Page 1
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > LA Varistor Series
LA Varistor Series
Agency Approvals
Agency Agency Approval
UL1449 E320116
CECC 42201-006
IEC 61051-1
IEC 61051-2
IEC 60950-1 (Annex Q) for 14mm and
20mm only
22.2-1 91788
CECC 42201-006
IEC 61051-1
IEC 61051-2
IEC 60950-1 (Annex Q) for 14mm and
20mm only
Agency File
Number
116895
E1273/F
RoHS
Description
The LA Varistor Series of transient voltage surge
suppressors are radial leaded varistors (MOVs)
that are designed to be operated continuously
across AC power lines. These UL recognized
varistors require very little mounting space, and are
offered in various standard lead form options.
The LA Varistor Series are available in four model
sizes: 7mm, 10mm, 14mm and 20mm; and have a
V
voltage range from 130V to 1000V, and an
M(AC)RMS
energy absorption capability up to 360J. Some LA Series
model numbers are available with clamping voltage
selections, designated by a model number suffix of
either A or B. The 'A' selection is the standard model;
the 'B' selection provides a lower clamping voltage.
See LA Series Device Ratings and Specifications
Table for part number and brand information.
Features
• Lead–free, HalogenFree and RoHS
• No derating up to
85ºC ambient
compliant.
• Energy absorption
capability (W
)
TM
• Available in tape and
reel or bulk pack
up to 360J
• Wide operating
voltage range
V
130V to 1000V
M(AC)RMS
Additional Information
Datasheet
Resources
Samples
Absolute Maximum Ratings
• For ratings of individual members of a series, see Device Ratings and Specifications chart
Continuous
Steady State Applied Voltage:
AC Voltage Range (V
DC Voltage Range (V
) 130 to 1000 V
M(AC)RMS
) 175 to 1200 V
M(DC)
Transients:
Peak Pulse Current (ITM)
For 8/20µs Current Wave (See Figure 2) 1200 to 6500 A
Single Pulse Energy Range
For 10/1000µs Current Wave (W
Operating Ambient Temperature Range (T
Storage Temperature Range (T
Temperature Coefficient (a
Hi-Pot Encapsulation (COATING Isolation Voltage Capability)
(Dielectric must withstand indicated DC voltage for one minute per MIL-STD 202, Method 301)
COATING Insulation Resistance 1000 MΩ
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or
any other conditions above those indicated in the operational sections of this specification is not implied.
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/12/18
STG
V
) of Clamping Voltage (VC) at Specified Test Current <0.01 %/OC
) -55 to +85
A
) -55 to +125
) 11 to 360 J
TM
LA Series Units
O
C
O
C
2500 V
Page 2
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > LA Varistor Series
LA Series Ratings & Specifications
Maximum Rating (85°C) Specifications (25°C)
Continuous Transient
Part
Number
Branding
Model Size
Disc Dia.
(mm)
V
RMS
V
M(AC)VM(DC)
V
DC
Energy 10
x 1000µs
WTM ITM
Peak
Current 8
x 20µs
(V) (V) (J) (A) (V) (V) (V) (A) (pF)
V130LA1P P1301 7 130 175 11 1200 198 242 390 10 180
V130LA2P P1302 7 130 175 11 1200 184.5 225.5 340 10 180
V130LA5P P1305 10 130 175 20 2500 184.5 225.5 340 25 450
V130LA10AP P130L10 14 130 175 38 4500 184.5 225.5 340 50 1000
V130LA20AP P130L20 20 130 175 70 6500 184.5 225.5 340 100 1900
V130LA20BP P130L20B 20 130 175 70 6500 190 220 325 100 1900
V140LA2P P1402 7 140 180 12 1200 198 242 360 10 160
V140LA5P P1405 10 140 180 22 2500 198 242 360 25 400
V140LA10AP P140L10 14 140 180 42 4500 198 242 360 50 900
V140LA20AP P140L20 20 140 180 75 6500 198 242 340 100 1750
V150LA1P P1501 7 150 200 13 1200 225 275 430 10 150
V150LA2P P1502 7 150 200 13 1200 216 264 395 10 150
V150LA5P P1505 10 150 200 25 2500 216 264 395 25 360
V150LA10AP P150L10 14 150 200 45 4500 216 264 395 50 800
V150LA20AP P150L20 20 150 200 80 6500 216 264 395 100 1600
V150LA20BP P150L20B 20 150 200 80 6500 216 243 360 100 1600
V175LA2P P1752 7 175 225 15 1200 243 297 455 10 130
V175LA5P P1755 10 175 225 30 2500 243 297 455 25 350
V175LA10AP P175L10 14 175 225 55 4500 243 297 455 50 700
V175LA20AP P175L20 20 175 225 90 6500 243 297 455 100 1400
V230LA4P P2304 7 230 300 20 1200 324 396 595 10 100
V230LA10P P230L 10 230 300 35 2500 324 396 595 25 250
V230LA20AP P230L20 14 230 300 70 4500 324 396 595 50 550
V230LA40AP P230L40 20 230 300 122 6500 324 396 595 10 0 1100
V250LA2P P2502 7 250 330 21 1200 369 451 730 10 90
V250LA4P P2504 7 250 330 21 1200 351 429 650 10 90
V250LA10P P250L 10 250 330 40 2500 351 429 650 25 220
V250LA20AP P250L20 14
250 330 72 4500 351 429 650 50 500
V250LA40AP P250L40 20 250 330 130 6500 351 429 650 100 1000
V250LA40BP P250L40B 20 250 330 130 6500 354 413 620 100 1000
V275LA2P P2752 7 275 369 23 1200 405 495 775 10 80
V275LA4P P2754 7 275 369 23 1200 387 473 710 10 80
V275LA10P P275L 10 275 369 45 2500 387 473 710 25 200
V275LA20AP P275L20 14 275 369 75 4500 387 473 710 50 450
V275LA40AP P275L40 20 275 369 140 6500 387 473 710 100 900
V275LA40BP P275L40B 20 275 369 140 6500 389 453 680 10 0 900
V300LA2P P3002 7 300 405 25 1200 441 539 870 10 70
V300LA4P P3004 7 300 405 25 1200 423 517 775 10 70
V300LA10P P300L 10 300 405 46 2500 423 517 775 25 180
V300LA20AP P300L20 14 300 405 77 4500 423 517 775 50 400
V300LA40AP P300L40 20 300 405 165 6500 423 517 775 100 800
V320LA7P P3207 7 320 420 25 1200 459 561 850 10 65
V320LA10P P320L 10 320 420 48 2500 459 561 850 25 170
V320LA20AP P320L20 14 320 420 80 4500 459 561 850 50 380
V320LA40BP P320L40 20 320 420 150 6500 462 540 810 100 750
V385LA7P P3857 7 385 505 27 1200 558 682 1025 10 60
Varistor
Voltage at
1mA
DC Test
Current
V
NOM
Min
V
NOM
Max
Maximum
Clamping
Voltage
8 x 20 µs
V
CIPK
Typical
Capaci-
tance f =
1MHz
C
Specifications are subject to change without notice.
© 2018 Littelfuse, Inc.
Revised: 12/12/18
Page 3
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > LA Varistor Series
LA Series Ratings & Specifications (Continued...)
Maximum Rating (85°C) Specifications (25°C)
Continuous Transient
Part
Number
Branding
Model Size
Disc Dia.
(mm)
V
RMS
V
M(AC)VM(DC)
V
DC
Energy 10
x 1000µs
WTM ITM
Peak
Current 8
x 20µs
(V) (V) (J) (A) (V) (V) (V) (A) (pF)
V385LA10P P385L 10 385 505 51 2500 558 682 1025 25 160
V385LA20AP P385L20 14 385 505 85 4500 558 682 1025 50 360
V385LA40BP P385L40 20 385 505 160 6500 558 682 1025 100 700
V420LA7P P4207 7 420 560 30 1200 612 748 112 0 10 55
V420LA10P P420L 10 420 560 55 2500 612 748 112 0 25 140
V420LA20AP P420L20 14 420 560 90 4500 612 748 112 0 50 300
V420LA40BP P420L40 20 420 560 160 6500 610 720 1060 100 600
V460LA7P P4607 7 460 615 37 1200 643.5 786.5 1190 10 55
V460LA10P P460L 10 460 615 56 2500 643.5 786.5 1190 25 120
V460LA20AP P460L20 14 460 615 100 4500 643.5 786.5 1190 50 280
V460LA40BP P460L40 20 460 615 170 6500 643.5 755.5 1110 100 560
V480LA7P P4807 7 480 640 35 1200 675 825 1240 10 50
V480LA10P P480L 10 480 640 60 2500 675 825 1240 25 120
V480LA40AP P480L40 14 480 640 105 4500 675 825 1240 50 270
V480LA80BP P480L80 20 480 640 180 6500 675 790 116 0 10 0 550
V510LA10P P510L 10 5 10 675 63 2500 738 902 1350 25 100
V510LA40AP P510L40 14 510 675 110 4500 738 902 1350 50 250
V510LA80BP P510L80 20 510 675 190 6500 738 860 1280 100 500
V575LA10P P575L 10 575 730 65 2500 819 1001 1500 25 90
V575LA40AP P575L40 14 575 730 120 4500 819 1001 1500 50 220
V575LA80BP P575L80 20 575 730 220 6500 819 960 1410 10 0 450
V625LA10P P625L 10 625 825 67 2500 900 110 0 1650 25 80
V625LA40AP P625L40 14 625 825 125 4500 900 1100 1650 50 210
V625LA80BP P625L80 20 625 825 230 6500 900 110 0 1650 100 425
V680LA10P P680L 10 680 875 75 2500 990 1210 1875 25 65
V680LA80AP P680L80 14 680 875 145 4500 990 1210 1875 50 190
V680LA100BP P680L100 20 680 875 260 6500 990 113 0 17 00 100 380
V660LA10P P660L 10
660 850 70 2500 972 118 8 1820 25 70
V660LA50AP P660L50 14 660 850 140 4500 972 1188 1820 50 200
V660LA100BP P660L100 20 660 850 250 6500 940 110 0 1650 100 400
V1000LA80AP P1000L8 14 1000 1200 220 4500 1500 1800 2700 50 130
V1000LA160BP P1000L16 20 1000 1200 360 6500 1425 1600 2420 10 0 250
NOTE: Average power dissipation of transients not to exceed 0.25W, 0.4W, 0.6W or 1W for model sizes 7mm, 10mm, 14mm and 20mm, respectively.
Varistor
Voltage at
1mA
DC Test
Current
V
NOM
Min
V
NOM
Max
Maximum
Clamping
Voltage
8 x 20 µs
V
CIPK
Typical
Capaci-
tance f =
1MHz
C
Phenolic Coating Option -- LA Series Varistors for Hi-Temperature Operating Conditions:
• Phenolic–coated LA Series devices are available with improved maximum operating maximum temperature 125°C.
• These devices also have improved temperature cycling performance capability.
• Ratings and Specifications are as per standard LA Series except Hi–Pot Encapsulation (Isolation Voltage Capability) = 500V.
• These devices are not UL, CSA, VDE or CECC certified.
• To order: add X1347 to end of part number (e.g. V230LA20APX1347).
• Product marking:
LF 9
Lead-Free,
Halogen-Free
& RoHS Compliant
Indicator
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/12/18
P230P20
YYWW
Phenolic Coated
Option
Identifier
Page 4
Metal-Oxide Varistors (MOVs)
100
90
50
10
O
1
T
T
1
T
2
TIME
PERCENT OF PEAK VALUE
100
90
80
70
60
50
40
30
20
10
0
-55 50 60 70 80 90 10 0110 120130 140150
AMBIENT TEMPERATURE (
o
C)
PERCENT OF RATED VALUE
100
90
80
70
60
50
40
30
20
10
0
-55 50 60 70 80 90 10 0110 120130 140150
AMBIENT TEMPERATURE (
o
C)
PERCENT OF RATED VALUE
Radial Lead Varistors > LA Varistor Series
Copper Electrode Option:
• Add 'W' to the end of the part number (e.g. V230LA20APW)
• Product marking:
Lead-Free,
Halogen-Free
& RoHS Compliant
Indicator
Current Energy and Power Dissipation Ratings
LF 9
P230L20W
YYWW
Copper Electrode
Option
Identifier
Should transients occur in rapid succession, the average
power dissipation is the energy (watt-seconds) per pulse
times the number of pulses per second. The power so
developed must be within the specifications shown on the
Device Ratings and Specifications Table for the specific
Figure 1A - Power Derating for Epoxy Coated
Peak Pulse Current Test Waveform
device. The operating values of a MOV need to be derated
at high temperatures as shown above. Because varistors
only dissipate a relatively small amount of average power
they are not suitable for repetitive applications that involve
substantial amounts of average power dissipation.
Figure 1B - Power Derating for Phenolic Coated
01 = Virtual Origin of Wave
T = Time from 10% to 90% of Peak
T1 = Rise Time = 1.25 x T
T2 = Decay Time
Example - For an 8/20 µs Current Waveform:
8µs = T1 = Rise Time
20µs = T2 = Decay Time
Figure 2
Specifications are subject to change without notice.
© 2018 Littelfuse, Inc.
Revised: 12/12/18
Page 5
Metal-Oxide Varistors (MOVs)
Transient V-I Characteristics Curves
200
6,000
5,000
4,000
3,000
1,000
900
800
700
600
500
400
300
10
-3
10
-2
10
-1
10010
1
10
2
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
2,000
10
3
V150LA1(P)
V130LA1(P)
V300LA2(P)
V275LA2(P)
V250LA2(P)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
130 TO 300V
M(AC)
RATING
T
A
= -55oC TO 85oC
10
-3
10
-2
10
-1
10
0
10
1
10
2
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
10
3
4,000
3,000
2,000
1,000
900
800
700
600
500
400
300
200
100
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
130 TO 300V
M(AC)
RATING
T
A
= -55oC TO 85oC
V300LA4(P)
V275LA4(P)
V250LA4(P)
V230LA4(P)
V130LA2(P)
V140LA2(P)
V150LA2(P)
V175LA2(P)
Transient V-I Characteristics Curves
FIGURE 3. CLAMPING VO LTAGE FOR V130LA1(P) - V300LA2(P) FIGURE 4. CLAMPING VOLTAGE FOR V130LA2
(P) -
V300LA4(P)
200
6,000
5,000
4,000
3,000
1,000
900
800
700
600
500
400
300
10
-3
10-210
-1
10010110
2
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
2,000
10
3
V150LA1(P)
V130LA1(P)
V300LA2(P)
V275LA2(P)
V250LA2(P)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
130 TO 300V
M(AC)
RATING
T
A
= -55oC TO 85oC
10
-3
10
-2
10
-1
10
0
10110
2
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
10
3
4,000
3,000
2,000
1,000
900
800
700
600
500
400
300
200
100
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
130 TO 300V
M(AC)
RATING
T
A
= -55oC TO 85oC
V300LA4(P)
V275LA4(P)
V250LA4(P)
V230LA4(P)
V130LA2(P)
V140LA2(P)
V150LA2(P)
V175LA2(P)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
T
A
= -55oC TO 85oC
320 TO 480V
M(AC)
RATING
V420LA7
(P)
V385LA7
(P)
V320LA7
(P)
V460LA7
(P)
V480LA7
(P)
10-310-210-110010110
2
10
4
10
3
5,000
3,000
2,000
1,000
500
PEAK AMPERES (A)
MAXIMUM PEAK VOLTS (V)
200
6,000
5,000
4,000
3,000
1,000
900
800
700
600
500
400
300
10
-3
10-210
-1
10010110
2
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
2,000
10
3
V275LA10(P)
V250LA10(P)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 10mm
130 TO 420V
M(AC)
RATING
T
A
= -55oC TO 85oC
V230LA10(P)
V420LA10(P)
V175LA5(P)
V130LA5(P)
V140LA5(P)
V150LA5(P)
10
-3
10
-2
10
-1
10
0
10110
2
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
10
3
4,000
3,000
2,000
1,000
900
800
700
600
500
400
300
200
100
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
130 TO 300V
M(AC)
RATING
T
A
= -55oC TO 85oC
V300LA4(P)
V275LA4(P)
V250LA4(P)
V230LA4(P)
V130LA2(P)
V140LA2(P)
V150LA2(P)
V175LA2(P)
2,000
1,000
200
100
50
20
10
5
1
2
500
20 100 1,000 10,000
IMPULSE DURATION (μs)
SURGE CURRENT (A)
1
2
15
10
2
10
4
10
5
10
6
MODEL SIZE 7mm
V130LA1(P) - V480LA7(P)
10
3
INDEFINITE
5,000
2,000
200
100
50
20
10
5
2
500
20 100 1,000 10,000
IMPULSE DURATION (μs)
SURGE CURRENT (A)
1
2
15
10
4
10
5
10
6
MODEL SIZE 10mm
V130LA5(P) - V680LA10(P)
10
3
INDEFINITE
1,000
10
2
Radial Lead Varistors > LA Varistor Series
Transient V-I Characteristics Curves
Maximum Clamping Voltage for 7mm Parts
V130LA1(P) - V300LA2(P)
Figure 3
V130LA2(P) - V300LA4(P)
Pulse Rating Curves
Repetitive Surge Capability for 7mm Parts
V130LA1(P) - V480LA7(P)
Figure 4
Note: Repetitive surge capability is qualified and tested based on 8/20us current waveform
(not combination waveform) and UL1449 40.7.3 (Edition 4) test condition.
Figure 5
V320LA7(P) - V480LA7(P)
Figure 6
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/12/18
Page 6
Metal-Oxide Varistors (MOVs)
Transient V-I Characteristics Curves
FIGURE 3. CLAMPING VO LTAGE FOR V130LA1(P) - V300LA2(P) FIGURE 4. CLAMPING VO LTAGE FOR V130LA2
(P) -
V300LA4(P)
FIGURE 5. CLAMPING VO LTAGE FOR V320LA7(P) - V480LA7(P) FIGURE 6. CLAMPING VOLTAGE FOR V130LA5(P) - V420LA10(P)
200
6,000
5,000
4,000
3,000
1,000
900
800
700
600
500
400
300
10
-3
10
-2
10
-1
10010
1
10
2
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
2,000
10
3
V150LA1(P)
V130LA1(P)
V300LA2(P)
V275LA2(P)
V250LA2(P)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
130 TO 300V
M(AC)
RATING
T
A
= -55oC TO 85oC
10
-3
10
-2
10
-1
10
0
10110
2
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
10
3
4,000
3,000
2,000
1,000
900
800
700
600
500
400
300
200
100
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
130 TO 300V
M(AC)
RATING
T
A
= -55oC TO 85oC
V300LA4(P)
V275LA4(P)
V250LA4(P)
V230LA4(P)
V130LA2(P)
V140LA2(P)
V150LA2(P)
V175LA2(P)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
T
A
= -55oC TO 85oC
320 TO 480V
M(AC)
RATING
V420LA7
(P)
V385LA7
(P)
V320LA7
(P)
V460LA7
(P)
V480LA7
(P)
10-310-210-110010110
2
10
4
10
3
5,000
3,000
2,000
1,000
500
PEAK AMPERES (A)
MAXIMUM PEAK VOLTS (V)
200
6,000
5,000
4,000
3,000
1,000
900
800
700
600
500
400
300
10
-3
10-210
-1
10010110
2
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
2,000
10
3
V275LA10(P)
V250LA10(P)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 10mm
130 TO 420V
M(AC)
RATING
T
A
= -55oC TO 85oC
V230LA10(P)
V420LA10(P)
V175LA5(P)
V130LA5(P)
V140LA5(P)
V150LA5(P)
10-310-210-110010110
2
10
4
10
3
5,000
3,000
2,000
1,000
500
V575LA10(P)
V510LA10(P)
V480LA10(P)/
V460LA10(P)
V385LA10(P)
V300LA10(P)
V320LA10(P)
PEAK AMPERES (A)
V625LA10(P)
V660LA10(P)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 10mm
T
A
= -55oC TO 85oC
300 TO 680V
M(AC)
RATING
MAXIMUM PEAK VOLTS (V)
200
6,000
5,000
4,000
3,000
1,000
900
800
700
600
500
400
300
10
-3
10
-2
10
-1
10010110
2
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
2,000
10
3
V275LA20A(P)
V250LA20A(P)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 14mm
130 TO 320V
M(AC)
RATING
T
A
= -55oC TO 85oC
V230LA20A(P)
V175LA10A(P)
V130LA10A(P)
V140LA10A(P)
V150LA10A(P)
V320LA20A(P)
V300LA20A(P)
V680LA10(P)
(P) -
V300LA4(P)
10
-3
10
-2
10
-1
10
0
10110
2
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
10
3
4,000
3,000
2,000
1,000
900
800
700
600
500
400
300
200
100
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
130 TO 300V
M(AC)
RATING
T
A
= -55oC TO 85oC
V300LA4(P)
V275LA4(P)
V250LA4(P)
V230LA4(P)
V130LA2(P)
V140LA2(P)
V150LA2(P)
V175LA2(P)
200
6,000
5,000
4,000
3,000
1,000
900
800
700
600
500
400
300
10
-3
10
-2
10
-1
10010110
2
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
2,000
10
3
V275LA10(P)
V250LA10(P)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 10mm
130 TO 420V
M(AC)
RATING
T
A
= -55oC TO 85oC
V230LA10(P)
V420LA10(P)
V175LA5(P)
V130LA5(P)
V140LA5(P)
V150LA5(P)
5,000
2,000
200
100
50
20
10
5
2
500
20 10 0 1,000 10,000
IMPULSE DURATION (μs)
SURGE CURRENT (A)
1
2
15
10
4
10
5
10
6
MODEL SIZE 10mm
V130LA5(P) - V680LA10(P)
10
3
INDEFINITE
1,000
10
2
Radial Lead Varistors > LA Varistor Series
Transient V-I Characteristics Curves (Continued...)
Maximum Clamping Voltage for 10mm Parts
V130LA5(P) - V420LA10(P)
Pulse Rating Curves (Continued...)
Repetitive Surge Capability for 10mm Parts
V130LA5(P) - V680LA10(P)
Figure 7
V300LA10(P) - V680LA10(P)
Figure 8
Note: Repetitive surge capability is qualified and tested based on 8/20us current waveform
(not combination waveform) and UL1449 40.7.3 (Edition 4) test condition.
Figure 9
Specifications are subject to change without notice.
© 2018 Littelfuse, Inc.
Revised: 12/12/18
Page 7
Metal-Oxide Varistors (MOVs)
(P) -
V300LA4(P)
10
-3
10
-2
10
-1
10
0
10
1
10
2
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
10
3
4,000
3,000
2,000
1,000
900
800
700
600
500
400
300
200
100
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
130 TO 300V
M(AC)
RATING
T
A
= -55oC TO 85oC
V300LA4(P)
V275LA4(P)
V250LA4(P)
V230LA4(P)
V130LA2(P)
V140LA2(P)
V150LA2(P)
V175LA2(P)
200
6,000
5,000
4,000
3,000
1,000
900
800
700
600
500
400
300
10
-3
10-210
-1
10010
1
10
2
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
2,000
10
3
V275LA10(P)
V250LA10(P)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 10mm
130 TO 420V
M(AC)
RATING
T
A
= -55oC TO 85oC
V230LA10(P)
V420LA10(P)
V175LA5(P)
V130LA5(P)
V140LA5(P)
V150LA5(P)
200
6,000
5,000
4,000
3,000
1,000
900
800
700
600
500
400
300
10
-3
10
-2
10
-1
10010
1
10
2
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
2,000
10
3
V275LA20A(P)
V250LA20A(P)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 14mm
130 TO 320V
M(AC)
RATING
T
A
= -55oC TO 85oC
V230LA20A(P)
V175LA10A(P)
V130LA10A(P)
V140LA10A(P)
V150LA10A(P)
V320LA20A(P)
V300LA20A(P)
5,000
3,000
1,000
500
300
10
-310-210-1100101102
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
2,000
10
3
10
-4
V1000LA80A(P)
V660LA50A(P)
MAXIMUM CLAMPING VO LTAG E
MODEL SIZE 14mm
385 TO 1000V
M(AC)
RATING
T
A
= -55oC TO 85oC
700
V625LA40A(P)
3,000
2,000
1,000
900
800
700
600
500
400
300
200
10
-3
10
-2
10
-1
10010110
2
10
4
MAXIMUM PEAK VO LT S (V)
PEAK AMPERES (A)
10
3
V275LA40A(P)
V250LA40A(P)
V150LA20A(P)
V130LA20A(P)
V175LA20A(P)
MAXIMUM CLAMPING VO LTAG E
MODEL SIZE 20mm
130 TO 275V
M(AC)
RATING
T
A
= -55oC TO 85oC
V680LA80A(P)
V575LA40A(P)
V510LA40A(P)
V480LA40A(P)/V460LA20A(P)
V420LA20A(P)
V385LA20A(P)
FIGURE 14. SURGE CURRENT RATING CURVES FOR
V130LA1(P) - V480LA7(P)
FIGURE 15. SURGE CURRENT RATING CURVES FOR
V130LA5(P) - V680LA10(P)
2,000
1,000
200
100
50
20
10
5
1
2
500
20 10 0 1,000 10,000
IMPULSE DURATION (μs)
SURGE CURRENT (A)
1
2
15
10
2
10
4
10
5
10
6
MODEL SIZE 7mm
V130LA1(P) - V480LA7(P)
10
3
INDEFINITE
5,000
2,000
200
100
50
20
10
5
2
500
20 10 0 1,000 10,000
IMPULSE DURATION (μs)
SURGE CURRENT (A)
1
2
15
10
4
10
5
10
6
MODEL SIZE 10mm
V130LA5(P) - V680LA10(P)
10
3
INDEFINITE
1,000
10
2
5,000
2,000
200
100
50
20
10
5
2
500
20 100 1,000 10,000
IMPULSE DURATION (μs)
SURGE CURRENT (A)
1
2
15
10
4
10
5
10
6
MODEL SIZE 14mm
V130LA10A(P) - V320LA20A(P)
10
3
INDEFINITE
1,000
10
2
5,000
2,000
200
100
50
20
10
5
2
500
20 100 1,000 10,000
IMPULSE DURATION (μs)
SURGE CURRENT (A)
1
2
15
10
4
10
5
10
6
MODEL SIZE 14mm
V385LA20A(P) - V1000LA80A(P)
10
3
INDEFINITE
1,000
10
2
FIGURE 15. SURGE CURRENT RATING CURVES FOR
V130LA5(P) - V680LA10(P)
5,000
2,000
200
100
50
20
10
5
2
500
20 10 0 1,000 10,000
IMPULSE DURATION (μs)
SURGE CURRENT (A)
1
2
15
10
4
10
5
10
6
MODEL SIZE 10mm
V130LA5(P) - V680LA10(P)
10
3
INDEFINITE
1,000
10
2
5,000
2,000
200
100
50
20
10
5
2
500
20 100 1,000 10,000
IMPULSE DURATION (μs)
SURGE CURRENT (A)
1
2
15
10
4
10
5
10
6
MODEL SIZE 14mm
V385LA20A(P) - V1000LA80A(P)
10
3
INDEFINITE
1,000
10
2
Radial Lead Varistors > LA Varistor Series
Transient V-I Characteristics Curves (Continued...)
Maximum Clamping Voltage for 14mm Parts
V130LA10A(P) - V320LA20A
Figure 10 Figure 11
V385LA20A(P) V1000LA80A(P)
Pulse Rating Curves (Continued...)
Repetitive Surge Capability for 14mm Parts
V130LA10A(P) - V320LA20A(P)
V385LA20A(P) - V1000LA80A(P)
Figure 12 Figure 13
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/12/18
Note: Repetitive surge capability is qualified and tested based on 8/20us current waveform
(not combination waveform) and UL1449 40.7.3 (Edition 4) test condition.
Page 8
Metal-Oxide Varistors (MOVs)
(P)
-
FIGURE 10.CLAMPING VOLT AGE FOR V130LA20A
(P)
- V275LA40A
(P)
(P)
- V275LA40
(P)
FIGURE 12. CLAMPING VOLTAG E FOR V140LA20A
(P)
- V230LA40A
(P)
10010110
2
10
4
10
3
V1000LA80A(P)
3,000
2,000
1,000
900
800
700
600
500
400
300
200
10
-3
10-210
-1
10010110
2
10
4
MAXIMUM PEAK VOLT S (V)
PEAK AMPERES (A)
10
3
V275LA40A(P)
V250LA40A(P)
V150LA20A(P)
V130LA20A(P)
V175LA20A(P)
MAXIMUM CLAMPING VOLTAG E
MODEL SIZE 20mm
130 TO 275V
M(AC)
RATING
T
A
= -55oC TO 85oC
10110
2
10
4
10
3
3,000
2,000
500
200
10
-310-210-1100101102
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
1,000
10
3
MAXIMUM CLAMPING VOLTAG E
MODEL SIZE 20mm
140 TO 230V
M(AC)
RATING
T
A
= -55oC TO 85oC
300
V140LA20A(P)
V230LA40A(P)
5,000
3,000
1,000
500
10
-310-210-1100101102
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
2,000
10
3
V625LA80B(P)
V660LA100B(P)
V1000LA160B(P)
MAXIMUM CLAMPING VOLTAG E
MODEL SIZE 20mm
300 TO 1000V
M(AC)
RATING
T
A
= -55oC TO 85oC
V575LA80B(P)
V680LA80A(P)
V510LA80B(P)
V480LA80B(P)/
V460LA40B(P)
V680LA100B(P)
V420LA40B(P)
V385LA40B(P)
V320LA40B(P)
V300LA40A(P)
V575LA40A(P)
V510LA40A(P)
V480LA40A(P)/V460LA20A(P)
V420LA20A(P)
V385LA20A(P)
FIGURE 14. SURGE CURRENT RATING CURVES FOR
V130LA1(P) - V480LA7(P)
FIGURE 15. SURGE CURRENT RATING CURVES FOR
V130LA5(P) - V680LA10(P)
FIGURE 16. SURGE CURRENT RATING CURVES FOR
V130LA10A(P) - V320LA20A(P)
FIGURE 17. SURGE CURRENT RATING CURVES FOR
V385LA20A(P) - V1000LA80A(P)
2,000
1,000
200
100
50
20
10
5
1
2
500
20 10 0 1,000 10,000
IMPULSE DURATION (μs)
SURGE CURRENT (A)
1
2
15
10
2
10
4
10
5
10
6
MODEL SIZE 7mm
V130LA1(P) - V480LA7(P)
10
3
INDEFINITE
5,000
2,000
200
100
50
20
10
5
2
500
20 10 0 1,000 10,000
IMPULSE DURATION (μs)
SURGE CURRENT (A)
1
2
15
10
4
10
5
10
6
MODEL SIZE 10mm
V130LA5(P) - V680LA10(P)
10
3
INDEFINITE
1,000
10
2
5,000
2,000
200
100
50
20
10
5
2
500
20 100 1,000 10,000
IMPULSE DURATION (μs)
SURGE CURRENT (A)
1
2
15
10
4
10
5
10
6
MODEL SIZE 14mm
V130LA10A(P) - V320LA20A(P)
10
3
INDEFINITE
1,000
10
2
5,000
2,000
200
100
50
20
10
5
2
500
20 100 1,000 10,000
IMPULSE DURATION (μs)
SURGE CURRENT (A)
1
2
15
10
4
10
5
10
6
MODEL SIZE 14mm
V385LA20A(P) - V1000LA80A(P)
10
3
INDEFINITE
1,000
10
2
10,000
2,000
200
100
50
20
10
5
2
500
20 10 0 1,000 10,000
IMPULSE DURATION (μs)
SURGE CURRENT (A)
1
2
10
4
10
5
10
6
MODEL SIZE 20mm
V130LA20A(P) - V320LA40B(P)
10
3
INDEFINITE
1,000
10
2
15
5,000
1
10,000
2,000
200
100
50
20
10
5
2
500
20 10 0 1,000 10,000
IMPULSE DURATION (μs)
SURGE CURRENT (A)
1
2
10
4
10
5
10
6
MODEL SIZE 20mm
V385LA40B(P) - V1000LA160B(P)
10
3
INDEFINITE
1,000
10
2
15
5,000
1
FIGURE 15. SURGE CURRENT RATING CURVES FOR
V130LA5(P) - V680LA10(P)
FIGURE 17. SURGE CURRENT RATING CURVES FOR
V385LA20A(P) - V1000LA80A(P)
5,000
2,000
200
100
50
20
10
5
2
500
20 10 0 1,000 10,000
IMPULSE DURATION (μs)
SURGE CURRENT (A)
1
2
15
10
4
10
5
10
6
MODEL SIZE 10mm
V130LA5(P) - V680LA10(P)
10
3
INDEFINITE
1,000
10
2
5,000
2,000
200
100
50
20
10
5
2
500
20 10 0 1,000 10,000
IMPULSE DURATION (μs)
SURGE CURRENT (A)
1
2
15
10
4
10
5
10
6
MODEL SIZE 14mm
V385LA20A(P) - V1000LA80A(P)
10
3
INDEFINITE
1,000
10
2
10,000
2,000
200
100
50
20
10
5
2
500
20 100 1,000 10,000
IMPULSE DURATION (μs)
SURGE CURRENT (A)
1
2
10
4
10
5
10
6
MODEL SIZE 20mm
V385LA40B(P) - V1000LA160B(P)
10
3
INDEFINITE
1,000
10
2
15
5,000
1
FIGURE 10.CLAMPING VOLT AGE FOR V130LA20A
(P)
- V275LA40A
(P)
3,000
2,000
1,000
900
800
700
600
500
400
300
200
10
-3
10-210
-1
10010110
2
10
4
MAXIMUM PEAK VOLT S (V)
PEAK AMPERES (A)
10
3
V275LA40A(P)
V250LA40A(P)
V150LA20A(P)
V130LA20A(P)
V175LA20A(P)
MAXIMUM CLAMPING VOLTAG E
MODEL SIZE 20mm
130 TO 275V
M(AC)
RATING
T
A
= -55oC TO 85oC
3,000
2,000
500
200
10
-310-210-1100101102
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
1,000
10
3
MAXIMUM CLAMPING VOLTAG E
MODEL SIZE 20mm
140 TO 230V
M(AC)
RATING
T
A
= -55oC TO 85oC
300
V140LA20A(P)
V230LA40A(P)
FIGURE 9. CLAMPING VOLTAGE FOR V385LA20A(P) -
V1000LA80A
(P)
FIGURE 10.CLAMPING VOLT AGE FOR V130LA20A(P) - V275LA40A(P)
5,000
3,000
1,000
500
300
10
-310-210-1100101102
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
2,000
10
3
10
-4
V1000LA80A(P)
V660LA50A(P)
MAXIMUM CLAMPING VOLTAG E
MODEL SIZE 14mm
385 TO 1000V
M(AC)
RATING
T
A
= -55oC TO 85oC
700
V625LA40A(P)
3,000
2,000
1,000
900
800
700
600
500
400
300
200
10
-3
10
-2
10-110010110
2
10
4
MAXIMUM PEAK VOLT S (V)
PEAK AMPERES (A)
10
3
V275LA40A(P)
V250LA40A(P)
V150LA20A(P)
V130LA20A(P)
V175LA20A(P)
MAXIMUM CLAMPING VOLTAG E
MODEL SIZE 20mm
130 TO 275V
M(AC)
RATING
T
A
= -55oC TO 85oC
3,000
2,000
1,000
900
800
700
600
500
400
300
200
10
-3
10-210
-1
10010110
2
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
10
3
V275LA40B(P)
V250LA40B(P)
V130LA20B(P)
V150LA20B(P)
MAXIMUM CLAMPING VOLTAG E
MODEL SIZE 20mm
130 TO 275V
M(AC)
RATING
T
A
= -55oC TO 85oC
3,000
2,000
500
200
10
-310-210-1100101
10
2
10
4
MAXIMUM PEAK VOLTS (V)
PEAK AMPERES (A)
1,000
10
3
MAXIMUM CLAMPING VOLTAG E
MODEL SIZE 20mm
140 TO 230V
M(AC)
RATING
T
A
= -55oC TO 85oC
300
V140LA20A(P)
V230LA40A(P)
V680LA80A(P)
V575LA40A(P)
V510LA40A(P)
V480LA40A(P)/V460LA20A(P)
V420LA20A(P)
V385LA20A(P)
3,000
2,000
1,000
900
800
700
600
500
400
300
200
10
-3
10-210-110010110
2
10
4
MAXIMUM PEAK VOLT S (V)
PEAK AMPERES (A)
10
3
V275LA40A(P)
V250LA40A(P)
V150LA20A(P)
V130LA20A(P)
V175LA20A(P)
MAXIMUM CLAMPING VOLTAG E
MODEL SIZE 20mm
130 TO 275V
M(AC)
RATING
T
A
= -55oC TO 85oC
Radial Lead Varistors > LA Varistor Series
Maximum Clamping Voltage for 20mm Parts
V130LA20A(P) - V275LA40A(P)
Figure 14 Figure 15
V130LA20B(P) - V275LA40(P)
Figure 16
V130LA20A(P) - V275LA40A(P)
Figure 17
NOTE: If pulse ratings are exceeded, a shift of V
+/-10% could result. This type of shift, which normally results in a decrease of V
result in the device not meeting the original published specifications, but does not prevent
the device from continuing to function, and to provide ample protection.
(at specified current) of more than
N(DC)
, may
N(DC)
V300LA40A - V1000LA160B
Repetitive Surge Capability for 20mm Parts
V130LA20A(P) - V320LA40B(P)
Figure 18
V385LA40B(P) - V1000LA160B(P)
Figure 19
Note: Repetitive surge capability is qualified and tested based on 8/20us current waveform
(not combination waveform) and UL1449 40.7.3 (Edition 4) test condition.
Specifications are subject to change without notice.
© 2018 Littelfuse, Inc.
Revised: 12/12/18
Page 9
Metal-Oxide Varistors (MOVs)
300
S)
TEMPERATURE (ºC)
300
4
TEMPERATURE (ºC)
Radial Lead Varistors > LA Varistor Series
Wave Solder Profile
Non Lead–free Profile
250
200
150
100
50
0
00.5 11.5 22.5 33.5 4
Figure 20 Figure 21
Maximum Wave 240C
TIME(MINUTE
Physical Specifications
Lead Material Copper Clad Steel Wire
Lead–free Profile
250
200
150
100
Environmental Specifications
Operating Ambient
Temperature Range
Soldering
Characteristics
Insulating Material
Device Labeling
Solderability per MIL–STD–202,
Method 208
Cured, flame retardant epoxy polymer
meets UL94V–0 requirements
Marked with LF, voltage, UL/CSA logos,
and date code
Storage Temperature Range -55°C to +125°C
Humidity Aging
Thermal Shock
Solvent Resistance MIL–STD–202, Method 215
Maximum Wave 260C
50
0
00.5 11.5 22.5 33.5
TIME(MINUTES)
-55°C to +85°C
+85°C, 85% RH, 1000 hours
+/-10% typical voltage change
+85°C to -40°C 5 times
+/-10% typical voltage change
Moisture Sensitivity Level 1, J-STD-020
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/12/18
Page 10
Product Dimensions (mm)
SYMBOL
VOLTAGE
MODEL
VARISTOR MODEL SIZE
7mm10mm 14mm 20mm
MIN MAX MIN MAX MIN MAX MIN MAX
AV130LA-
V320LA
-
-
12
(0.472)
-
-
16
(0.630)
-
-
20
(0.787)
-
-
26.5
(1.043)
V385LA-
V1000LA
-
-13(0.0512)--
17
(0.689)
-
-
20.5
(0.807)
-
-
28
(1.102)
øDAll -
-
9 (0.354) -
-
12.5
(0.492)
-
-
17
(0.669)
-
-
23
(0.906)
eAll 4 (0.157)6 (0.236) 6.5
(0.256)
8.5
(0.335)
6.5
(0.256)
8.5
(0.335)
6.5
(0.256)
(Note 2)
8.5
(0.335)
(Note 2)
e
1
V130LA-
V320LA
1.5
(0.059)
3.5
(0.138)
1.5
(0.059)
3.5
(0.138)
1.5
(0.059)
3.5
(0.138)
1.5
(0.059)
3.5
(0.138)
V385LA-
V1000LA
2.5
(0.098)
5.5
(0.217)
2.5
(0.098)
5.5
(0.217)
2.5
(0.098)
5.5
(0.217)
2.5
(0.098)
5.5
(0.217)
E V130LA-
-
5.6
-
5.6
-
5.6
-
5.6
*
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > LA Varistor Series
SEATING
PLANE
A
TRIM
L
TRIM
CRIMPED AND TRIMMED LEAD
Crimped leads are standard on LA types supplied in tape and reel
and are denoted by the model letter "T." Model letter "S" denotes
straight leads and letter "U" denotes special under-crimped leads.
*Seating plane interpretation per IEC-717
7mm Size 10mm Size 14mm Size 20mm Size
Min.
mm (in)
Max.
mm (in)
Min.
mm (in)
Max.
mm (in)
Min.
mm (in)
Max.
mm (in)
Min.
mm (in)
mm (in)
- 12 (0.472) - 16 (0.630) - 20 (0.787) - 26.5 (1.043)
- 13 (0.512) - 17 (0.689) - 20.5 (0.807) - 28 (1.102)
Max.
Dimension
A
V
RMS
Voltage
Model
V130LA-
V320LA
V385LA-
V1000LA
ØD All - 9 (0.354) - 12.5 (0.492) - 17 (0.669) - 23 (0.906)
e All 4 (0.157) 6 (0.236) 6.5 (0.256) 8.5 (0.335) 6.5 (0.256) 8.5 (0.335)
V130LA-
e
1
V320LA
V385LA-
V1000LA
V130LA-
V320LA
V385LA-
E
V510LA
V550LA-
V680LA
1.5 (0.059) 3.5 (0.138) 1.5 (0.059) 3.5 (0.138) 1.5 (0.059) 3.5 (0.138) 1.5 (0.059) 3.5 (0.138)
2.5 (0.098) 5.5 (0.217) 2.5 (0.098) 5.5 (0.217) 2.5 (0.098) 5.5 (0.217) 2.5 (0.098) 5.5 (0.217)
- 5.6 (0.220) - 5.6 (0.220) - 5.6 (0.220) - 5.6 (0.220)
- 7.3 (0.287) - 7.3 (0.287) - 7.3 (0.287) - 7.3 (0.287)
- 8.3 (0.327) - 8.3 (0.327) - 8.3 (0.327) - 8.3 (0.327)
6.5 (0.256)
(Note 2)
8.5
(Note 2)
V1000LA - - - - - 10.8 (0.425) - 10.8 (0.425)
Øb
A
TRIM
L
TRIM
Notes :
1. Dimensions in millimeters, (inches) in parentheses.
2. 10mm (9mm Min. & 11mm Max.) ALSO AVAILABLE; see additional lead style options
3. 1000V parts supplied with lead wire of diameter 1.00 -/+ 0.05 (0.039 -/+ 0.002)
4. 'A' Max. for V1000LC80A (P) = 24.00 (0.945”)
All
(Note 3)
All - 15 (0.591) - 19.5 (0.768) -
All 2.41 (0.095) 4.69 (0.185) 2.41 (0.095) 4.69 (0.185) 2.41 (0.095) 4.69 (0.185) 2.41 (0.095) 4.69 (0.185)
0.585
(0.023)
0.685
(0.027)
0.76 (0.030) 0.86 (0.034) 0.76 (0.030) 0.86 (0.034)
22.5 (0.886)
(NOTE 4)
0.76 (0.030)
(Note 2)
0.86 (0.034)
(Note 2)
- 29.0 (1.142)
Specifications are subject to change without notice.
© 2018 Littelfuse, Inc.
Revised: 12/12/18
Page 11
Metal-Oxide Varistors (MOVs)
Crimped Leads "ZT"
Crimped Leads "ZT"
P1
P0
E
DP
DH
DH
W1
W
F
t
W2W0
P
DP
C
Db
H0
DD0
H1
SEATING
PLANE
P2
P1
P0
W0
E
DP
DH
DH
W1
W
F
t
W2
P
DP
C
Db
H0
DD0
H1
SEATING
PLANE
P2
P0
DH
E
DH
DP
W1
W
F
t
W2
P
DP
Db
H
DD0
H1
P1
P2
W0
Crimped Leads "ZT"
P1
P0
W0
E
DP
DH
DH
W1
W
F
t
W2
P
DP
C
Db
H0
DD0
H1
SEATING
PLANE
P2
Crimped Leads "ZT"
Crimped Leads "ZT"
Straight Leads "ZS"
Straight Leads "ZS"
P1
P0
E
DP
DH
DH
W1
W
F
t
W2W0
P
DP
C
Db
H0
DD0
H1
SEATING
PLANE
P2
P1
P0
W0
E
DP
DH
DH
W1
W
F
t
W2
P
DP
C
Db
H0
DD0
H1
SEATING
PLANE
P2
P0
DH
E
DH
DP
W1
W
F
t
W2
P
DP
Db
H
DD0
H1
P1
P2
W0
P1
P0
P2
DH
E
DH
DP
W1
W
F
t
W2W0
P
DP
Db
H
DD0
H1
H
P0
U
DH
E
DH
DP
W1
W
F
t
W2
P
DP
Db
Ho
DD0
H1
P2
W0
P1
Crimped Leads "ZT"
Straight Leads "ZS"
P1
P0
W0
E
DP
DH
DH
W1
W
F
t
W2
P
DP
C
Db
H0
DD0
H1
SEATING
PLANE
P2
P0
DH
E
DH
DP
W1
W
F
t
W2
P
DP
Db
H
DD0
H1
P1
P2
W0
P1
P0
W0
E
DP
DH
DH
W1
W
F
t
W2
P
DP
C
Db
H0
DD0
H1
SEATING
PLANE
P2
Radial Lead Varistors > LA Varistor Series
Tape and Reel Specifications
(Dimensions presented on following page.)
7mm Devices 10, 14 and 20mm Devices
CRIMPED LEADS "LT" CRIMPED LEADS "LT"
P2
SEATING
H1
PLANE
H0
H
1
H
DD0
1
Ho
DD0
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/12/18
DD0
P1
P0
P2
P1
P0
UNDER-CRIMPED LEADS "LU" UNDER-CRIMPED LEADS "LU"
P2
P1
P0
P
DP
C
Db
STRAIGHT LEADS "LS" STRAIGHT LEADS "LS"
P
DP
Db
P
DP
Db
P
DP
C
Db
F
P
DP
Db
F
P
DP
Db
F
SEATING
PLANE
P2
P1
P0
P2
P1
P0
P2
P1
P0
E
DP
DH
F
DP
DH
F
DP
DH
F
DH
H1
W1
W2W0
W
t
E
DH
t
E
DH
U
t
W1
W2W0
W
W1
W2W0
W
H0
DD0
H1
H
DD0
H1
Ho
DD0
E
DP
DH
DP
DP
DH
DH
W1
W2
W0
W
t
E
DH
DH
W0
W1
W2
W
t
E
DH
U
W0
W1
W2
W
t
Page 12
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > LA Varistor Series
Tape and Reel Specifications (continued)
• Can be supplied to IEC Publication 286-2
• Radial devices on tape are supplied with crimped leads, straight leads, or under-crimped leads
• 7mm parts are available on tape and reel up to 480 VAC only
• 10mm parts are available on tape and reel up to 510 VAC only
• 14mm and 20mm parts are available on tape and reel up to 550 VAC only
Symbol Description
7mm 10mm 14mm 20mm
Model Size
P Pitch of Component 12.7 +/- 1.0 25.4 +/- 1.0 25.4 +/- 1.0 25.4 +/- 1.0
Feed Hole Pitch 12.7 +/- 0.2 12.7 +/- 0.2 12.7 +/- 0.2 12.7 +/- 0.2
P
0
Feed Hole Center to Pitch 3.85 +/- 0.7 8.85 +/- 0.7 8.85 +/- 0.7 8.85 +/- 0.7
P
1
Hole Center to Component Center 6.35 +/- 0.7 12.7 +/- 0.7 12.7 +/- 0.7 12.7 +/- 0.7
P
2
F Lead to Lead Distance 5.0 +/- 0.8 7.5 +/-0.8 7.5 +/- 0.8 7.5 +/- 0.8
h Component Alignment 2.0 Max 2.0 Max 2.0 Max 2.0 Max
W Tape Width 18.0 +1.0 / -0.5 18.0 +1.0 / -0.5 18.0 +1.0 / -0.5 18.0 +1.0 / -0.5
Hold Down Tape Width 12.0 +/- 0.3 12.0 +/- 0.3 12.0 +/- 0.3 12.0 +/- 0.3
W
0
Hole Position 9.0 +0.75 / -0.50 9.0 +0.75 / -0.50 9.0 +0.75 / -0.50 9.0 +0.75 / -0.50
W
1
Hold Down Tape Position 0.5 Max 0.5 Max 0.5 Max 0.5 Max
W
2
Height from Tape Center to
H
Component Base
Seating Plane Height 16.0 +/- 0.5 16.0 +/- 0.5 16.0 +/- 0.5 16.0 +/- 0.5
H
0
Component Height 32.0 Max 36.0 Max 40.0 Max 46.5 Max
H
1
Feed Hole Diameter 4.0 +/- 0.2 4.0 +/- 0.2 4.0 +/- 0.2 4.0 +/- 0.2
D
0
18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0
T Total Tape Thickness 0.7 +/- 0.2 0.7 +/- 0.2 0.7 +/- 0.2 0.7 +/- 0.2
U Under-crimp Width 8.0 Max 8.0 Max 8.0 Max 8.0 Max
P Component Alignment 3° Max 1.00mm 3° Max 1.00mm 3° Max 1.00mm 3° Max
NOTE: Dimensions are in mm.
Standard Bulk Pack Quantity
Standard Bulk Pack Quantity
Varistor Voltage Model
7mm 10mm 14mm 20mm
130-275 1500 1000 700 500
300-460 1500 1000 600 400
510-625 1500 1000 500 400
660 N/A 1000 500 400
680 N/A 1000 400 300
1000 N/A N/A 300 200
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and
test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications.
Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.
Varistor Model Size
Specifications are subject to change without notice.
© 2018 Littelfuse, Inc.
Revised: 12/12/18
Page 13
Metal-Oxide Varistors (MOVs)
V
(Thr
SERIES +
DESIGNA
(See BASE
Radial Lead Varistors > LA Varistor Series
Part Numbering System
(See Ratings & Specifications tables and notes below)
BASE PART CODES
V XXXX LA X
For “VARISTOR”
M(AC)
ee or four digits -- 130V to 1,000V)
PACKAG ING / LEAD STYLE
TOR
LA = Bulk Pack / Straight Leads (standard)
LC = Bulk Pack / Crimped and Trimmed Leads
LS = Ta pe and Reel / Straight Leads
LT = Tape and Reel / Crimped Leads
LU = Tape and Reel / Under-Crimped Leads
RELATIVE ENERGY INDICATOR
(One or Two Digits)
CLAMP VOLTAGE VARIANT
(One digit, where applicable)
LEAD-FREE, HALOGEN-FREE AND
RoHS COMPLIANT INDICATOR
COPPER ELECTRODE
PART CODES notes below)
XX
OPTION CODES
(See notes below)
P
XXXXX
W
See OPTIONS CODES notes below
For standard parts, use the BASE PART designator only.
For parts with non-standard options (such as additional form, packaging
and lead space options), use BASE PART + OPTION CODE.
OPTION CODE items are subject to availability and minimum order
requirements. Please contact a Littelfuse products representative for
additional information or questions
Ordering Notes:
BASE PART CODES: OPTION CODES:
Series + Packaging / Lead Style Designators:
Ordering examples:
Straight
Lead
Bulk Pack
(standard)
V130LA2P V130LS2P V130LT2P V130LC2P V130LU2P
Crimped leads are standard on LA Series varistors supplied in
tape and reel, denoted with "LT." For crimped leads without
trimming and any varitions other than that described above,
please contact Littelfuse.
Littelfuse LA Series varistors are shipped standard in bulk pack
with straight leads and lead spacing outlined in the Package
Dimensions section of this data sheet. Contact your Littelfuse
sales representative to discuss non-standard options.
Straight
Lead
Tape &
Reel
Crimped
Lead
Tape &
Reel
Crimped &
Trimmed
Lead
Bulk Pack
Under-
Crimp
Lead
Tape &
Reel
X10: 10mm lead spacing option -For 10 (-/+1) mm lead spacing (available on 20mm
diameter models only), append standard model
BASE PART number with "X10." Example:
Standard Model Order As
V130LA20AP V130LA20APX10
X2855: Nickel Barrier coated wire option --
All standard parts use tinned copper clad steel wire.
Nickel Barrier coated wire is available as an option,
consisting of Copper wire with a flashing of Nickel
followed by a top coating of Tin. To order append standard
model BASE PART number with "X2855." Example:
Standard Model Order As
V130LA20AP V130LA20APX2855
X1347: Hi-Temperature phenolic coating option --
Phenolic Coated LA Series devices are available with improved
maximum operating maximum temperature of 125°C.
To order, add X1347 to end of part number
(Example: V230LA20APX1347).
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/12/18
For additional information please refer to the section labeled
"Phenolic Coating Option" on the third page of this document
under the "Electrical Characteristics" table.
Loading...