Datavideo AD-200 Main Unit, AD-200 Control Unit Instruction Manual

AD-200

AUDIO DELAY BOX WITH
LEVEL ADJUSTMENT

Instruction manual

- 2 -

Table of Contents

FCC COMPLIANCE STATEMENT ................................................................................................................................................ - 3 -

WARNINGS AND PRECAUTIONS .............................................................................................................................................. - 3 -

WARRANTY ............................................................................................................................................................................ - 4 -

STANDARD WARRANTY ...................................................................................................................................................................... - 4 -

THREE YEAR WARRANTY ................................................................................................................................................................... - 4 -

DISPOSAL................................................................................................................................................................................ - 4 -

D-SUB CABLE ..................................................................................................................................................................... - 5 -

CONNECTED CABLE ......................................................................................................................................................... - 5 -

MAIN UNIT (FRONT PANEL) ............................................................................................................................................................... - 6 -

MAIN UNIT (REAR PANEL) ................................................................................................................................................................. - 7 -

CONTROL UNIT (FRONT PANEL) .......................................................................................................................................................... - 8 -

CONTROL UNIT (REAR PANEL) ............................................................................................................................................................ - 9 -

AUX AUDIO INPUTS AND LEVELS ...................................................................................................................................................... - 10 -

ON-SCREEN DIS PL AY FUNCTION MENU .............................................................................................................................................. - 10 -

SPECIFICATIONS ............................................................................................................................................................. - 12 -

Disclaimer of Product & Services

The information offered in this instruc tion m anual is int ended as a guide onl y. At all times, Datavideo Technologies will
try to give correc t, complete and suitable inform ation. However, Datavideo Technologies cannot exclu de that some
information in this m anual, from time to time, may not be correct or m ay be incomplete. This manual may conta in
typing er rors, omissions or incorr ect information. Datavideo Technologies always recomm end that you double check
the information in this doc ument for accurac y before making any purchase decis ion or using the product. Datavid eo
Technologies is not respons ible for any omiss ions or errors, or f or any subsequent los s or damage cause d by using
the information contained within this manual. Further advice on the content of this manual or on the pro duct can be
obtained by contacting your local Datavideo Office or dealer.

- 3 -

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1). This device may not cause harmful interference, and
(2). This device must accept any interference received, including interference that may cause undesired

operation.

Warnings and Precautions

1. Read all of these warnings and save them for later reference.

2. Follow all warnings and instructions marked on this unit.

3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol

cleaners. Use a damp cloth for cleaning.

4. Do not use this unit in or near water.

5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage.

6. Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To ensure safe

and reliable operation of this unit, and to protect it from overheating, do not block or cover these
openings. Do not place this unit on a bed, sofa, rug, or similar surface, as the ventilation openings on
the bottom of the cabinet will be blocked. This unit should never be placed near or over a heat register
or radiator. This unit should not be placed in a built-in installation unless proper ventilation is provided.

7. This product should only be operated from the type of power source indicated on the marking label of

the AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your
local power company.

8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will be

walked on, rolled over, or otherwise stressed.

9. If an extension cord must be used with this unit, make sure that the total of the ampere ratings on the

products plugged into the extension cord do not exceed the extension cord rating.

10. Make sure that the total amperes of all the units that are plugged into a single wall outlet do not

exceed 15 amperes.

11. Never push objects of any kind into this unit through the cabinet ventilation slots, as they may touch

dangerous voltage points or short out parts that could result in risk of fire or electric shock. Never spill
liquid of any kind onto or into this unit.

12. Except as specifically explained elsewhere in this manual, do not attempt to service this product

yourself. Opening or removing covers that are marked “Do Not Remove” may expose you to dangerous
voltage points or other risks, and will void your warranty. Refer all service issues to qualified service
personnel.

13. Unplug this product from the wall outlet and refer to qualified service personnel under the following

conditions:

a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal operating conditions. Adjust only

those controls that are covered by the operating instructions in this manual; improper
adjustment of other controls may result in damage to the unit and may often require extensive
work by a qualified technician to restore the unit to normal operation;

e. When the product has been dropped or the cabinet has been damaged;
f. When the product exhibits a distinct change in performance, indicating a need for service.

- 4 -

Warranty

Standard Warranty

• Datavideo equipment are guaranteed against any manufacturing defects for one year from the date of

purchase.

• The original purchase invoice or other documentary evidence should be supplied at the time of any

request for repair under warranty.

• The product warranty period beings on the purchase date. If the purchase date is unknown, the

product warranty period begins on the thirtieth day after shipment from a Datavideo office.

• Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered under

warranty.

• Viruses and malware infections on the computer systems are not covered under warranty.

• Any errors that are caused by unauthorized third-party software installations, which are not required by

our computer systems, are not covered under warranty.

• All mail or transportation costs including insurance are at the expense of the owner.

• All other claims of any nature are not covered.

• Cables and batteries are not covered under warranty.

• Warranty only valid in the country or region of purchase.

• Your statutory rights are not affected.

Three Year Warranty

• All Datavideo products purchased after July 1st, 2017 are qualified for a free

two years extension to the standard warranty, providing the product is
registered with Datavideo within 30 days of purchase.

• Certain parts with limited lifetime expectancy such as LCD panels, DVD drives,

Hard Drive, Solid State Drive, SD Card, USB Thumb Drive, Lighting, Camera
module, PCIe Card are covered for 1 year.

• The three-year warranty must be registered on Datavideo's official website or with your local Datavideo

office or one of its authorized distributors within 30 days of purchase.

Disposal

For EU Customers only - WEEE Marking

This symbol on the product or on its packaging indicates that this product must not be
disposed of with your other household waste. Instead, it is your responsibility to
dispose of your waste equipment by handing it over to a designated collection point for
the recycling of waste electrical and electronic equipment. The separate collection and
recycling of your waste equipment at the time of disposal will help to conserve natural

resources and ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste equipment for recycling,
please contact your local city office, your household waste disposal service or the shop where you
purchased the product.

CE Marking is the symbol as shown on the left of this page. The letters "CE" are the
abbreviation of French phrase "Conformité Européene" which literally means "European
Conformity". The term initially used was "EC Mark" and it was officially replaced by "CE
Marking" in the Directive 93/68/EEC in 1993. "CE Marking" is now used in all EU official
documents.

- 5 -

Connection of AD-200 main unit and AD-200 control unit

AD-200 Main Unit

AD-200 Control Unit

D-Sub Cable

Connected Cable

D-SUB CABLE

Connected CABLE

- 6 -

Connections & Controls

Main Unit (Front Panel)

Connection

Use D-SUB Cable to connect AD-200 main unit to AD-200 control unit.

Audio Output
Audio input of control unit must be connected to audio output of main unit via a connected cable.

Grounding Terminal

When connecting this unit to any other component, make sure that it is properly grounded by
connecting this terminal to an appropriate point. When connecting, use the socket and be sure to
use wire with a cross-sectional area of at least 1.0 mm

2

.

- 7 -

Main Unit (Rear Panel)

Audio Output

RCA audio output & 4 XLR balanced audio output channels (You can use ch1,
2 audio out for XLR or RCA).

Audio input

RCA audio input & 4 XLR balanced audio input channels (You can use ch1, 2
audio input for XLR or RCA)

AUX Audio Input

2 channels of XLR balanced audio input.
For more information please see page 8 for more details.

RS-232 REMOTE

To be updated.

USB

Firmware Upgrades

DC IN Socket
Connect the supplied 12V PSU to this socket. The power connection can be

secured by screwing the outer fastening ring of the DC IN plug to the socket.

- 8 -

Control Unit (Front Panel)

Power Switch

Switches the power On / Off.

Headphone

Accepts a stereo mini jack plug for stereo headphones.

The headphone

volume is adjusted by rotating head phone volume control.

Headphone Volume Control

Controls Headphone volume level.
Use the Headphone section to accurately monitor any of the sources output.
Push this button to switch audio source 1~6 and audio output 1, 2.

Audio Input Source Level Controls

The AD-200 controls audio input channel (CH1~CH6).
This row of audio channe l selec t ion butt ons has b uilt -in O LED to show active

input channel. Lev el control for each audio input source is done by rotating
the knobs above each of the audio channel selection buttons.

(Level ranges from -80dB to +12dB)
The maximum audio level gain can be configured using the SET GAIN

function on OSD menu.

OLED Panel

Audio Meters & Function Display.

MENU Navigation Button

Rotate to change options and press in to select.
For more information please see the Menu Function.

Audio Output Source Level Controls

GROUP A = Control the CH1,2 output volume.
GROUP B = Control the CH3,4 output volume.

- 9 -

Control Unit (Rear Panel)

Connection

Use D-SUB Cable to connect AD-200 main unit to AD-200 control unit.

Audio Input

Audio input of control unit must be connected to audio output of main unit via a connected cable.

DC IN Socket
Connect the supplied 12V PSU to this socket. The power connection can be secured by screwing

the outer fastening ring of the DC In plug to the socket.

Note: AD-200 main unit and AD-200 control unit both have DC IN Socket, they are the same
function, you just need select one socket to supply the power input.

Grounding Terminal

When connecting this unit to any other component, make sure that it is properly grounded by
connecting this terminal to an appropriate point. When connecting, use the socket and be sure to
use wire with a cross-sectional area of at least 1.0 mm

2

.

- 10 -

AUX Audio Inputs and Levels

There are two types of switches for configuring AUDIO IN:

The LINE/MIC+40dB/MIC+60dB switch is used to set the AUDIO IN to LINE IN, MIC+40dB IN or MIC+60dB IN.
When LINE IN is selected, set the 48V switch to OFF in order to prevent da mage to the circuit due to ex cessive
current flow.

The 48V switch is designed specifically for phantom power control. To use MIC IN, set the
LINE/MIC+40dB/MIC+60dB switch to M IC IN. Turn the 48V switch to ON if a condenser microphone is used. Turn
the 48V switch to OFF if a dynamic microphone is used.

*NOTE: Always check the manual for the appropriate microphone and read the advice in the manual
regarding phantom power as some MICs have internal batteries too.

On-Screen Display Function Menu

1. MIXER I/O Configuration

The mixer has six input channels, which are mixed in different combinations. The mixed audio is subsequently sent to
the output channel. In the example illustrated below, the mixer setting is configured by enabling the desired audio
input channels and feeding the enabled combination to the corresponding output channel.

Description of the above configuration example:
Out1 is audio input CH1 only.
Out2 is audio input CH1~6 mixed.
Out3 is audio input CH2 only.
Out4 is tone mixed.

+ :

Enable

- :

Disable

1~6 :

Audio Input (CH1~6)

T :

Tone

OUT1~4 :

Audio Output (CH1~4)

Group 2

Group 1

CH1

CH2

CH3

CH4

CH5

CH6 1 2 3 4

T

Audio IN

Audio OUT

- 11 -

2. DELAY TIME

This function sets audio input delay time ranging from 0000~3000 mSEC.

3. TONE MODE

FQ.: This function sets TONE frequency of 1KHz, 6KHz or 12 KHz
LEL: This function sets TONE level ranging from -48~+24 dBu.

4. DISPLAY

BRI.: This function sets OLED panel brightness. There are five brightness levels with five filled square boxes being

the brightest and one filled square box being the least bright.

Brightest Least Bright
TEST: Different colours (Red, Green, Blue, Black and White) are available for testing OLED panel.
DIM: The OLED panel dims after the device is idle for 10 seconds. There are four dim levels with four filled square

boxes being no dim and one filled square box being the most dim.

No Dim Most Dim
RESET: This function resets all settings to factory default.

5. SET GAIN

This function sets the maximum audio level gain (0, 6 or 12 dB) for CH1-6, OUTA/B and MNTR knobs.

System Diagram

DIM = ■ - - -

BRI. =

■ - - - -

MAX GAIN

CH1: +00 dB
CH2: +06 dB
CH3: +12 dB

CH4: +00 dB

BRI. =

■■■■■

DIM = ■■■■

- 12 -

Specifications

AUX IN

Parameter Specification Limit Units Conditions/Comments

MIC/Line Connectors (CH5~CH6) 3Pin XLR Female NA NA Pin2=(+),Pin3=(-),Pin1=GND

Mic/Line Input Impedance(CH5/CH6) 2K/3K 10% Ω NA

Mic Gain Range +40dB /+60dB ±3 dB Slide switch

Line Gain Range off to +12 ±3 dB Audio source GAIN(knob)

THD+N 0.01 max % @1KHz,0dB(Lin IN)

Line in Max Level +23dBu ±3% dBu NA

Signal to noise ratio 80 min dB @1KHz,6dBu(Lin IN)

Frequency Response 20Hz~20KHz ±3 dB NA

AUDIO IN

Parameter

Specification

Limit

Units

Conditions/Comments

Input (CH1~CH4) Connectors 3Pin XLR Female NA NA Pin2=(+),Pin3=(-),Pin1=GND

Input Impedance 25K 10% Ω NA

Gain Range off to +12 ±3 dB Audio source GAIN(knob)

Signal to noise ratio 80 min dB @1KHz,6dBu

THD+N 0.01 max % @1KHz,0dB

Frequency Response 20Hz~20KHz ±3 dB NA

unbalanced mono audio (L, R) RCA NA NA NA

Signal to noise ratio 80 min dB @1KHz,0dB(RCA IN)

THD+N 0.01 max % @1KHz,0dB(RCA IN)

Impedance 15K 10% Ω NA

Audio Output

Parameter Specification Limit Units Conditions/Comments

Connector (1,2,3,4)(Group A,B) 3Pin XLR Male NA NA Pin2=(+),Pin3=(-),Pin1=GND

Impedance 65 5% Ω NA

Gain Range off to +12 ±3 dB OUTPUT (Group A.B)(knob)

Output Max Level +23dBu ±1.5% dBu NA

unbalanced mono audio (L, R) RCA NA NA NA

Gain Range off to +12 ±3 dB OUTPUT (Group A.B)(knob)

Impedance 330 5% Ω NA

Headphone

Parameter Specification Limit Units Conditions/Comments

Connector 3.5mm phone jack NA NA Tip(+),Ring=(-),Sleeve=GND

Signal to noise ratio 75 min dB @1KHz,0dB(Lin IN)

THD+N 0.01 max % @1KHz,0dB(Lin IN)

Frequency Response 20Hz~20KHz ±3 dB NA

- 13 -

Others

Parameter

Specification

Limit

Units

Conditions/Comments

Phantom Power +48V ±3% VDC NA

Power Consumption 12V/19W ±3% watts NA

Power Input connector 2pin DC Jack NA NA NA

Dimensions (Main Unit) 147 x 440 x 45.4 ±1% mm L X W X H

Dimensions (Control Unit) 90.5 x 440 x 47.5 ±1% mm L X W X H

Weight Main Unit 1. 8kg / Control Unit 1.1kg NA kg NA

Display 1,77" OLED NA NA 160XRGBX128

Audio Delay for audio input 0~3 sec NA NA NA

Operating and Storage temperature

Parameter

Specification

Operating temperature

0˚C ~ +50

˚

C

Storage temperature

0˚C ~ +60

˚

C

Certification

CE / FCC

AD-200 Main Unit

AD-200 Control Unit

DATAVIDEO WORLDWIDE OFFICES

Tel: [phone]
Fax:[phone]
E-mail:[e-mail]-mail: [e-mail]

China Shanghai

Datavideo Technologies China Co
601,Building 10,No.1228,
Rd.Jiangchang,
Jingan District,Shanghai
Tel: [phone]
Fax:+ 86 21-5603 6770
E-mail: [e-mail]

Singapore

Datavideo Visual Technology(S) Pte Ltd
No. 178 Paya Lebar Road #06-07
Singapore 409030

Tel: [phone]
Fa x:[phone]
E-mail:[e-mail]

Singapore

Datavideo Technologies Co. Lt d
10F. No. 176, Jian 1st Rd.,Chung Ho

District, New Taipei City 235, Taiwan

Tel: [phone]

Fax:[phone]
E-mail:service@dat avideo.com.tw

Taiwan

Datavideo Corporat ion
7048 Elmer Avenue.
Whittier, C A 90602,
U.S.A.

United States

Data video UK Lim ited
Brookfield House, Brookfield Industrial
Estate, Peakdale Road, Glossop,
Derbyshire, SK13 6LQ
Tel: [phone]
Fa x:+ 44-1457 850 964
E-mail: [e-mail] .uk

United Kingdom

Datavideo Technologies China Co

902, No. 1 business building,
Xiangtai Square, No. 129,
Yingxiongshan Road, Shizhong District,
Jinan City, Shandong Province, China

Tel: [phone]
E-mail: [e-mail]

China Jinan

Datavideo France s.a.r.l.
Cité Descartes 1, rue Albert Einstein
Champs sur Marne 774477 –
Marne la Vallée cedex 2
Tel: [phone]
Fa x:[phone]
E-mail: [e-mail]

France

Datavideo Hong K ong Ltd

G/ F.,26 Cross Lane
Wanchai, Hong Kong

Tel: [phone]
Fax:+ 852-2833-9916
E-mail: [e-mail]

Hong Kong

Datavideo India Noida

Fax:[phone]
E-mail: [e-mail]

Tel: [phone]

A-132, Sec-63,Noida-201307,
India

India Noida

Datavideo India Kochi

Tel: [phone]
Fax:[phone]

2nd Floor- North Wing, Govardhan Building,
Opp. NCC Group Headquaters, Chittoor Road,
Cochin- 682035

India Kochi

Data video Technologies Europe BV
Floridadreef 106
3565 AM Ut recht,
Th e Netherlands
Tel: [phone]
Fa x:+ 31-30-261-96-57
E-mail: info@data video.nl

Netherlands

China Beijing

Datavideo Technologies China Co
No. 812, Building B, Wankai Center,

No.316, Wan Feng Road, Fengtai District,
Beijing, China
Tel: [phone]
Fax:[phone]
E-mail: [e-mail]

Datavideo Technologies China Co
A1-2318-19 Room,No.8, Aojiang Road,
Taijiang District,Fuzhou,Fujian,China

Tel: [phone]
Fax:[phone]
E-mail: [e-mail]

China Fuzhou

Datavideo Technologies China Co
B-823,Meinian square,No.1388,
Middle of Tianfu Avenue,Gaoxin District,
Chengdu,Sichuan
Tel: [phone]
Fax:[phone]
E-mail: [e-mail]

China Chengdu

Data video Technologies (S) PTE L td
No. 178 Paya Lebar Road #06-03
Singapore 409030

Tel: [phone]
Fa x:[phone]
E-mail:s ales@data video.sg

It is our goal to make owning and using Datavideo products a satisfying experience. Our support sta󰀨 is available

to assist you to set up and operate your system. Contact your local office for specific support requests. Plus,
please visit www.datavideo.com to access our FAQ section.

All the trademarks are the properties of their respective owners. Datavideo Technologies Co., Ltd. All rights reserved 2018

Jul-11.2017

Service & Support

Please visit our website for latest manual update.

www.datavideo.com/product/AD-200