Page 1
ZTX749A
PNP Low Saturation Transistor
• This device are designed with high current gain and low saturation
voltage with collector currents up to 2A continuous.
ZTX749A
Absolute Maximum Ratings
TA=25°C unless otherwise noted
C
B
E
TO-226
Symbol Parameter Value Units
V
CEO
V
CBO
V
EBO
I
C
T
, T
J
STG
* These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES:
1. These ratings are based on a maximum junction temperature of 150°C.
2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
Electrical Characteristics
Collector-Emitter Voltage -35 V
Collector-Base Voltage -45 V
Emitter-Base Voltage -5 V
Collector Current - Continuous -2 A
Operating and Storage Junction Temperature Range -55 ~ +150 °C
TA=25°C unless otherwise noted
Symbol Parameter Test Condition Min. Max. Units
Off Characteristics
BV
BV
BV
I
CBO
I
EBO
CEO
CBO
EBO
Collector-Emitter Breakdown Voltage IC = -10mA -35 V
Collector-Base Breakdown Voltage IC = -100µA-45V
Emitter-Base Breakdown Voltage IE = -100µA-5V
Collector Cutoff Current VCB = -30V
= -30V, TA = 100°C
V
CB
-100
-10
Emitter Cutoff Current VEB = -4V -100 nA
On Characteristics*
h
FE
(sat) Collector-Emitter Saturation Voltage IC = -1A, IB = -100mA
V
CE
V
(sat) Base-Emitter Saturation Voltage IC = -1A, IB = -100mA -1.25 V
BE
V
(on) Base-Emitter On Voltage IC = -1A, VCE = -2V -1 V
BE
DC Current Gain IC = -50mA, VCE = -2V
= -1A, VCE = -2V
I
C
I
= -2A, VCE = -2V
C
= -6A, VCE = -2V
I
C
= -2A, IB = -200mA
I
C
70
100
75
15
300
-300
-500
Small-Signal Characteristics
C
obo
f
T
Output Capacitance VCB = -10V, IE = 0, f = 1MHz 100
Transition Frequency IC = -100mA, VCE = -5V
100
f = 100MHz
* Pulse Test: Pulse Width ≤ 300µs, Duty Cycle ≤ 2%
nA
µA
mV
P
F
Thermal Characteristics
TA=25°C unless otherwise noted
Symbol Parameter Max. Units
P
D
R
θJA
©2003 Fairchild Semiconductor Corporation Rev. C, August 2003
Total Device Dissipation 1 W
Thermal Resistance, Junction to Ambient 125 °C/W
Page 2
Package Dimensions
ZTX749A
TO-226
S7.87-7.37;
S15.61-14.47;
S0.51-0.36;
S0.76-
0.36;
S4.70-4.32;
S4.45-3.81;
1
S1.40-1.14;
S1.40-1.14;
32
5" TYP
S1.65-1.27;
0.51
S1.52-1.02;
2" TYP
2" TYP
S0.48-0.30;
99 95
PIN
1EE
2BC
3CB
TO-226AE (95,99)
S7.73-7.10;
S2.41-2.13;
For leadformed option ordering,
refer to Tape & Reel data information.
Dimensions in Millimeters
©2003 Fairchild Semiconductor Corporation Rev. C, August 2003
Page 3
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.
ACEx™
ActiveArray™
Bottomless™
CoolFET™
CROSSVOLT™
DOME™
EcoSPARK™
2
CMOS™
E
EnSigna™
FACT™
FACT Quiet Series™
®
FAST
FASTr™
FRFET™
GlobalOptoisolator™
GTO™
HiSeC™
2
C™
I
Across the board. Around the world.™
The Power Franchise™
Programmable Active Droop™
ImpliedDisconnect™
ISOPLANAR™
LittleFET™
MicroFET™
MicroPak™
MICROWIRE™
MSX™
MSXPro™
OCX™
OCXPro™
OPTOLOGIC
®
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerTrench
QFET
®
®
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
SILENT SWITCHER
SMART START™
SPM™
Stealth™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TinyLogic
TruTranslation™
UHC™
UltraFET
®
VCX™
®
®
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR
CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, or (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to
result in significant injury to the user.
2. A critical component is any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative or In
Design
Preliminary First Production This datasheet contains preliminary data, and
No Identification Needed Full Production This datasheet contains final specifications. Fairchild
Obsolete Not In Production This datasheet contains specifications on a product
©2003 Fairchild Semiconductor Corporation Rev. I3
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Loading...