) or “Master” output. Repeated presses of the
Headphone Audio Monitor button will cycle through the monitoring
choices. In many cases, headphones may be a more useful and
accurate choice than speakers for audio monitoring.

Audio Input Source Level Controls

This section of the AM-100 controls which audio input channel
(CH1~CH4) will be sent to the Audio Bus and its associated Fader.
This row of audio channel selection buttons has LEDs built in to
show which input channel is active. Level control for each audio
input source is via the rotary pots above each of the audio channel
selection buttons.

A+V (Audio-Follow-Video)

When this button is engaged or lit, the audio associated with a
selected video input source automatically follows the video through
any transition between the Main and Sub Sources. When the A+V
button is inactive, the audio sources must be switched manually. For
more information, see A+V

.

AUX Audio Input

Mix input for background music

Audio mixer

These CH1~CH4 Audio Level Faders are for controlling the CH1~CH4
audio mix.
These faders correspond to the Audio Source selector buttons and
control the relative volume of each input in the master output as
well as the master output level.

MASTER

This Slider is for controlling the audio level for the Mixed audio
output.

- 8 -

Rear Panel

AUX Audio Output

2 channels of XLR Balanced Audio output.

AUX Audio Input

Mix input for background music or daisy chaining AM-100 units
together. To daisy chain units together, take the AUDIO OUT pair
from the first unit and connect these to the AUX IN on the second
unit. For more information, see Example Cascade Setup

.

AUDIO IN

The AM-100 supports four XLR Balanced Audio Input channels.

There are two kinds of switches under AUDIO IN:

LINE/MIC switch is used to set the audio as LINE in or MIC in. When
LINE in is selected please also set the 48V ON/OFF switch to OFF in
order to prevent burn-out damage to the circuit.

The 48V ON/OFF switch is for phantom power. If you want to use
MIC in, please set the LINE/MIC switch first, and then if using a
Condenser microphone turn ON the 48V ON/OFF switch. If you
wish to use a Dynamic microphone please turn OFF the 48V

ON/OFF switch.

TALLY

TALLY IN socket. This supplies tally source, control output by A+V.

For more information please see the A+V

.

DC IN – 4pin XLR

DC in socket connect the supplied 12V 2.5A PSU to this socket. The
connection can be secured by screwing the outer fastening ring of
the DC In plug to the socket.

Grounding Terminal

When connecting this unit to any other component, make sure that
it is properly grounded by connecting this terminal to an
appropriate point. When connecting, use the socket and be sure to
use wire with a cross-sectional area of at least 1.0 mm

2

.

- 9 -

A+V (Audio-Follow-Video)

The Audio Input Channel Selectors and Level pots are
the first stage in the audio signal path. Each channel
carries the audio associated with a video input
channel. When the A+V button is active, the audio

follows the video through a transition. This means that
when this LED is lit, only one channel of the Audio input section (CH1, CH2, CH3, CH4) can be
activated at a time. When the transition is a CUT, the audio will switch abruptly at the same time.

Try this: With the A+V button engaged or lit, select Channel 2 on the Main Source bus (of course,
you must have a valid video and audio source connected). Notice that CH2 is lit in the Audio Source
section. Now, select channel 1 on the Sub Source bus. Work the T-Bar to manually perform a
transition (if no specific transition is selected, the sources will dissolve) and watch Audio Input
Source channel change from CH2 to CH1, following the video.

When the A+V button is not engaged or off, you can manually select which of the 4 Audio input
channels will be applied to the Video bus at the Fader. In fact, you have to select one or more of
these channels, or there will be no audio present at the audio out connections.

The A+V button should be inactive while doing level settings at the beginning-of-session so that
you can select an input and adjust the initial level correctly.

Audio Inputs and Levels

Analogue audio comes into the AM-100 through the XLR connectors on the rear panel (see above
diagram). The AM-100 supports four XLR Balanced Audio Input channels.

There are two kinds of switches next to each XLR input under AUDIO IN:

The LINE/MIC switch is used to set the audio as LINE in or MIC in. When LINE in is selected please
also set the 48V ON/OFF switch to OFF in order to prevent burn-out damage to the audio
circuit/Mic*.

The 48V ON/OFF switch is for Phantom power. If you want to use MIC in, please set the LINE/MIC
switch first, and then if using a Condenser microphone* turn ON the 48V ON/OFF switch. If you
wish to use a Dynamic microphone please turn OFF the 48V ON/OFF switch.

*NOTE: Always double check the manual for the microphone being used to see what advice it
gives regarding power as some Mics have internal batteries too.

- 10 -

Tally Input Connector (A+V feature)

The Tally output from a video mixer allows the AM-100 to automatically switch between audio
sources with the video mix.

D-Sub 15PIN Female

PIN assignment of the Tally Connector is shown in the table below:

Audio Channels

CH 1 CH 2 CH 3 CH 4

Pin 1 Pin 6 Pin 11 Pin 5

GND Pins 4 / 9 / 14

Example Cascade Setup

It is possible to cascade or daisy chain several AM-100 units together. This allows more audio
sources to be added to the set up and provided at the final mixed output. To daisy chain units
together take the AUDIO OUT pair from the first unit and connect these to the AUX IN on the
second unit. Below diagram shows 3 units connected in this way.

- 11 -

Specifications

Audio Input

Parameter

Specifications

Limit

Units

Conditions/Comments

MIC/Lin Connectors (CH1~CH4)

3Pin XLR Female

Pin2=(+)

Pin3=(-)

Pin1=GND

Mic/Lin Input Impedance

3K/5.5K

1% Ω

Mic Gain Range

off to +80

±1.5

dB

Audio source GAIN (knob)

Line Gain Range

off to +20

±1.5

dB

Audio source GAIN (knob)

Signal to noise ratio

-70

min

dB

@1KHz, 0dB (Lin IN)

THD+N

0.06

max % @1KHz, 0dB (Lin IN)

Frequency Response

20Hz~20KHz

±3

dB Lin in Max Level

+26dBu

±3%

dB

AUX IN

Parameter

Specifications

Limit

Units

Conditions/Comments

AUX Input (CH A – CH B)

Line Connectors

3 PIN XLR Female

Pin2=(+)

Pin3=(-)

Pin1=GND

Line Input Impedance

45K

1% Ω

Line Gain Range

off to +20

±1.5

dB

AUX IN(knob)

Signal to noise ratio

-70

min

dB

@1KHz,0dB

THD+N

0.06

max % @1KHz,0dB

Frequency Response

20Hz~20KHz

±3

dB

Audio Output

Parameter

Specifications

Limit

Units

Conditions/Comments

Connector

3 PIN XLR Male

Pin2=(+)

Pin3=(-)

Pin1=GND

Impedance

300

1% Ω

Gain Range

off to +20

±1.5

dB

Audio Mixer (CH1~CH4)
(knob)

Output Max Level

+26dBu

±3%

dB

Headphone

Parameter

Specifications

Limit

Units

Conditions/Comments

Connector

1/4 ” TR S

Tip(+)

Ring=(-)

Sleeve=GND

Signal to noise ratio

-70

min

dB

@1KHz,0Db(Lin IN)

THD+N

0.5

max % @1KHz,0Db(Lin IN)

Frequency Response

20Hz~20KHz

±3

dB

Others

Parameter

Specifications

Limit

Units

Conditions/Comments

Phantom Power

+48V

±3%

VDC

Power Consumption

+12V,1.5A(18W)

±3%

watts

Power Input connector

4Pin XLR Male

Pin4=(+)
Pin1=GND

Dimensions

440 X 155 X 4.5

±1%

mm

L X W X H

Specifications are subject to change without notice

DATAVIDEO WORLDWIDE OFFICES

Tel: [phone]
Fax:[phone]
E-mail:[e-mail]-mail: [e-mail]

China Shanghai

Datavideo Technologies China Co
601,Building 10,No.1228,
Rd.Jiangchang,
Jingan District,Shanghai
Tel: [phone]
Fax:+ 86 21-5603 6770
E-mail: [e-mail]

Singapore

Datavideo Visual Technology(S) Pte Ltd
No. 178 Paya Lebar Road #06-07
Singapore 409030

Tel: [phone]
Fa x:[phone]
E-mail:[e-mail]

Singapore

Datavideo Technologies Co. Lt d
10F. No. 176, Jian 1st Rd.,Chung Ho

District, New Taipei City 235, Taiwan

Tel: [phone]

Fax:[phone]
E-mail:service@dat avideo.com.tw

Taiwan

Datavideo Corporat ion
7048 Elmer Avenue.
Whittier, C A 90602,
U.S.A.

United States

Data video U K Limited
Brookfield House, Brookfield Industrial
Estate, Peakdale Road, Glossop,
Derbyshire, SK13 6LQ
Tel: [phone]
Fa x: [phone]
E-mail: sales@dat avideo.co. uk

United Kingdom

Datavideo Technologies China Co

902, No. 1 business building,
Xiangtai Square, No. 129,
Yingxiongshan Road, Shizhong District,
Jinan City, Shandong Province, China

Tel: [phone]
E-mail: [e-mail]

China Jinan

Datavideo France s.a.r.l.
Cité Descartes 1, rue Albert Einstein
Champs sur Marne 774477 –
Marne la Vallée cedex 2
Tel: [phone]
Fa x: [phone]
E-mail: [e-mail]

France

Datavideo Hong K ong Ltd

G/ F.,26 Cross Lane
Wanchai, Hong Kong

Tel: [phone]
Fax:+ 852-2833-9916
E-mail: info@dat avideo.com.hk

Hong Kong

Datavideo India Noida

Fax:[phone]
E-mail: [e-mail]

Tel: [phone]

A-132, Sec-63,Noida-201307,
India

India Noida

Datavideo India Kochi

Tel: [phone]
Fax:[phone]

2nd Floor- North Wing, Govardhan Building,
Opp. NCC Group Headquaters, Chittoor Road,
Cochin- 682035

India Kochi

Data video Technologies Europe BV
Floridadreef 106
3565 AM Ut rech t,
Th e Netherlands
Tel: [phone]
Fa x: [phone]
E-mail: info@dat av ideo.n l

Netherlands

China Beijing

Datavideo Technologies China Co
No. 812, Building B, Wankai Center,

No.316, Wan Feng Road, Fengtai District,
Beijing, China
Tel: [phone]
Fax:[phone]
E-mail: [e-mail]

Datavideo Technologies China Co
A1-2318-19 Room,No.8, Aojiang Road,
Taijiang District,Fuzhou,Fujian,China

Tel: [phone]
Fax:[phone]
E-mail: [e-mail]

China Fuzhou

Datavideo Technologies China Co
B-823,Meinian square,No.1388,
Middle of Tianfu Avenue,Gaoxin District,
Chengdu,Sichuan
Tel: [phone]
Fax:[phone]
E-mail: [e-mail]

China Chengdu

Data video Technologies (S) PTE Ltd
No. 178 Paya Lebar Road #06-03
Singapore 409030

Tel: [phone]
Fa x:[phone]
E-mail:s ales@dat av ideo.sg

It is our goal to make owning and using Datavideo products a satisfying experience. Our support sta󰀨 is available

to assist you to set up and operate your system. Contact your local office for specific support requests. Plus,
please visit www.datavideo.com to access our FAQ section.

All the trademarks are the properties of their respective owners. Datavideo Technologies Co., Ltd. All rights reserved 2018

Jul-11.2017

Service & Support

Please visit our website for latest manual update.

www.datavideo.com/product/AM-100