Datavideo CCU-100J, CCU-100P, CCU-100S Instruction Manual
CCU-100J / CCU-100P
/CCU-100S
Instruction manual
CAMERA CONTROL UNIT
- 2 -
Table of Contents
FCC COMPLIANCE STATEMENT ..................................................................................................................................... - 3 -
WARNINGS A ND PRECAUTIONS .................................................................................................................................... - 3 -
WARRANTY ......................................................................................................................................................................... - 4 -
STANDARD WARRANTY ...................................................................................................................................................................... - 4 -
THREE YEAR WARRANTY ................................................................................................................................................................... - 4 -
DISPOSAL............................................................................................................................................................................ - 5 -
1. PRODUCT OVERVIEW ........................................................................................................................................... - 6 -
1.1 FEATURES ........................................................................................................................................................................... - 6 -
2. EXAMPLE CCU-100 STUDIO SYSTEM BASED ON DATAVIDEO PRODUCTS............................................... - 7 -
3. CCU-100 CONNECTIONS & CONTROLS ............................................................................................................. - 8 -
3.1 FRONT PANEL ...................................................................................................................................................................... - 8 -
3.2 REAR PANEL ........................................................................................................................................................................ - 9 -
4. AD-2 (S/P/J) CONNECTIONS & CONTROLS ..................................................................................................... - 10 -
4.1 FRONT VIEW ..................................................................................................................................................................... - 11 -
4.2 REAR VIEW ....................................................................................................................................................................... - 12 -
4.3 SIDE VIEW ........................................................................................................................................................................ - 12 -
4.4 TOP VIEW ......................................................................................................................................................................... - 14 -
4.5 BOTTOM VIEW .................................................................................................................................................................. - 14 -
5. RMC-240 CONNECTIONS & CONTROLS .......................................................................................................... - 15 -
6. HP-3 CONNECTIONS & CONTROLS .................................................................................................................. - 16 -
6.1 FEATURES ......................................................................................................................................................................... - 16 -
7. FREQUENTLY-ASKED QUESTIONS................................................................................................................... - 16 -
8. SPECIFICATIONS .................................................................................................................................................. - 17 -
9. SERVICE & SUPPORT .......................................................................................................................................... - 20 -
Disclaimer of Product and Services
The information offered in this instruction manual is intended as a guide only. At all times, Datavideo
Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies
cannot exclude that some information in this manual, from time to time, may not be correct or may be
incomplete. This manual may contain typing errors, omissions or incorrect information. Datavideo
Technologies always recommend that you double check the information in this document for accuracy
before making any purchase decision or using the product. Datavideo Technologies is not responsible for
any omissions or errors, or for any subsequent loss or damage caused by using the information contained
within this manual. Further advice on the content of this manual or on the product can be obtained by
contacting your local Datavideo Office or dealer.
- 3 -
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1). This device may not cause harmful interference, and
(2). This device must accept any interference received, including interference that may cause undesired
operation.
Warnings and Precautions
1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a
damp cloth for cleaning.
4. Do not use this unit in or near water.
5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious
damage.
6. Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To ensure safe
and reliable operation of this unit, and to protect it from overheating, do not block or cover these
openings. Do not place this unit on a bed, sofa, rug, or similar surface, as the ventilation openings
on the bottom of the cabinet will be blocked. This unit should never be placed near or over a heat
register or radiator. This unit should not be placed in a built-in installation unless proper ventilation
is provided.
7. This product should only be operated from the type of power source indicated on the marking label
of the AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer
or your local power company.
8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will
be walked on, rolled over, or otherwise stressed.
9. If an extension cord must be used with this unit, make sure that the total of the ampere ratings on
the products plugged into the extension cord do not exceed the extension cord rating.
10. Make sure that the total amperes of all the units that are plugged into a single wall outlet do not
exceed 15 amperes.
11. Never push objects of any kind into this unit through the cabinet ventilation slots, as they may
touch dangerous voltage points or short out parts that could result in risk of fire or electric shock.
Never spill liquid of any kind onto or into this unit.
12. Except as specifically explained elsewhere in this manual, do not attempt to service this product
yourself. Opening or removing covers that are marked “Do Not Remove” may expose you to
dangerous voltage points or other risks, and will void your warranty. Refer all service issues to
qualified service personnel.
13. Unplug this product from the wall outlet and refer to qualified service personnel under the
following conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal operating conditions. Adjust
only those controls that are covered by the operating instructions in this manual; improper
adjustment of other controls may result in damage to the unit and may often require
extensive work by a qualified technician to restore the unit to normal operation;
e. When the product has been dropped or the cabinet has been damaged;
f. When the product exhibits a distinct change in performance, indicating a need for service.
- 4 -
Warranty
Standard Warranty
• Datavideo equipment are guaranteed against any manufacturing defects for one year from the date
of purchase.
• The original purchase invoice or other documentary evidence should be supplied at the time of any
request for repair under warranty.
• The product warranty period begins on the purchase date. If the purchase date is unknown, the
product warranty period begins on the thirtieth day after shipment from a Datavideo office.
• All non-Datavideo manufactured products (product without Datavideo logo) have only one year
warranty from the date of purchase.
• Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered under
warranty.
• Viruses and malware infections on the computer systems are not covered under warranty.
• Any errors that are caused by unauthorized third-party software installations, which are not required
by our computer systems, are not covered under warranty.
• All mail or transportation costs including insurance are at the expense of the owner.
• All other claims of any nature are not covered.
• All accessories including headphones, cables, and batteries are not covered under warranty.
• Warranty only valid in the country or region of purchase.
• Your statutory rights are not affected.
Three Year Warranty
• All Datavideo products purchased after July 1st, 2017 are qualified for a free two
years extension to the standard warranty, providing the product is registered with
Datavideo within 30 days of purchase.
• Certain parts with limited lifetime expectancy such as LCD panels, DVD drives,
Hard Drive, Solid State Drive, SD Card, USB Thumb Drive, Lighting, Camera module, PCIe Card are
covered for 1 year.
• The three-year warranty must be registered on Datavideo's official website or with your local
Datavideo office or one of its authorized distributors within 30 days of purchase.
- 5 -
Disposal
For EU Customers only - WEEE Marking
This symbol on the product or on its packaging indicates that this product must not be
disposed of with your other household waste. Instead, it is your responsibility to
dispose of your waste equipment by handing it over to a designated collection point for
the recycling of waste electrical and electronic equipment. The separate collection and
recycling of your waste equipment at the time of disposal will help to conserve natural
resources and ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste equipment for recycling,
please contact your local city office, your household waste disposal service or the shop where you
purchased the product.
CE Marking is the symbol as shown on the left of this page. The letters "CE" are the
abbreviation of French phrase "Conformité Européene" which literally means
"European Conformity". The term initially used was "EC Mark" and it was officially
replaced by "CE Marking" in the Directive 93/68/EEC in 1993. "CE Marking" is now used
in all EU official documents.
- 6 -
1. Product Overview
This CCU-100 kit is designed to easily connect several Datavideo products into an effective and professional
studio system. This guide assumes you may already own some or all of the other Datavideo products
mentioned in this document. Where an asterix symbol (*) is shown next to a model number, this product is
not supplied within the CCU-100 kit and an additional purchase may be required. Please speak with your
dealer to discuss your desired set up using the Datavideo equipment you may already have. For more
information on any of the products marked with an asterix (*) please visit our website www.datavideo.com
The CCU-100 kit can be used for passing on power to professional video cameras from the Datavideo PD-6*
power centre and handling signals sent over the camera cables (CB-43 / 44 / 45 / 49*) to a switcher. In this
way, it is used to remotely set up various camera parameters such as iris, shutter, gain, and master pedestal
using an MCU-200 (S/P/J)*.
As well as passing on camera control signals, the CCU-100 system simultaneously handles digital SDI and
analogue signals for camera video output, Program look back video, camera view finder data as well as tally
and intercom signals between the cameras and a video switcher.
The Datavideo AD-2 (S/P/J), Multi Transmission Adaptor Box, is an adaptor box that allows connections
between the CCU-100 Camera Control Unit and a single camera position. The CCU-100 and AD-2 (S/P/J)
form part of an integrated cabling solution that allows you to get things done fast, easy and within a budget.
1.1 Features
• Control up to 4 cameras from one CCU-100 Camera Control Unit using the supplied AD-2 (S/P/J)
units.
• Remote control of camera functions including Iris, shutter, gain, master pedestal etc
• HD/SD SDI video transmission from digital camera
• Transmission of view finder / monitor video signals
• Return look back video signal for camera operator
• Two-way intercom with camera operators using an ITC-100*
• Datavideo switcher tally support
• DC Power supply from 4-PIN XLR sources such as PD-6 Power Center*
• RJ-45 Port providing connection to MCU 100 (S/P/J) / 200 (S/P/J)* for Remote Control
Loading...