NACE Brands is the leading brand of satellite downlink products, cable headend systems,
• 24/7/365 Live Technical Service Support
fiber optics, wire, cable, and related connectivity products with integrators. With a global
presence in cable and satellite infrastructure products and multimedia technology systems,
NACE Brands is the brand of choice for the cable and satellite distribution industry.
Having been in business for over 25 years, NACE brands has become the partner of choice for
many integrators. Integrators choose NACE Brands because of our exceptional live technical
service, our industry leading sales and technical support, and our full portfolio of
complimentary product lines. We know that we can help you with any projects you have
because we have the people, the experience, and the products to be the integrator’s choice.
• Expertly Trained and Highly Knowledgeable Sales and Support Team
• Full Product Line of Cable and Satellite Infrastructure Products
• Customized Site-Survey Process to Ensure Project Success
Unpacking and Inspection ............................................................................................................................................... 8
Hardware Installations and Connections .................................................................................................................. 8
Connecting to the GUI Interface: ................................................................................................................................... 8
After connecting the device to the “Web Management” port located on the rear of the device and
connecting to a PC/Laptop. ................................................................................................................................................. 9
Enter Device's IP address in web browser to access the Overview Page. .................................................................. 9
Overview Page of DT-IPTV-QAM-ASI-4HC .............................................................................................................................. 9
System Parsing / Response Time: .............................................................................................................................................. 9
Encoder Programming and Setup via GUI Interface: ............................................................................................. 9
IP Streaming Setup ............................................................................................................................................. 11
Enabling IP Streams ....................................................................................................................................................................... 11
Disabling IP Streams ....................................................................................................................................................... 11
ASI Control: ........................................................................................................................................................................ 14
Management IP Setup: ................................................................................................................................................................... 14
Streaming IP Setup: ......................................................................................................................................................... 15
Reset to Default: ............................................................................................................................................................................... 15
Saving your configuration files .................................................................................................................................................. 15
The presence of this symbol: is to alert the installer and user to the presence of uninsulated dangerous
voltages within the product’s enclosure that may be of sufficient magnitude to produce a risk of electric
shock.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS DEVICE TO RAIN OR
MOISTURE. DO NOT OPEN THE UNIT. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
DO NOT apply power to the unit until all connections have been made, all components have been
installed and all wiring has been properly terminated.
DO NOT terminate, change or uninstall any wiring without first disconnecting the unit’s power
adapter from the device.
This device is supplied with the appropriately rated power supply. The use of any other power
supply could cause damage and invalidate the manufacturer’s warranty.
DO NOT connect the power cord to the device if the power cord is damaged.
DO NOT cut the power cord.
DO NOT plug the power cord into an AC outlet until all cables and connections to the device have
been properly connected.
The device should be installed in an environment consistent with its operating temperature
specifications. Placement next to heating devices and ducts is to be avoided as doing so may cause
damage. The device should not be placed in areas of high humidity.
DO NOT cover any of the device’s ventilation openings.
DO NOT cover or obstruct the device’s fan or fan openings.
If the device has been in a cold environment allow it to warm to room temperature for at least 2
hours before connecting to an AC outlet.
DT-IPTV-QAM-ASI-4HC | Manual V1.0 | 01152019
4
Package Contents
This package contains:
• DT-IPTV-QAM-ASI-4HC Encoder / Modulator
• One power cable
• Five Mini Din 10pin/6 RCA Cables
• Four HDMI Cables
• User Guide and Manual
Inspect the package before starting installation to ensure there is no damage and all supplied contents are present.
DT-IPTV-QAM-ASI-4HC | Manual V1.0 | 01152019
5
Product Description
The DT-IPTV-QAM-ASI-4HC Encoder/Modulator provides a dynamic independent DVB-C Annex B QAM output along
with 4 IP and ASI (MPTS) streams making it ideal for any commercial RF system. The high quality HD design allows for
watching action packed movies and sports channels on any HDTV. The DT-IPTV-QAM-ASI-4HC Encoder/Modulator is a
feature rich Digital Encoding platform allowing it to be deployed in a variety of installations. This space saving design
delivers up to 4 High Quality HD/SD QAM channels in a single 1RU space.
4 Frequency Independent QAM outputs (2 video programs per QAM-Typical*)
High resolution up to 1080i (MPEG-2) / 1080p (H.264)
Stream Type Single output (1 MPTS stream carrying up to 4 programs)
General
Password Protected GUI: Changeable
Consumption 34W typical
Dimension
*Subject to change without notifications
DT-IPTV-QAM-ASI-4HC | Manual V1.0 | 01152019
7
Device Programming and Setup:
Installation
System Installer must adhere to Article 820-40 of the NEC that provides guidelines for proper grounding and specifies
that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as
possible.
Unpacking and Inspection
Each unit is shipped factory tested. Ensure all items are removed from the container prior to discarding any packing material.
Thoroughly inspect the unit for shipping damage with particular attention to connectors and controls. If there is any sign of
damage to the unit or damaged or loose connectors contact your distributor immediately. Do not put the equipment into
service if there is any indication of defect or damage.
Hardware Installations and Connections
It is highly recommended that quality cables and connectors be used for all video and audio source connections.
• The unit is designed to be rack mounted in a standard EIA19” rack.
• The unit comes standard with HDMI and DIN inputs (Component and Composite video inputs). The DT-IPTV-QAM-
ASI-4HC encoder / modulator is intelligently designed to detect the video input from the video source. HDMI
Connection: Connect the HDMI cable(s) from the video source(s) into the HDMI input(s). Or, Connect the DIN Cable
to the back of the encoder as required using the DIN to DIN or DIN to breakout cable.
• Repeat this step for each video source connection required.
• Be sure the connections for each source are consistent with the unit’s inputs (IN1…IN4).
• Use a quality 75Ω coaxial cable with “F” connectors from the unit’s RF OUT jack to the distribution system (combiner
or reverse splitter) or directly to a television.
• Connect the included power cord to the unit’s POWER plug.
• Connect the power cord to an appropriately rated AC power outlet.
Connecting to the GUI Interface:
Factory Default IP: 192.168.1.9
1. Connect an Ethernet cable directly (no Cross Over cable required) to the Web Management Port on the rear panel of the
encoder or connect the Ethernet cable to an Ethernet switch. Connect an Ethernet Cable to your PC/Laptop.
2. Modify your PC/Laptop IP address to 192.168.1.11.
3. Enter ‘192.168.1.9’ into your web browser.
4. Enter GUI and make required device changes.
5. Save all changes as required, upload and reboot for changes to take effect.
6. Verify parameters then end web session.
DT-IPTV-QAM-ASI-4HC | Manual V1.0 | 01152019
8
Encoder Setup
After connecting the device to the “Web Management” port located on the rear of the device and connecting to a PC/Laptop.
Enter Device's IP address in web browser to access the Overview Page.
Overview Page of DT-IPTV-QAM-ASI-4HC
The Overview page of DT-IPTV-QAM-ASI-4HC shows inputs 1-4 system status including: Video Source parameter, Video
Output setting, Audio Output, Bitrate, and more.
The Overview page provides a quick snapshot of the DT-IPTV-QAM-ASI-4HC when fully functioning.
System Parsing / Response Time:
The initial System Parsing time will vary as the system identifies and populates the required parameters.
As the user navigates the device's menu note that a small delay may occur in populating the data on the screen as the system
is constantly performing system parsing and system upkeep functions.
Encoder Programming and Setup via GUI Interface:
Select the Encoder Setup Tab; you will then be prompted to enter the user name and password for device.
GUI Login Password:
Default User Name: admin
Default Password: Admin123
Note: To change the Password for the GUI go to the Administration Tab.
DT-IPTV-QAM-ASI-4HC |ManualV1.0 | 01152019
9
Encoder Setup Page of DT-IPTV-QAM-ASI-4HC
Encoder Setup page allows the integrator to select and set the parameters needed for each stream.
1. Select the “Edit” Icon:
2. Select and set the specific parameters settings as required.
Note: you can select and set all the parameters for all the encoders at one time.
3. After setting all the required parameters- Select the edit icon again.
Note: All changed parameters will be shown in red. Pictured Below.
DT-IPTV-QAM-ASI-4HC | Manual V1.0 | 01152019
10
4. Select “Active/Inactive” to activate for remaining parameters as required.
5. Select “Save and Confirm” to save all changed parameters.
6. Select “Apply” in the pop-up window.
IP Streaming Setup
Streaming Setup Page of DT-IPTV-QAM-ASI-4HC
Enabling IP Streams
1. Enable the Stream by selecting the check box 1-4.
Note: All streams can be enabled at the same time by using the “master” checkbox.
2. Enter the stream Destination IP [example: udp://224.1.1.4:1234].
3. Set the TTL value.
4. Select ‘Save and Confirm’ once all the streams are setup.
Disabling IP Streams
The DT-IPTV-QAM-ASI-4HC offers the user a SPTS output stream.
Each Stream can be disabled as required.
To disable an IP Stream “uncheck” the checkbox in front of the
appropriate IP Stream_ID (1-4).
DT-IPTV-QAM-ASI-4HC | Manual V1.0 | 01152019
11
RF Setup
Output Setup
Output Setup Page of DT-IPTV-QAM-ASI-4HC
Use the Output Setup Page to setup each RF Output.
The DT-IPTV-QAM-ASI-4HC offers the integrator the ability to set the output channel independently of the other output
channels of the DT-IPTV-QAM-ASI-4HC Encoder. This professional parameter allows the integrator greater flexibility for
placing video streams within the system. Each RF/QAM (2 streams per RF) can be allocated independently.
1. Select RF Output Setup from the menu.
2. Enable/Disable RF1-RF2 by checking or unchecking Checkbox (as required).
3. Modify the RF TSID (as required).
4. Select and Set RF Type.
5. Select and Set Channel Type.
6. Select and Set Ch/Freq required.
7. Select and Set Attenuation (if required).
8. Select and Set required Constellation.
9. Modify Interleaver (if required).
10. Modify ASI TS_ID (if required)
11. Select / Remove any ASI Program/Stream (as required).
12. Save and confirm all changes have been made.
DT-IPTV-QAM-ASI-4HC | Manual V1.0 | 01152019
12
CH # 54
CH# 120
CH# 104
CH#103
Note: The DT-IPTV-QAM-ASI-4HC allows the integrator the ability to set the output channels independently of the other 3
output channels.
Example 1: Example 1 shows RF1- RF2 with a large frequency separation.
(405.000 MHz)
(771.000 MHz)
Example 2: Example 2 shows RF1- RF2 with a small frequency separation.
(669.000 MHz)
(675.000 MHz)
Note: If the RF is disabled, the frequency will not be occupied.
- If a stream is disabled, the stream will occupy the channel frequency even if not present in the RF diagram.
DT-IPTV-QAM-ASI-4HC | Manual V1.0 | 01152019
13
ASI Control:
The DT-IPTV-QAM-ASI-4HC offers the integrator a MPTS ASI output stream.
1. Modify the ASI TS_ID as required.
2. Remove/Add ASI streams as required.
3. Select Save and Confirm to save all modified parameters.
Disable RF/QAM
The DT-IPTV-QAM-ASI-4HC offers the integrator the ability to disable a RF QAM.
To disable a RF (QAM) output, “uncheck” the checkbox associated with the RF QAM.
Application Notes
When installing more than 1 device into a system, each device must have a unique RF TS_ID and ASI TS_ID.
We highly recommend you save your encoder configuration files.
Note: See Administration tab for how to backup device settings.
Network Configuration
Management IP Setup:
Network Setup Page of DT-IPTV-QAM-ASI-4HC
Use the Network Setup to configure the device’s Management Port’s IP address (GUI address) of the device, Subnet Mask,
Gateway, Enable/Disable DHCP, and set Host Name.
Save and Confirm: Once all parameters are set remember to Save and confirm all changes.
DT-IPTV-QAM-ASI-4HC | Manual V1.0 | 01152019
14
Streaming IP Setup:
Use the Streaming IP tab to modify the Streaming IP port of the device as required.
Save and Confirm: Once all parameters are set remember to Save and confirm all changes have been made.
Administration
Administration Setup Page of DT-IPTV-QAM-ASI-4HC
Reboot Device:
Use the Reboot command button to reboot the device.
Note: Any unsaved changes will be lost.
Reset to Default:
Use the Reset to Default button to reset all parameters to original factory settings.
Saving your configuration files
We highly recommend you save your configuration files. Simply select the “Backup” button and the
configuration files will be saved to your computer.
Backup:
We highly recommend saving your device’s setting.
1. Select Administration.
2. Select Backup from the menu.
3. Locate and name file for future use.
DT-IPTV-QAM-ASI-4HC | Manual V1.0 | 01152019
15
Restore/Upload saved file configurations:
1. Select Administration.
2. Select “Choose file” menu.
3. Locate the required file to be imported.
4. Select“Upload” to import the selected file into the device.
5. Remember to save and backup any and all changes.
Change Password:
Use the Change Password section to change or modify the device’s password as desired.
Save and Confirm new password.
Private Address Ranges, IPv4
Private IPv4 addresses are addresses set aside by the IANA (Internet Assigned Numbers Authority) for use within networks
that will not directly communicate or not be seen by the internet. These private addresses cannot be used on the Internet or be
used to communicate with the Internet. ISP’s filter out and delete packets using private IP addresses. Any organization that
uses private IP addresses on devices that communicate with the internet must use a device that performs Network Address
Translation.
Anyone can use private addresses and they are not required to seek permission to use them. Again, networks using private IP
addresses cannot communicate directly with the internet.
There are three blocks of addresses that are set aside by IANA for use in private internets and are not publicly routable on the
global internet:
Private Class A Range: 10.0.0.0 - 10.255.255.255
Private Class B Range: 172.16.0.0 - 172.31.255.255
Private Class C Range: 192.168.0.0 - 192.168.255.255
It is important to note that only some of the 172.xx.xx.xx and the 192.xx.xx.xx address ranges are designated for private use.
The remaining addresses are public and can be routable via the global Internet.
More information regarding private addresses can be found at http://www.iana.org and https://www.arin.net
DT-IPTV-QAM-ASI-4HC | Manual V1.0 | 01152019
16
Product Notes:
Warranty
DATATRONIX 1-Year Limited Warranty
DATATRONIX. (the "Company") warrants to the Original Purchaser that the item purchased is free from defects in
workmanship or material under normal use. This warranty starts on the date of shipment of the hardware to the Original
Purchaser.
During the warranty period, the Company agrees to repair or replace, at its sole option, without charge to Original Purchaser,
any defective component. To obtain service, the Original Purchaser must return the item to the Company properly packaged
for shipping. All defective products must be returned to the Company within thirty (30) days of failure. Products must be
returned with a description of the failure and Return Merchandise Authorization (RMA) number supplied by the Company.
To receive a RMA number and a return shipping address on where to deliver the hardware, call 610-429-1821. The shipping,
and insurance charges incurred in shipping to the Company will be paid by Original Purchaser, and all risk for the hardware
shall remain with the Original Purchaser until such time as Company takes receipt of the hardware. Upon receipt, the
Company will promptly repair or replace the defective unit, and then return said unit to Original Purchaser, shipping prepaid.
The Company may use reconditioned or like-new parts or units, at its sole option, when repairing any hardware. Repaired
products shall carry the same amount of outstanding warranty as from original purchase. Any claim under the warranty must
include dated proof of purchase or invoice. In any event, the Company's liability for defective hardware is limited to repairing
or replacing the hardware.
This warranty is contingent upon proper use of the hardware by Original Purchaser and does not cover: if damage is due to
Acts of God (including fire, flood, earthquake, storm, hurricane or other natural disaster), accident, unusual physical,
electrical, or electromechanical stress, modifications, neglect, misuse, operation with media not approved by the Company,
tampering with or altering of the hardware, riot, war, invasion, act of foreign enemies, hostilities (regardless of whether war is
declared), civil war, rebellion, revolution, insurrection, military or usurped power or confiscation, terrorist activities,
nationalization, government sanction, blockage, embargo, labor dispute, strike, lockout or interruption or failure of electricity,
air conditioning, or humidity control, internet, network, or telephone service
The warranties given herein, together with any implied warranties covering the hardware, including any warranties of
merchantability or fitness for a particular purpose, are limited in duration to one year from the date of shipment to the
Original Purchaser. Jurisdictions vary with regard to the enforceability of warranty limitations, and you should check the laws
of your local jurisdiction to find out whether the above limitation applies to you.
The Company shall not be liable to your for loss of data, loss of profits, lost savings, special, incidental, consequential,
indirect, or other similar damages arising from breach of warranty, breach of contract, negligence, or other legal action even
if the Company or its agent has been advised of the possibility of such damages, or for any claim brought against your by
another party. Jurisdictions vary with regard to the enforceability of provisions excluding or limiting liability for incidental or
consequential damages. You should check the laws of your local jurisdiction to find out whether the above exclusion applies
to you.
This warranty allocates risks of product failure between Original Purchaser and the Company. The Company's hardware
pricing reflects this allocation of risk and the limitations of liability contained in this warranty. The warranty set forth above
is in lieu of all other express warranties, whether oral or written. The agents, employees, distributors, and dealers of the
Company are not authorized to make modification to this warranty, or additional warranties binding on the Company.
Accordingly, additional statements such as dealer advertising or presentations, whether oral or written, do not constitute
warranties by the Company and should not be relied upon.
This warranty gives you specific legal rights. You may also have other rights which vary from one jurisdiction to another.
DT-IPTV-QAM-ASI-4HC | Manual V1.0 | 01152019
17
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.