Datasheet UG-102 Datasheet (ANALOG DEVICES)

Evaluation Board User Guide

UG-102

One Technology Way • P. O . Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel : [phone] • Fax : [phone] • www.analog.com

Evaluation Board for Single High Speed Selectable Gain Differential Amplifiers

(16-Lead, 3 mm × 3 mm LFCSP)

FEATURES

Enables quick breadboarding/prototyping
Selectable gain of 1, 2, or 3
Edge-mounted SMA connector provisions
Easy connection to test equipment and other circuits

GENERAL DESCRIPTION

The EB-D16CP33SG-1Z is designed, to aid in the evaluation
of single high speed, selectable gain differential amplifiers. It
has the flexibility to choose between the gain of 1, 2, or 3.
The EB-D16CP33SG-1Z is a bare board (that is, there are
no components soldered to the board) that enables users to
quickly prototype a variety of differential amplifier circuits,
which minimizes risk and reduces time to market. The
EB-D16CP33SG-1Z evaluation board supports any of
Analog Devices, Inc., single high speed differential amplifiers
in 3 mm × 3 mm lead frame chip scale packages (LFCSP).

Figure 1 and Figure 2 show the component side and circuit side
of the evaluation board. Figure 3 shows the evaluation board
schematic.

The 4-layer evaluation board accepts edge-mounted SMA con­nectors on both inputs and outputs, which allows efficient and
quick connection to test equipment or other circuitry.

The board ground plane, component placement, and power
supply bypassing have been optimized for maximum circuit
flexibility and performance. The evaluation board uses a variety
of SMT component case sizes: 0508, 0603, and 7343.

Figure 4 and Figure 6 show the evaluation board assembly
drawings. The metal layout pattern for connecting the board
to the op amp and to the supporting circuitry is shown in
Figure 5 and Figure 7.

DIGITAL PICTURES OF THE EVALUATION BOARD

NOTES

1. THE EVALUATION BOARD SI LKSCREEN PART NUMBER
LABELING ON Y OUR BOARD MAY BE DIFFERENT FROM
WHAT IS SHOWN HERE.

Figure 1. Component Side of PCB Figure 2. Circuit Side of PCB

08886-001

NOTES

1. THE EVALUATION BOARD SILKSCREEN PART NUMBER
LABELING ONY OUR BOARD MAY BE DIFFERENT FROM
WHAT IS SHOWN HERE.

08886-007

PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.

Rev. 0 | Page 1 of 8

UG-102 Evaluation Board User Guide

TABLE OF CONTENTS

Features .............................................................................................. 1

General Description ......................................................................... 1

Digital Pictures of the Evaluation Board ....................................... 1

REVISION HISTORY

4/10—Revision 0: Initial Version

Revision History ................................................................................2

Evaluation Board Schematic ............................................................3

Assembly Drawing and Board Layout ............................................4

Rev. 0 | Page 2 of 8

Evaluation Board User Guide UG-102

0

EVALUATION BOARD SCHEMATIC

J3

1

5432

/

1

AGND

*

-VS

BLU

-VS

1

NP

C4

C2

10UF

.1UF

8886-002

AGND

J6

1

5432

JOHNSON142- 0701- 851

VO C M

BLU

JOHNSON142- 0701- 851

JOHNSON142- 0701- 851

AGND

J4

1

5432

AGND

J5

1

5432

JOHNSON142- 0701- 851

1

AGND

AGND

R9

*

R7

*

121110

/

+OUT-INA

-OUT

-VS

-VS

-VS

-VS+VS

+I NA

+I NB

1

9

VOCM

+VS

8

+VS

7

+VS

6
5

-INB

432

U1

13
14
15
16

PAD

AGND

R10

*

R8

*

AGND AGND

*

.1UF

C5

AGND

C1

.1UF

* USER-DEFINED VALUES

1

+VS

C3

10UF

NP

RED

AGND

+VS

AGND

+I NB

R3

R1

*

*

+I NA

*

-INA

AGND

-INB

R4

*

AGND

5R

1

J2

*

5432

AGND

JOHNSON142-0701-851

*

5432

1

AGND

J1

JOHNSON142-0701-851

Figure 3. Single Differential Amplifier Universal Evaluation Board Schematic

Rev. 0 | Page 3 of 8

UG-102 Evaluation Board User Guide

ASSEMBLY DRAWING AND BOARD LAYOUT

08886-005

8886-006

Figure 4. Board Assembly Drawing, Component Side

Figure 5. Board Layout Pattern, Component Side

08886-003

Figure 6. Board Assembly Drawing, Circuit Side

08886-004

Figure 7. Board Layout Pattern, Circuit Side

Rev. 0 | Page 4 of 8

Evaluation Board User Guide UG-102

NOTES

Rev. 0 | Page 5 of 8

UG-102 Evaluation Board User Guide

NOTES

Rev. 0 | Page 6 of 8

Evaluation Board User Guide UG-102

NOTES

Rev. 0 | Page 7 of 8

UG-102 Evaluation Board User Guide

NOTES

ESD Caution
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection

circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.

Legal Terms and Conditions

By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions
set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you
have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.
(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,
temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided
for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional
limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term
“Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including
ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may
not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to
promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any
occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.
Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice
to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO
WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED
TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL
PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF
THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE
AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable
United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of
Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby
submits to the pers onal jurisdiction and venu e of such courts. The United Nations Conventi on on Contracts for the Internation al Sale of Goods shall not apply to this Agreement and is expressly disclaimed.

©2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG08886-0-4/10(0)

Rev. 0 | Page 8 of 8