HD/SD-SDI to Component-YUV Converter
DAC-50
Quick Start Guide
www.datavideo-tek.com
Table of Contents
Warnings and Precautions ................................................................ 2
What’s in the box? ............................................................................. 4
Introduction........................................................................................ 4
Features ............................................................................................ 4
Functions ........................................................................................... 5
DIP Switch Function .......................................................................... 7
Specification .................................................................................... 16
Service & Support ........................................................................... 17
1
Warnings and Precautions
1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not use
liquid or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this unit in or near water.
5. Do not place this unit on an unstable cart, stand, or table. The unit
may fall, causing serious damage.
6. Slots and openings on the cabinet top, back, and bottom are
provided for ventilation. To ensure safe and reliable operation of
this unit, and to protect it from overheating, do not block or cover
these openings. Do not place this unit on a bed, sofa, rug, or
similar surface, as the ventilation openings on the bottom of the
cabinet will be blocked. This unit should never be placed near or
over a heat register or radiator. This unit should not be placed in a
built-in installation unless proper ventilation is provided.
7. This product should only be operated from the type of power
source indicated on the marking label of the AC adapter. If you
are not sure of the type of power available, consult your
Datavideo dealer or your local power company.
8. Do not allow anything to rest on the power cord. Do not locate this
unit where the power cord will be walked on, rolled over, or
otherwise stressed.
9. If an extension cord must be used with this unit, make sure that
the total of the ampere ratings on the products plugged into the
extension cord do not exceed the extension cord’s rating.
2
10. Make sure that the total amperes of all the units that are plugged
into a single wall outlet do not exceed 15 amperes.
11. Never push objects of any kind into this unit through the cabinet
ventilation slots, as they may touch dangerous voltage points or
short out parts that could result in risk of fire or electric shock.
Never spill liquid of any kind onto or into this unit.
12. Except as specifically explained elsewhere in this manual, do not
attempt to service this product yourself. Opening or removing
covers that are marked “Do Not Remove” may expose you to
dangerous voltage points or other risks, and will void your
warranty. Refer all service issues to qualified service personnel.
13. Unplug this product from the wall outlet and refer to qualified
service personnel under the following conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal
operating conditions. Adjust only those controls that are
covered by the operating instructions in this manual;
improper adjustment of other controls may result in damage
to the unit and may often require extensive work by a
qualified technician to restore the unit to normal operation;
e. When the product has been dropped or the cabinet has been
damaged;
f. When the product exhibits a distinct change in performance,
indicating a need for service.
3
What’s in the box?
Items Description Q’ty
1 DAC-50 1
2 Switching Adaptor 12V/1.5A 1
3 DAC-50 Instruction Manual 1
Introduction
The Datavideo DAC-50 is stand alone HD/SD-SDI Video input source
transforms to HD/SD YUV video output source converter, and it can
change YUV output resolution by slide switch.
Features
6 Mode Resolutions
DC 12V input
HD/SD-SDI: Video Input: BNC x1
Video Output: HD/SD YUV component x1
HD/SD-SDI Input Resolutions:
720x480 Interlace
720x576 Interlace
1280x720 / 59.94Hz Progressive
1280x720 / 50Hz Progressive
1920x1080 / 59.94Hz Interlace
1920x1080 / 50Hz Interlace
HD/SD YUV Output Resolutions:
720x480 Interlace
720x576 Interlace
1280x720 / 59.94Hz Progressive
1280x720 / 50Hz Progressive
1920x1080 / 59.94Hz Interlace
1920x1080 / 50Hz Interlace
4
Functions
Front Panel
HD/SD - SDI Input
4:2:2 SDI Video data supports SMPTE 292M
standard at 1.5G Mbps.
SDI transfers professional level video signals and it’s
can connect to long distance transmission systems.
DIP Switch
Use slide switch can select output format.
5