Datasheet UG-156 Datasheet (ANALOG DEVICES)

Evaluation Board User Guide

One Technology Way • P. O . Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel : [phone] • Fax : [phone] • www.analog.com

UG-156

Evaluation Board for Dual, High Speed Operational Amplifiers

(8-Lead SOIC and Exposed Paddle)

FEATURES

Enables quick breadboarding/prototyping
User-defined circuit configuration
Edge-mounted SMA connector provisions
Easy connection to test equipment and other circuits
Two independent op amp configurations
Instrumentation amplifier configuration capable

GENERAL DESCRIPTION

The EB-O8RE-2Z is designed to aid in the evaluation of dual, high
speed operational amplifiers. The EB-O8RE-2Z is a bare board
(that is, there are no components soldered to the board) that enables
users to quickly prototype a variety of operational amplifier circuits,
which minimizes risk and reduces time to market. The EB-O8RE-2Z
evaluation board supports any of the Analog Devices, Inc., dual,
high speed operational amplifiers in an 8-lead SOIC package with
an exposed paddle.

Figure 1 shows the component side of the evaluation board, and
Figure 2 shows the circuit side of the evaluation board. Figure 3
shows the evaluation board schematic.

The 4-layer evaluation board accepts edge-mounted SMA
connectors on both inputs and outputs, which allows efficient
and quick connection to test equipment or other circuitry.

The board ground plane, component placement, and power
supply bypassing are optimized for maximum circuit flexibility
and performance. The evaluation board uses a variety of SMT
component case sizes: 0402, 0508, 0603, and 7343.

Figure 4 and Figure 6 show the evaluation board assembly drawings.
Figure 5 and Figure 7 show the metal layout pattern for connecting
the board to the op amp and to the supporting circuitry.

EVALUATION BOARD COMPONENT AND CIRCUIT SIDE DIAGRAMS

Figure 1. EB-O8RE-2Z Component Side of Evaluation Board

09133-001

Figure 2. EB-O8RE-2Z Circuit Side of Evaluation Board

09133-002

PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.

Rev. 0 | Page 1 of 8

UG-156 Evaluation Board User Guide

TABLE OF CONTENTS

Features .............................................................................................. 1

General Description ......................................................................... 1

Evaluation Board Component and Circuit Side Diagrams ......... 1

Revision History ............................................................................... 2

REVISION HISTORY

5/10—Revision 0: Initial Version

Evaluation Board Schematic, Assembly Drawings, and Board

Layouts ................................................................................................3

Ordering Information .......................................................................5

Bill of Materials ..............................................................................5



Rev. 0 | Page 2 of 8

Evaluation Board User Guide UG-156

EVALUATION BOARD SCHEMATIC, ASSEMBLY DRAWINGS, AND BOARD LAYOUTS

JPSLD02

2

1

JP1

–VS

JP2

EPAD

PWR

1

JPSLD02

2

1

*

MOLEX22-23-2031

3

2

*

*

*

*

*

*

*

*

*

*

09133-003

LAB-BOARD

UNIV DUAL HI G H S P E E D O P AM P EVAL BD

AGND

+VS

–VS

SOIC-2R

*

*USER-DEFINED VALUE.

*

*

*

*

*

*

*

*

*

*

*

Figure 3. EB-O8RE-2Z Universal Evaluation Board Schematic

Rev. 0 | Page 3 of 8

UG-156 Evaluation Board User Guide

Figure 4. Board Assembly Drawing, Component Side

Figure 5. Board Layout Pattern, Component Side

09133-004

Figure 6. Board Assembly Drawing, Circuit Side

9133-005

Figure 7. Board Layout Pattern, Circuit Side

09133-006

09133-007

Rev. 0 | Page 4 of 8

Evaluation Board User Guide UG-156

ORDERING INFORMATION

BILL OF MATERIALS

Table 1.

Quantity Reference Designator Description Package

6 IN1+, IN1−, OUT1, IN2+, IN2−, OUT2 SMA/SMT SMA/SMT
5 C3, C4, C5, C8, C9 User-defined capacitor C0402
2 C6, C7 0.01 μF capacitor C0402
2 C10, C11 0.1 μF capacitor C0508
2 C1, C2 10 μF capacitor C6032
18 R1 to R18 User-defined resistor R0402
6 GND1, GND2, GND3, GND4, +VS, −VS Test point TP
1 PWR Header 3 POS Molex 22-23-2031
2 JP1, JP2 User-defined jumper Solder jumper
1 U1 Amplifier 8-lead SOIC

Rev. 0 | Page 5 of 8

UG-156 Evaluation Board User Guide

NOTES

Rev. 0 | Page 6 of 8

Evaluation Board User Guide UG-156

NOTES

Rev. 0 | Page 7 of 8

UG-156 Evaluation Board User Guide

NOTES

ESD Caution
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection

circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.

Legal Terms and Conditions

By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions
set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you
have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.
(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,
temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided
for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional
limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term
“Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including
ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may
not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to
promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any
occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.
Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice
to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO
WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED
TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL
PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF
THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE
AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable
United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of
Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby
submits to the pers onal jurisdiction and venu e of such courts. The United Nations Conventi on on Contracts for the Internation al Sale of Goods shall not apply to this Agreement and is expressly disclaimed.

©2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG09133-0-5/10(0)

Rev. 0 | Page 8 of 8