Datasheets LMx39 Datasheet

LM139, LM139A, LM239, LM239A,

LM339, LM339A, LM339Y, LM2901

QUAD DIFFERENTIAL COMPARATORS

SLCS006E – OCTOBER 1979 – REVISED MA Y 2000

D

Single Supply or Dual Supplies

D

Wide Range of Supply Voltage

...2 V to 36 V

D

Low Supply-Current Drain Independent of
Supply Voltage . . . 0.8 mA Typ

D

Low Input Bias Current . . . 25 nA Typ

D

Low Input Offset Current ...3 nA Typ
(LM139)

D

Low Input Offset Voltage ...2 mV Typ

D

Common-Mode Input Voltage Range
Includes Ground

D

Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage . . . ±36 V

D

Low Output Saturation Voltage

D

Output Compatible With TTL, MOS, and
CMOS

D

Package Options Include Plastic
Small-Outline (D, NS), Shrink Small-Outline
(DB), Thin Shrink Small-Outline (PW), and
Ceramic Dual Flatpack (W) Packages,
Ceramic Chip Carriers (FK), and Standard
Plastic (N) and Ceramic (J) DIPs

description

D, DB, J, N, NS, PW, OR W PACKAGE

V

CC

NC

2IN–

NC

2IN+

NC – No internal connection

(TOP VIEW)

1OUT
2OUT

V

CC

2IN–
2IN+
1IN–
1IN+

FK PACKAGE

(TOP VIEW)

3212019

4
5
6
7
8

910111213

1
2
3
4
5
6
7

2OUT

1OUT

1IN–

1IN+

14
13
12
11
10

NC

NC

9
8

3OUT

3IN–

OUT3
OUT4
GND
4IN+
4IN–
3IN+
3IN–

4OUT

18
17
16
15
14

3IN+

GND
NC
4IN+
NC
4IN–

These devices consist of four independent voltage comparators that are designed to operate from a single
power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the
difference between the two supplies is 2 V to 36 V and VCC is at least 1.5 V more positive than the input
common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to
other open-collector outputs to achieve wire-AND relationships.

The LM139 and LM139A are characterized for operation over the full military temperature range of –55°C
to 125°C. The LM239 and LM239A are characterized for operation from –25°C to 125°C. The LM339 and
LM339A are characterized for operation from 0°C to 70°C. The LM2901 is characterized for operation from
–40°C to 125°C.

symbol (each comparator)

IN+

OUT

IN–

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Copyright  2000, Texas Instruments Incorporated

On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.

1

LM139, LM139A, LM239, LM239A,

25°C to 85°C

55°C to 125°C

LM339, LM339A, LM339Y, LM2901
QUAD DIFFERENTIAL COMPARATORS

SLCS006E – OCTOBER 1979 – REVISED MA Y 2000

AVAILABLE OPTIONS

PACKAGED DEVICES

T

A

0°C to 70°C

°

–

–40°C to 125°C

°

–

†

The D and NS packages are available taped and reeled. Add the suffix R to the device type (e.g., LM339DR).

‡

The DB and PW packages are only available taped and reeled.

VIOmax

at 25°C

5 mV
5 mV
2 mV
2 mV

°

5 mV LM239D LM239N
2 mV LM239AD

7 mV
7 mV

5 mV LM139D LM139FK LM139J LM139W

°

2 mV LM139AD

PLASTIC

SOIC

†

(D, NS)

LM339D
LM339NS
LM339AD

LM339ANS

LM2901D

LM2901NS

PLASTIC

SSOP
(DB)

LM339DBR

—
—
—

— — —

LM2901DBR — — LM2901N LM2901PWR —

—

schematic (each comparator)

CERAMIC

CHIP

CARRIER

‡

(FK)

— —

LM139AFK LM139AJ

CERAMIC

DIP

(J)

PLASTIC

DIP

(N)

LM339N

—

LM339AN

—

LM239AN

— —

PLASTIC

TSSOP

‡

(PW)

LM339PWR

—
—
—

— —

CERAMIC

DUAL

FLATPACK

(W)

—

LM139AW

IN+

IN–

All current values shown are nominal.

10 µA

80-µA

Current

Regulator

60 µA

10 µA

80 µA

V

CC

OUT

GND

2

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

LM139, LM139A, LM239, LM239A,

LM339, LM339A, LM339Y, LM2901

QUAD DIFFERENTIAL COMPARATORS

SLCS006E – OCTOBER 1979 – REVISED MA Y 2000

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage, VCC (see Note 1) 36 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Differential input voltage, VID (see Note 2) ±36 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage range, VI (either input) –0.3 V to 36 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output voltage, V

Output current, IO 20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Duration of output short circuit to ground (see Note 3) Unlimited. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance, θJA (see Note 4): D package 86°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous total dissipation See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Case temperature for 60 seconds: FK package 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, DB, N, or PW package 260°C. . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J package 300°C. . . . . . . . . . . . . . . . . . . . .

Storage temperature range, T

†

Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES: 1. All voltage values, except differential voltages, are with respect to network ground.

2. Differential voltages are at IN+ with respect to IN–.

3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction.

4. The package thermal impedance is calculated in accordance with JESD 51.

36 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

O

DB package 96°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

N package 80°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

NS package 76°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PW package 113°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

stg

†

DISSIPATION RATING TABLE

PACKAGE

FK 900 mW 11 mW/°C 68°C 880 mW 715 mW 275 mW

J 900 mW 11 mW/°C 68°C 880 mW 715 mW 275 mW

TA ≤ 25°C

POWER RATING

DERATING

FACTOR

DERATE

ABOVE T

TA = 70°C

POWER RATING

A

TA = 85°C

POWER RATING

POWER RATING

TA = 125°C

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

3

LM139, LM139A, LM239, LM239A,

PARAMETER

TEST CONDITIONS

†

T

‡

UNIT

VIOInput offset voltage

V

IC

V

ICR

(min)

mV

IIOInput offset current

V

V

nA

IIBInput bias current

V

V

nA

V

V

I

g

V

V

V

V

1 V

I

4 mA

mV

Response time

L

g

s

LM339, LM339A, LM339Y, LM2901
QUAD DIFFERENTIAL COMPARATORS

SLCS006E – OCTOBER 1979 – REVISED MA Y 2000

electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)

A

VCC = 5 V to 30 V,

p

p

p

Common-mode

ICR

input-voltage range

Large-signal

VD

OH

OL

OL

CC

differential-voltage
amplification

High-level output
current

Low-level output
voltage

Low-level output
current

Supply current
(four comparators)

A

I

I

†

All characteristics are measured with zero common-mode input voltage unless otherwise specified.

‡

Full range (MIN to MAX) for LM139 and LM139A is –55°C to 125°C. All characteristics are measured with zero common-mode input voltage
unless otherwise specified.

=

VO = 1.4 V

= 1.4

O

= 1.4

O

VCC± = ±7.5 V,
VO = –5 V to 5 V

= 1

ID

= –

ID

VID = –1 V, VOL = 1.5 V 25°C 6 16 6 16 mA

VO = 2.5 V, No load 25°C 0.8 2 0.8 2 mA

,

VOH = 5 V 25°C 0.1 0.1
VOH = 30 V Full range 1 1

,

=

OL

25°C

Full range 9 4

25°C 3 25 3 25

Full range 100 100

25°C –25 –100 –25 –100

Full range –300 –300

25°C

Full range

25°C 200 50 200 V/mV

25°C 150 400 150 400

Full range 700 700

LM139 LM139A

MIN TYP MAX MIN TYP MAX

2 5 1 2

0 to

VCC–1.5

0 to

VCC–2

0 to

VCC–1.5

0 to

VCC–2

nA
µA

switching characteristics, VCC = 5 V, TA = 25°C

LM139

PARAMETER TEST CONDITIONS

p

§

CL includes probe and jig capacitance.

NOTE 5: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.

RL connected to 5 V through 5.1 kΩ,
CL = 15 pF§, See Note 5

100-mV input step with 5-mV overdrive 1.3
TTL-level input step 0.3

LM139A

MIN TYP MAX

UNIT

µ

4

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

†

‡

A

VIOInput offset voltage

V

IC

V

ICR

(min)

mV

IIOInput offset current

V

V

nA

IIBInput bias current

V

V

nA

V

V

I

g

V

V

V

V

1 V

I

4 mA

mV

Supply current

Response time

L

g

s

LM139, LM139A, LM239, LM239A,

LM339, LM339A, LM339Y, LM2901

QUAD DIFFERENTIAL COMPARATORS

SLCS006E – OCTOBER 1979 – REVISED MA Y 2000

electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)

LM239

PARAMETER

p

p

p

Common-mode

ICR

input-voltage range

Large-signal

A

OH

I

OL

I

CC

†

All characteristics are measured with zero common-mode input voltage unless otherwise specified.

‡

Full range (MIN to MAX) for LM239 and LM239A is –25°C to 85°C, for LM339 and LM339A is 0°C to 70°C. All characteristics are measured with
zero common-mode input voltage unless otherwise specified.

differential-voltage

VD

amplification
High-level output

current
Low-level output

OL

voltage
Low-level output

current

(four comparators)

pp

TEST CONDITIONS

VCC = 5 V to 30 V,

=

VO = 1.4 V

= 1.4

O

= 1.4

O

VCC = 15 V,
VO = 1.4 V to 11.4 V,
RL ≥ 15 kΩ to V

= 1

ID

= –

ID

VID = –1 V, VOL = 1.5 V 25°C 6 16 6 16 mA
VO = 2.5 V, No load 0.8 2 0.8 2

VCC = 30 V,
No load

,

CC

VOH = 5 V 25°C 0.1 50 0.1 50
VOH = 30 V Full range 1 1

,

=

OL

VO = 2.5 V,

T

25°C

Full range 9 4

25°C 5 50 5 50

Full range 150 150

25°C –25 –250 –25 –250

Full range –400 –400

25°C

Full range

25°C 50 200 50 200 V/mV

25°C 150 400 150 400

Full range 700 700

25°C mA

LM339

MIN TYP MAX MIN TYP MAX

2 5 1 3

0 to

VCC–1.5

0 to

VCC–2

0 to

VCC–1.5

0 to

VCC–2

LM239A
LM339A

UNIT

nA
µA

switching characteristics, VCC = 5 V, TA = 25°C

LM239, LM239A,

PARAMETER TEST CONDITIONS

p

§

CL includes probe and jig capacitance.

NOTE 5: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.

RL connected to 5 V through 5.1 kΩ,
CL = 15 pF§, See Note 5

100-mV input step with 5-mV overdrive 1.3
TTL-level input step 0.3

LM339, LM339A

MIN TYP MAX

UNIT

µ

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

5

LM139, LM139A, LM239, LM239A,

PARAMETER

TEST CONDITIONS

†

T

‡

UNIT

VIOInput offset voltage

V

IC

V

ICR

(min)

mV

IIOInput offset current

V

V

nA

IIBInput bias current

V

V

nA

V

g

V

IOHHigh-level output current

V

V

VOLLow-level output voltage

V

1 V

I

4 mA

mV

Supply current

PARAMETER

TEST CONDITIONS

UNIT

Response time

L

g

s

LM339, LM339A, LM339Y, LM2901
QUAD DIFFERENTIAL COMPARATORS

SLCS006E – OCTOBER 1979 – REVISED MA Y 2000

electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)

A

VCC = 5 V to 30 V,

p

p

p

Common-mode input-voltage

ICR

range

A

I

I

†

All characteristics are measured with zero common-mode input voltage unless otherwise specified.

‡

Full range (MIN to MAX) for LM2901 is –40°C to 125°C. All characteristics are measured with zero common-mode input voltage unless otherwise
specified.

Large-signal differential-voltage

VD

amplification

p

p

Low-level output current VID = –1 V, VOL = 1.5 V 25°C 6 16 mA

OL

CC

pp

(four comparators)

=

VO = 1.4 V

= 1.4

O

= 1.4

O

VCC = 15 V,
VO = 1.4 V to 11.4 V,
RL ≥ 15 kΩ to V

= 1

ID

= –

ID

VO = 2.5 V, No load 0.8 2
VCC = 30 V,

No load

,

CC

VOH = 5 V 25°C 0.1 50
VOH = 30 V Full range 1

,

=

OL

VO = 2.5 V,

25°C

Full range 15

25°C 5 50

Full range 200

25°C –25 –250

Full range –500

25°C

Full range

25°C 25 100 V/mV

25°C 150 500

Full range 700

25°C

LM2901

MIN TYP MAX

2 7

0 to

VCC–1.5

0 to

VCC–2

1 2.5

nA
µA

mA

switching characteristics, VCC = 5 V, TA = 25°C

LM2901

MIN TYP MAX

p

§

CL includes probe and jig capacitance.

NOTE 5: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.

RL connected to 5 V through 5.1 kΩ,
CL = 15 pF§, See Note 5

100-mV input step with 5-mV overdrive 1.3
TTL-level input step 0.3

µ

6

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

PARAMETER

TEST CONDITIONS

†

UNIT

PARAMETER

TEST CONDITIONS

UNIT

Response time

L

g

s

LM139, LM139A, LM239, LM239A,

LM339, LM339A, LM339Y, LM2901

QUAD DIFFERENTIAL COMPARATORS

SLCS006E – OCTOBER 1979 – REVISED MA Y 2000

electrical characteristics at VCC = 5 V, TA = 25°C (unless otherwise noted)

V
I

IO

I

IB

V

A
I

OH

V
I

OL

I

CC

†

All characteristics are measured with zero common-mode input voltage unless otherwise specified.

Input offset voltage

IO

Input offset current VO = 1.4 V 5 50 nA
Input bias current VO = 1.4 V –25 –250 nA

Common-mode input-voltage range

ICR

Large-signal differential-voltage amplification

VD

High-level output current VID = 1 V, VOH = 5 V 0.1 50 nA
Low-level output voltage VID = –1 V, IOL = 4 mA 150 400 mV

OL

Low-level output current VID = –1 V, VOL = 1.5 V 6 16 mA

Supply current (four comparators)

VCC = 5 V to 30 V,
VO = 1.4 V

VCC = 15 V,
RL ≥ 15 kΩ to V

VO = 2.5 V, No load 0.8 2
VO = 30 V,

No load

VIC = V

VO = 1.4 V to 11.4 V,

CC

VO = 15 V,

ICR

(min),

VCC–1.5

LM339Y

MIN TYP MAX

2 5 mV

0 to

25 100 V/mV

1 2.5

V

mA

switching characteristics, VCC = 5 V, TA = 25°C

LM339Y

MIN TYP MAX

p

‡

CL includes probe and jig capacitance.

NOTE 5: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.

RL connected to 5 V through 5.1 kΩ,
CL = 15 pF‡, See Note 5

100-mV input step with 5-mV overdrive 1.3
TTL-level input step 0.3

µ

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

7

IMPORTANT NOTICE

T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those
pertaining to warranty, patent infringement, and limitation of liability.

TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty . Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.

Customers are responsible for their applications using TI components.
In order to minimize risks associated with the customer’s applications, adequate design and operating

safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent

that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.

Copyright  2000, Texas Instruments Incorporated