Page 1
SMD Aluminum Electrolytic Capacitors
Features
‧
12.5 ~ 16φ, 105℃, 5,000 hours assured
‧
Suitable for automotive application
‧
Peak acceleration: 50G
‧
RoHS Compliance
SPECIFICATIONS
Items Performance
Category Temperature Range
Capacitance Tolerance
Leakage Current (at 20℃)
Dissipation Factor Rated Voltage 6.3 10 16 25 35 50 63 80 100
(Tanδat 120Hz, 20℃)
Low Temperature Rated Voltage 6.3 10 16 25 35 50 63 80 100
Characteristics (at 120Hz) Impedance
Ratio
Endurance
Shelf Life Test
Ripple Current &
Frequency Multipliers
Vibration
I = 0.01CV or 3 (µA) whichever is greater (after 2 minutes)
Where, C = rated capacitance in µF V = rated DC working voltage in V
* The above specifications shall be satisfied when the capacitors are restored to 20℃after the rated voltage applied for
5,000 hours at 105℃.
* The above specifications shall be satisfied when the capacitors are restored to 20℃after exposing them for 1,000
hours at 105℃ without voltage applied.
Peak acceleration: 50G
Peak to peak amplitude: 1.5mm
Frequency: 5 to 2,000 Hz reciprocation for 20 min.
Direction and duration of vibration: 3 orthogonal directions mutually each for 4 Hrs.
Tanδ(max)
When the capacitance exceeds 1,000μF, 0.002 shall be added every 1,000μF increase.
0.30 0.26 0.22 0.16 0.13 0.10 0.08 0.08 0.07
Impedance ratio shall not exceed the values given in the table below.
Z(-25℃)/Z(+20℃)
Z(-55℃)/Z(+20℃)
Test Time 5,000 Hrs
Capacitance Change Within ±30% of initial value
Dissipation Factor Less than 300% of specified value
Leakage Current Within specified value
Test Time 1,000 Hrs
Capacitance Change Within ±30% of initial value
Dissipation Factor Less than 300% of specified value
Leakage Current Within specified value
Frequency(Hz) 50, 60 120 1k 10k up
Multiplier 0.60 0.70 0.85 1.0
DIAGRAM OF DIMENSIONS
φD±
L
0.4 Max
Vent
0.5
0.5 max
0.2
±
A
B±0.2
1.0 Max
W
P
C±0.2
-55 ~ +105℃
±20% (at 120Hz, 20℃)
4 3 2 2 2 2 2 2 2
8 5 4 3 3 3 3 3 3
LEAD SPACING AND DIAMETER Unit: mm
φD
12.5 13.5 ± 0.5 13.0 13.4 15.4 1.1 ~ 1.4 4.4
12.5 16 ± 0.5 13.0 13.4 15.4 1.1 ~ 1.4 4.4
16 16.5 ± 0.5 16.5 16.9 18.9 1.1 ~ 1.4 6.4
L A B C W
Marking color: Black
VLV
P ± 0.2
2011 Version
Page 2
SMD Aluminum Electrolytic Capacitors
VLV
MARKING
φ
D ≧ 12.5mm
Negative
polarity
a 1
VLV
2200
6.3V
Dimension: φD × L(mm)
Ripple Current: mA/rms at 100k Hz, 105°C
DIMENSION & PERMISSIBLE RIPPLE CURRENT
V. DC
µ
F Contents
330 331
470 471
680 681
1,000 102
1,500 152
2,200 222
3,300 332 12.5×16 0.058 950 16×16.5 0.052 1,300 16×16.5 0.052 1,300
4,700 472 16×16.5 0.052 1,300 16×16.5 0.052 1,300
V. DC
µ
F Contents
100 101
150 151
220 221
330 331 16×16.5 0.080 900 16×16.5 0.17 650
470 471 16×16.5 0.080 900
6.3V (0J) 10V (1A) 16V (1C) 25V (1E) 35V (1V) 50V (1H)
φD×L
12.5×13.5
φD×L
12.5×13.5
12.5×13.5
Imp. mA
0.066 850 12.5×16 0.058 950 16×16.5 0.052 1,300 16×16.5 0.052 1,300
63V (1J) 80V (1K) 100V (2A)
Imp. mA
0.140 700
0.140 700
Date code
Series
name
Rated cap.
Rated
voltage
φD×L
12.5×13.5
φD×L
12.5×13.5
12.5×16
Imp. mA
0.066 850 12.5×16 0.058 950 16×16.5 0.052 1,300
Imp. mA
0.32 450 12.5×16 0.26 550
0.26 550 16×16.5 0.17 650
φD×L
12.5×13.5
φD×L
12.5×13.5
Impedance: Ω/ at 100k Hz, 20℃
Imp. mA
0.066 850 12.5×16 0.058 950 16×16.5 0.052 1,300
Imp. mA
0.32 450
φD×L
12.5×13.5
Imp. mA
0.066 850 12.5×16 0.058 950 16×16.5 0.070 1,100
φD×L
12.5×13.5
12.5×16 0.058 950 16×16.5 0.070 1,100
Imp. mA
0.066 850
φD×L
12.5×13.5
Imp. mA
0.11 700
2011 Verison
Loading...