Datasheet VS-15ETL06PbF, VS-15ETL06FPPbF DataSheet (Vishay)

Ultralow VF Hyperfast Rectifier for

TO-220AC TO-220 FULL-PAK

Anode

1

3

Cathode

Base

cathode

2

Anode

1

3

Cathode

VS-15ETL06PbF VS-15ETL06FPPbF

Discontinuous Mode PFC, 15 A FRED Pt

PRODUCT SUMMARY

Package TO-220AC, TO-220FP

I

F(AV)

V

R

V

at I

F

F

t

typ. 60 ns

rr

max. 175 °C

T

J

Diode variation Single die

15 A

600 V

1.05 V

VS-15ETL06PbF, VS-15ETL06FPPbF

Vishay Semiconductors

®

FEATURES

• Hyperfast recovery time

• Benchmark ultralow forward voltage drop

• 175 °C operating junction temperature

• Low leakage current

• Fully isolated package (V

• UL E78996 pending

• Designed and qualified for industrial level

• Compliant to RoHS Directive 2002/95/EC

DESCRIPTION

State of the art, ultralow VF, soft-switching hyperfast
rectifiers optimized for Discontinuous (Critical) Mode (DCM)
Power Factor Correction (PFC).
The minimized conduction loss, optimized stored charge
and low recovery current minimize the switching losses and
reduce over dissipation in the switching element and
snubbers.
The device is also intended for use as a freewheeling diode
in power supplies and other power switching applications.

APPLICATIONS

AC/DC SMPS 70 W to 400 W
e.g. laptop and printer AC adaptors, desktop PC, TV and
monitor, games units and DVD AC/DC power supplies.

= 2500 V

INS

RMS

)

ABSOLUTE MAXIMUM RATINGS

PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS

Peak repetitive reverse voltage V

Average rectified forward current I

Non-repetitive peak surge current I

Peak repetitive forward current I

Operating junction and storage temperatures T

ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified)

PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS

Breakdown voltage,
blocking voltage

Forward voltage V

Reverse leakage current I

Junction capacitance C

Series inductance L

Document Number: 94004 For technical questions within your region, please contact one of the following: www.vishay.com
Revision: 31-Mar-11 [email protected]

THE PRODUCTS DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

RRM

F(AV)

FSM

FM

, T

J

,

V

BR

V

R

IR = 100 μA 600 - -

R

IF = 15 A - 0.99 1.05

F

T

S

= 15 A, TJ = 150 °C - 0.85 0.92

I

F

VR = VR rated - 0.1 10

T

= 150 °C, VR = VR rated - 15 120

J

VR = 600 V - 20 - pF

Measured lead to lead 5 mm from package body - 8.0 - nH

, [email protected], [email protected] 1

This document is subject to change without notice.

TC = 154 °C

T

= 120 °C (FULL-PAK)

C

TJ = 25 °C 250

Stg

600 V

15

A

30

- 65 to 175 °C

V

μA

www.vishay.com/doc?91000

VS-15ETL06PbF, VS-15ETL06FPPbF

100

10

1

0.4 0.6 0.8 1.0 1.2 1.6

I

F

- Instantaneous Forward

Current (A)

VFM - Forward Voltage Drop (V)

TJ = 175 °C
T

J

= 150 °C

T

J

= 25 °C

1.4

Vishay Semiconductors

Ultralow VF Hyperfast Rectifier for

Discontinuous Mode PFC, 15 A FRED Pt

®

DYNAMIC RECOVERY CHARACTERISTICS (TC = 25 °C unless otherwise specified)

PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS

IF = 1 A, dIF/dt = 100 A/μs, VR = 30 V - 60 120

= 15 A, dIF/dt = 100 A/μs, VR = 30 V - 190 270

I

Reverse recovery time t

Peak recovery current I

Reverse recovery charge Q

rr

RRM

rr

F

T

= 25 °C

J

= 125 °C - 320 -

T

J

TJ = 25 °C - 19 -

T

= 125 °C - 26 -

J

TJ = 25 °C - 2.2 -

T

= 125 °C - 4.3 -

J

I

= 15 A

F

/dt = 200 A/μs

dI

F

= 390 V

V

R

- 220 -

THERMAL - MECHANICAL SPECIFICATIONS

PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS

Maximum junction and storage
temperature range

Thermal resistance,
junction to case

Thermal resistance,
junction to ambient per leg

Thermal resistance,
case to heatsink

Weight

Mounting torque

Marking device

(FULL-PAK) - 3.0 3.5

T

, T

J

Stg

R

thJC

R

Typical socket mount - - 70

thJA

R

thCS

Mounting surface, flat, smooth
and greased

- 65 - 175 °C

-1.01.3

-0.5-

-2.0- g

-0.07- oz.

6.0

(5.0)

Case style TO-220AC 15ETL06

Case style TO-220AC FULL-PAK 15ETL06FP

-

12

(10)

kgf · cm

(lbf · in)

ns

A

μC

°C/W

Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs.

www.vishay.com For technical questions within your region, please contact one of the following: Document Number: 94004
2 [email protected]

THE PRODUCTS DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

100

10

1

0.1

- Reverse Current (µA)

0.01

R

I

0.001

0 100 200 300 400 500 600

, [email protected], [email protected] Revision: 31-Mar-11

This document is subject to change without notice.

TJ = 175 °C

TJ = 150 °C

T

= 125 °C

J

TJ = 100 °C

TJ = 75 °C

TJ = 50 °C

TJ = 25 °C

VR - Reverse Voltage (V)

Reverse Voltage

www.vishay.com/doc?91000

VS-15ETL06PbF, VS-15ETL06FPPbF

100

10

0 100 200 300 400 500 600

C

T

- Junction Capacitance (pF)

VR - Reverse Voltage (V)

TJ = 25 °C

0.01

0.1

1

10

0.00001 0.0001 0.001 0.01 0.1 1

t1 - Rectangular Pulse Duration (s)

Z

thJC

- Thermal Impedance (°C/W)

Single pulse

(thermal resistance)

.

.

P

DM

t

1

t

2

Notes:

1. Duty factor D = t

1/t2

2. Peak TJ = PDM x Z

thJC

+ T

C

10

D = 0.50
D = 0.20
D = 0.10
D = 0.05
D = 0.02
D = 0.01

0.01

0.1

1

10

0.00001 0.0001 0.001 0.01 0.1 1

t1 - Rectangular Pulse Duration (s)

Z

thJC

- Thermal Impedance (°C/W)

Single pulse

(thermal resistance)

.

.

P

DM

t

1

t

2

Notes:

1. Duty factor D = t

1/t2

2. Peak TJ = PDM x Z

thJC

+ T

C

10

100

D = 0.50
D = 0.20
D = 0.10
D = 0.05
D = 0.02
D = 0.01

Ultralow VF Hyperfast Rectifier for

Discontinuous Mode PFC, 15 A FRED Pt

Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage

Vishay Semiconductors

®

Fig. 4 - Maximum Thermal Impedance Z

Document Number: 94004 For technical questions within your region, please contact one of the following: www.vishay.com
Revision: 31-Mar-11 [email protected]

THE PRODUCTS DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

Fig. 5 - Maximum Thermal Impedance Z

, [email protected], [email protected] 3

This document is subject to change without notice.

Characteristics

thJC

Characteristics (FULL-PAK)

thJC

www.vishay.com/doc?91000

VS-15ETL06PbF, VS-15ETL06FPPbF

0 5 10 15 20 25

Allowable Case Temperature (°C)

I

F(AV)

- Average Forward Current (A)

130

140

150

160

170

180

See note (1)

Square wave (D = 0.50)
Rated V

R

applied

DC

0 5 10 15 25

Allowable Case Temperature (°C)

I

F(AV)

- Average Forward Current (A)

80

100

140

160

20

180

120

DC

Square wave (D = 0.50)
80 % rated V

R

applied

See note (1)

Vishay Semiconductors

Fig. 6 - Maximum Allowable Case Temperature vs.

Average Forward Current

Ultralow VF Hyperfast Rectifier for

Discontinuous Mode PFC, 15 A FRED Pt

25

20

15

10

5

Average Power Loss (W)

0

0 5 10 15 20 25

Fig. 8 - Forward Power Loss Characteristics

500

400

DC

I

- Average Forward Current (A)

F(AV)

®

RMS limit

D = 0.01

D = 0.02
D = 0.05
D = 0.10
D = 0.20
D = 0.50

IF = 30 A

IF = 15 A

Note

(1)

www.vishay.com For technical questions within your region, please contact one of the following: Document Number: 94004
4 [email protected]

THE PRODUCTS DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

Fig. 7 - Maximum Allowable Case Temperature vs.

Average Forward Current (FULL-PAK)

9000

8000

(nC)

rr

Q

7000

6000

5000

4000

3000

2000

1000

IF = 30 A

IF = 15 A

0

100 1000

Fig. 10 - Typical Stored Charge vs. dI

Formula used: TC = TJ - (Pd + Pd
Pd = Forward power loss = I
Pd

= Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated V

REV

x VFM at (I

F(AV)

REV

) x R

;

thJC

/D) (see fig. 8);

F(AV)

This document is subject to change without notice.

300

(ns)

rr

t

200

100

VR = 390 V
T

= 125 °C

J

= 25 °C

T

J

0

100 1000

dIF/dt (A/µs)

VR = 390 V
T

= 125 °C

J

= 25 °C

T

J

Fig. 9 - Typical Reverse Recovery Time vs. dI

/dt

F

dIF/dt (A/µs)

/dt

F

R

, [email protected], [email protected] Revision: 31-Mar-11

www.vishay.com/doc?91000

VS-15ETL06PbF, VS-15ETL06FPPbF

Q

rr

0.5 I

RRM

dI

(rec)M

/dt

0.75 I

RRM

I

RRM

t

rr

t

b

t

a

I

F

dIF/dt

0

(1)

(2)

(3)

(4)

(5)

(1) dI

F

/dt - rate of change of current

through zero crossing

(2) I

RRM

- peak reverse recovery current

(3) t

rr

- reverse recovery time measured
from zero crossing point of negative
going I

F

to point where a line passing

through 0.75 I

RRM

and 0.50 I

RRM

extrapolated to zero current.

(4) Q

rr

- area under curve dened by t

rr

and I

RRM

trr x I

RRM

2

Q

rr

=

(5) dI

(rec)M

/dt - peak rate of change of

current during t

b

portion of t

rr

Ultralow VF Hyperfast Rectifier for

Discontinuous Mode PFC, 15 A FRED Pt

= 200 V

V

R

0.01 Ω

L = 70 μH

D.U.T.

dIF/dt
adjust

G

Fig. 11 - Reverse Recovery Parameter Test Circuit

D

IRFP250

S

Vishay Semiconductors

®

Document Number: 94004 For technical questions within your region, please contact one of the following: www.vishay.com
Revision: 31-Mar-11 [email protected]

THE PRODUCTS DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

Fig. 12 - Reverse Recovery Waveform and Definitions

, [email protected], [email protected] 5

This document is subject to change without notice.

www.vishay.com/doc?91000

VS-15ETL06PbF, VS-15ETL06FPPbF

1 - Vishay Semiconductors product

2 - Current rating (15 = 15 A)

3 - E = Single diode

4

- T = TO-220, D2PAK

5 - L = Ultralow VF hyperfast recovery

6 - Voltage rating (06 = 600 V)

7 - None = TO-220AC

FP = TO-220 FULL-PAK

- PbF = Lead (Pb)-free

8

Tube standard pack quantity: 50 pieces

Device code

51 32 4 6 7 8

VS- 15 E T L 06 FP PbF

Vishay Semiconductors

Discontinuous Mode PFC, 15 A FRED Pt

ORDERING INFORMATION TABLE

Ultralow VF Hyperfast Rectifier for

®

LINKS TO RELATED DOCUMENTS

Dimensions

Part marking information

SPICE model www.vishay.com/doc?95270

TO-220AC FULL-PAK www.vishay.com/doc?95005

TO-220AC FULL-PAK www.vishay.com/doc?95009

TO-220AC www.vishay.com/doc?95221

TO-220AC www.vishay.com/doc?95224

www.vishay.com For technical questions within your region, please contact one of the following: Document Number: 94004
6 [email protected]

THE PRODUCTS DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

, [email protected], [email protected] Revision: 31-Mar-11

This document is subject to change without notice.

www.vishay.com/doc?91000

www.vishay.com

5° ± 0.5°

3.3

3.1

5° ± 0.5°

0.9

0.7

2.54 TYP.

2.54 TYP.

10.6

10.4

3.7

3.2

7.31

6.91

0.61

0.38

2.85

2.65

2.8

2.6

1.4

1.3

10°

4.8

4.6

16.0

15.8

16.4

15.4

(2 places)

R 0.7
R 0.5

Hole Ø

3.4

3.1

TYP.

1.15

1.05

13.56

13.05

Lead assignments

Diodes
1 + 2 - Cathode

3 - Anode

Conforms to JEDEC outline TO-220 FULL-PAK

DIMENSIONS in millimeters

Outline Dimensions

Vishay Semiconductors

Revision: 20-Jul-11

For technical questions within your region: [email protected]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

1

Document Number: 95005

, [email protected], [email protected]

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS in millimeters and inches

(6)

E

(7)

E2

Q

(6)

D

D1

13

L3

L4

2

A

Ø P

0.014 AB

Detail B

L

MM

C

(6)

H1

(7)

TO-220AC

B

Seating

plane

A

A

A1

Outline Dimensions

Vishay Semiconductors

123

DL1D

H1

θ

E

Thermal pad

D2 (6)

E1 (6)

2 x b2 2 x b

Lead assignments

Diodes
1 + 2 - Cathode

3 - Anode

CC

Detail B

Lead tip

SYMBOL

e1

MM

0.015 AB

c

MILLIMETERS INCHES

MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX.

A

A2

NOTES SYMBOL

View A - A

Conforms to JEDEC outline TO-220AC

MILLIMETERS INCHES

NOTES

A 4.25 4.65 0.167 0.183 E1 6.86 8.89 0.270 0.350 6

A1 1.14 1.40 0.045 0.055 E2 - 0.76 - 0.030 7

A2 2.56 2.92 0.101 0.115 e 2.41 2.67 0.095 0.105

b 0.69 1.01 0.027 0.040 e1 4.88 5.28 0.192 0.208

b1 0.38 0.97 0.015 0.038 4 H1 6.09 6.48 0.240 0.255 6, 7

b2 1.20 1.73 0.047 0.068 L 13.52 14.02 0.532 0.552

b3 1.14 1.73 0.045 0.068 4 L1 3.32 3.82 0.131 0.150 2

c 0.36 0.61 0.014 0.024 L3 1.78 2.13 0.070 0.084

c1 0.36 0.56 0.014 0.022 4 L4 0.76 1.27 0.030 0.050 2

D 14.85 15.25 0.585 0.600 3 Ø P 3.54 3.73 0.139 0.147

D1 8.38 9.02 0.330 0.355 Q 2.60 3.00 0.102 0.118

D2 11.68 12.88 0.460 0.507 6  90° to 93° 90° to 93°

E 10.11 10.51 0.398 0.414 3, 6

Notes

(1)

Dimensioning and tolerancing as per ASME Y14.5M-1994

(2)

Lead dimension and finish uncontrolled in L1

(3)

Dimension D, D1 and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured
at the outermost extremes of the plastic body

(4)

Dimension b1, b3 and c1 apply to base metal only

(5)

Controlling dimension: inches

(6)

Thermal pad contour optional within dimensions E, H1, D2 and E1

(7)

Dimension E2 x H1 define a zone where stamping and singulation irregularities are allowed

(8)

Outline conforms to JEDEC TO-220, D2 (minimum) where dimensions are derived from the actual package outline

Document Number: 95221 For technical questions within your region, please contact one of the following: www.vishay.com
Revision: 07-Mar-11 [email protected]

, [email protected], [email protected] 1

Legal Disclaimer Notice

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1