
1
GETTING STARTED
DAC-100
What’s in the Box?
DAC-100
AC ADAPTER
S-VIDEO CABLE
(REQUIRES RED & WHITE RCA
AUDIO CABLE)
RCA VIDEO & AUDIO CABLE
FIREWIRE
(6 PIN MALE TO 6 PIN MALE)
INSTALLATION GUIDE
MANUAL
REGISTRATION CARD
SUPPORT INFO
AC ADAPTER
1
RCA VIDEO & AUDIO CABLE
3
2
4
S-VIDEO CABLE
FIREWIRE CABLE
6 PIN MALE TO 6 PIN MALE

2
INPUT SIDE
MEET THE DAC-100
Input Selector
FireWire
Input/Output
Source Indicator
Bit Rate Indicator
Audio
S-Video
Input
Audio Bit Rate Selector
Right Audio Input
Left Audio Input
Composite Video Input
OUTPUT SIDE
Right Audio Output
S-Video Output
(Behind the Plastic Cover)
Left Audio Output
Composite Video Output
Power Switch
AC Adapter Connector
Dip Switches
FireWire
Input/Output

3
CAPTURING
How to connect DAC-100 to capture Video from a VCR or Camcorder
1. Connect the RCA Video/audio cables from the VCR’s Line output to the input on the DAC-100.
2. Connect the FireWire cable to the DAC-100, connect opposite end to the PC or Mac’s FireWire Port.
3. Power on the DAC-100 and the VCR.
4. Start the Editing Software. (Not Supplied)
5. Press the DAC-100’s Source Button to switch it to “AV” and the A Encode Button to “16 bit”.
6. Go to the “Capture or Import” mode on the Editing software to begin capturing video to a PC or a MAC
SOURCE
A ENCODE
PRESS
Set to “AV”
PRESS
Set to “16 bit”
DAC-100 Input Side
FRONT (Input)
FireWire
FireWire to
PC/MAC

4
CAPTURING
How to capture Video from a VCR or Camcorder
1. Connect the S-Video cable and RCA audio cables from the VCR’s Line output to the input on the DAC-100.
2. Connect the FireWire cable to the DAC-100, connect the opposite end to the PC or Mac’s FireWire Port.
3. Power on the DAC-100 and the VCR.
4. Start the Editing Software. (Not Supplied)
5. Press the DAC-100’s Source Button to switch it to “AV” and the A Encode Button to “16 bit”.
6. Go to the “Capture or Import” mode on the Editing software to begin capturing video to a PC or a MAC.
SOURCE
A ENCODE
PRESS
Set to “AV”
PRESS
Set to “16 bit”
DAC-100 Input Side
FireWire
S-Video
FireWire to
PC/MAC