Datasheet UDN2982AT Specification

2981 2982

8-CHANNEL SOURCE DRIVERS

AND

Data Sheet

29310F

UDN2981A

1

2

3

4

5

6

7

8

V

S

Note that the UDN2980A series (dual in-line package) and UDN2980LW series (small-outline IC package) are electrically identical and share a common terminal number assignment.

18

17

16

15

14

13

12

11

GND

Dwg. No. A-10, 243

ABSOLUTE MAXIMUM RATINGS

at 25°C Free-Air Temperature

Output Voltage Range, VCE. . . . . . 5 V to 50 V

Input Voltage, V

UDN2981A. . . . . . . . . . . . . . . . . . . . . . . .

UDN2982A, UDN2982LW, and,

A2982SLW . . . . . . . . . . . . . . . . . . . . . . .

Output Current, I Package Power Dissipation,

P

. . . . . . . . . . . . . . . . . . . . . . . See Graph

D

Operating Temperature Range,

TA . . . . . . . . . . . . . . . . . . . . -20°C to +85°C

Storage Temperature Range,

T

. . . . . . . . . . . . . . . . . . . -55°C to +150°C

S

IN

. . . . . . . . . . . . . . -500 mA

OUT

15 V

20 V

Recommended for high-side switching applications that benefit from separate logic and load grounds, these devices encompass load supply voltages to 50 V and output currents to -500 mA. These 8-channel source drivers are useful for interfacing between low-level logic and high-current loads. Typical loads include relays, solenoids, lamps, stepper and/or servo motors, print hammers, and LEDs.

All devices may be used with 5 V logic systems — TTL, Schottky TTL, DTL, and 5 V CMOS. The UDN2981A, UDN2982A, and A2982SLW are electrically interchangeable, will withstand a maximum output off voltage of 50 V, and operate to a minimum of 5 V. All devices in this series integrate input current limiting resistors and output transient suppression diodes, and are activated by an active high input.

The suffix ‘A’ (all devices) indicates an 18-lead plastic dual in-line package with copper lead frame for optimum power dissipation. Under normal operating conditions, these devices will sustain 120 mA continuously for each of the eight outputs at an ambient temperature of +50°C and a supply of 15 V.

The suffix ‘LW’ (UDN2982LW only) indicates an 18-lead surfacemountable wide-body SOIC package; the A2982SLW is provided in a 20-lead wide-body SOIC package with improved thermal characteristics.

The UDN2982A, UDN2982LW, and A2982SLW drivers are also available for operation over an extended temperature range to -40°C. To order, change the prefix ‘UDN’ to ‘UDQ’ or the suffix ‘SLW’ to ‘ELW’. These packages are available in Pb (lead) free variants (suffix ‘-T’), with 100% matte-tin leadframe plating.

FEATURES

■ TTL, DTL, PMOS, or CMOS Compatible Inputs

■ 500 mA Output Source Current Capability

■ Transient-Protected Outputs

■ Output Breakdown Voltage to 50 V

■ DIP or SOIC Packaging

Always order by complete part number, e.g., UDN2981A . Note that all devices are not available in all package styles.

2981

AND

2982

8-CHANNEL SOURCE DRIVERS

One of Eight Drivers

V

5

9

20 K

7.2 K

INP UT

1.5 K

G RO UN D

3 K

OU TP UT

Dwg. No. A-10, 242B

A2982SLW

2.5

1

2

3

4

5

6

7

20

19

18

17

16

15

14

2.0

1.5

1.0

18-PIN DIP , R

20-LE AD S OIC , R

18-LE AD S OIC , R

θJ A

= 60°C /W

θJA

= 90°C /W

θJA

= 94°C /W

C ONN EC TION

NO

2

8

13

0.5

9

S

10

NC

G ROU ND+V

12

NO

11

C ONN EC TION

Dwg. PP -06 4-2

115 Northea st C utoff, B ox 15036 Worcester, Mass achuse tts 01 615 -0036 (50 8) 853-5000 C opyright © 19 77, 2004 Allegro MicroS ys tems, Inc.

AL L OW AB LE P AC K AG E P OWE R D IS S IP AT ION IN W ATTS

0

25

50 75 100 125 150 AMB IE NT T EMP ER AT UR E IN °°C

Dwg. GP -02 2-4A

2981

AND

2982

8-CHANNEL

SOURCE DRIVERS

ELECTRICAL CHARACTERISTICS at T

= +25°C (unless otherwise specified).

A

Applicable Test Limits

Characteristic Symbol Devices Test Conditions Fig. Min. Typ. Max. Units

Output Leakage Current I Output Sustaining V

CEX

CE(SUS)

All VIN = 0.4 V*, VS = 50 V, TA = +70°C 1 — — 200 µA All I

= -45 mA — 35 — — V

OUT

Voltage Collector-Emitter V

CE(SAT)

Saturation Voltage V

Input Current I

IN(ON)

All VIN = 2.4 V, I

= 2.4 V, I

IN

VIN = 2.4 V, I

= -100 mA 2 — 1.6 1.8 V

OUT

= -225 mA 2 — 1.7 1.9 V

OUT

= -350 mA 2 — 1.8 2.0 V

OUT

UDN2981A VIN = 2.4 V 3 — 140 200 µA

VIN = 3.85 V 3 — 310 450 µA

2982† VIN = 2.4 V 3 — 140 200 µA

VIN = 12 V 3 — 1.25 1.93 mA

Output Source Current l (Outputs Open)

Supply Current I

OUT

S

UDN2981A VIN = 2.4 V, VCE = 2.0 V 2 -350 — — mA

2982† V

= 2.4 V, VCE = 2.0 V 2 -350 — — mA

IN

All VIN = 2.4 V*, VS = 50 V 4 — — 10 mA

Leakage Current Clamp Diode I Clamp Diode V Turn-On Delay t

R

F

ON

All VR = 50 V, VIN = 0.4 V* 5 — — 50 µA All IF = 350 mA 6 — 1.5 2.0 V All 0.5 EIN to 0.5 E

, RL = 100Ω, — — 0.3 2.0 µs

OUT

VS = 35 V

Turn-Off Delay t

OFF

All 0.5 EIN to 0.5 E

, RL = 100Ω, — — 2.0 10 µs

OUT

VS = 35 V, See Note

NOTES: Turn-off delay is influenced by load conditions. Systems applications well below the specified output loading may require

timing considerations for some designs, i.e., multiplexed displays or when used in combination with sink drivers in a totem pole configuration.

Negative current is defined as coming out of (sourcing) the specified device terminal. * All inputs simultaneously. † Complete part number includes a prefix (A or UDN) and a suffix (A or SLW) as follows:

UDN2981A, UDN2982A, UDN2982LW, or A2982SLW.

www.allegromicro.com

3

2981

OPEN

V

IN

I

S

mA

OPEN

V

I

F

V

AND

2982

8-CHANNEL SOURCE DRIVERS

Figure 1 Figure 2 Figure 3

V

S

V

IN

µA I

CEX

Dwg. No. A-11,083 Dwg. No. A-11,084 Dwg. No. A-11,085

TEST FIGURES

V

IN

V

S

V

CE

V

mA

I

OUT

Figure 4

V

S

I

mA

S

OPEN

V

IN

Dwg. No. A-11,086 Dwg. No. A-11,087 Dwg. No. A-11,088

Figure 5 Figure 6

V

S

I

R

µA

V

IN

4

115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000

500

Allowable peak collector current

as a function of duty cycle

Series UDN2980A

500

2981

AND

2982

8-CHANNEL

SOURCE DRIVERS

450

400

RECOMMENDED MAXIMUM OUTPUT CURRENT

350

300

250

200

150

100

ALLOWABLE PEAK COLLECTOR CURRENT IN mA AT 50°C

50

0

450

V = 35 V

S

10

NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY

30

20

7

8

50

40

PER CENT DUTY CYCLE

60

450

400

RECOMMENDED MAXIMUM OUTPUT CURRENT

350

3

300

3

4

5

250

6

200

150

100

ALLOWABLE PEAK COLLECTOR CURRENT IN mA AT 70°C

50

70

90

80

100

0

V = 35 V

S

10

NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY

30

20

PER CENT DUTY CYCLE

7

8

50

40

4

5

6

70

60

90

80

100

Dwg. No. A-11,111BDwg. No. A-11,106B

UDN2981A and UDN2982A

450

400

RECOMMENDED MAXIMUM OUTPUT CURRENT

350

300

250

200

150

100

ALLOWABLE PEAK COLLECTOR CURRENT IN mA AT 50°C

50

0

V = 15 V

S

10

NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY

30

20

www.allegromicro.com

7

8

50

40

PER CENT DUTY CYCLE

60

400

RECOMMENDED MAXIMUM OUTPUT CURRENT

350

3

4

5

6

70

90

80

100

Dwg. No. A-11,107B

300

250

5

200

150

100

ALLOWABLE PEAK COLLECTOR CURRENT IN mA AT 70°C

V = 15 V

S

50

0

10

0

NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY

30

20

PER CENT DUTY CYCLE

40

6

7

8

50

70

60

3

4

90

80

100

Dwg. No. A-11,108B

5

2981

ELECTRODES

AND

2982

8-CHANNEL SOURCE DRIVERS

2.5

2.0

IN

1.5

1.0

INPUT CURRENT, I (mA)

0.5

Input current as a function

of input voltage

MAXIMUM

TYPICAL

2

4

INPUT VOLTAGE (VOLTS)

6

8

10 12

Dwg. No. A-11,115B

IN

IN IN

IN V

Typical electrosensitive

printer application

R

1

2

3

4

5

6 7

8

S

1 2

3 4

5 6

7 8

9

18 17 16 15

14 13

12

11

10

L

R

L

R

L

R

L

R

L

R

L

R

L

R

L

Dwg. No. A-11,113A

6

115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000

0.280

0.240

18

UDN2981A and UDN2982A

Dimensions in Inches

(controlling dimensions)

10

2981

AND

2982

8-CHANNEL

SOURCE DRIVERS

0.014

0.008

0.430

MAX

0.300

BSC

0.210

MAX

7.11

6.10

0.015

MIN

18

1

0.070

0.045

0.022

0.014

0.920

0.880

0.100

BSC

9

0.005

MIN

0.150

0.115

Dwg. MA-001-18A in

Dimensions in Millimeters

(for reference only)

0.355

10

1

1.77

1.15

23.37

22.35

2.54

BSC

9

0.13

MIN

0.204

7.62

BSC

10.92

MAX

5.33

MAX

0.39

MIN

0.558

0.356

3.81

2.93

NOTES: 1. Exact body and lead configuration at vendor’s option within limits shown.

2. Lead spacing tolerance is non-cumulative.

3. Lead thickness is measured at seating plane or below.

4. Supplied in standard sticks/tubes of 21 devices.

www.allegromicro.com

Dwg. MA-001-18A mm

7

2981

D

AND

2982

8-CHANNEL SOURCE DRIVERS

UDN2982LW

(add “TR” to part number for tape and reel)

Dimensions in Inches

(for reference only)

18 10

0.0125

0.0091

0.2992

0.2914

0.020

0.013

0.0926

0.1043

7.60

7.40

1 2

0.0040

18

0.050

BSC

MIN.

3

0.4625

0.4469

Dimensions in Millimeters

(controlling dimensions)

10

0.419

0.394

10.65

10.00

0° TO 8°

0.050

0.016

wg. MA-008-18A in

0.32

0.23

1.27

0.40

0.51

0.33

2.65

2.35

1

0.10

2

MIN.

3

11.75

11.35

1.27

BSC

NOTES: 1. Exact body and lead configuration at vendor’s option within limits shown.

2. Lead spacing tolerance is non-cumetive.

3. Supplied in standard sticks/tubes of 41 devices or add “TR” to part number for tape and reel.

8

115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000

0° TO 8°

Dwg. MA-008-18A mm

A2982SLW

(add “TR” to part number for tape and reel)

Dimensions in Inches

(for reference only)

20 11

2981

AND

2982

8-CHANNEL

SOURCE DRIVERS

0.0125

0.0091

0.2992

0.2914

0.020

0.013

0.0926

0.1043

7.60

7.40

1 2

0.0040

20

0.050

BSC

MIN.

3

0.5118

0.4961

Dimensions in Millimeters

(controlling dimensions)

11

0.419

0.394

0.050

0.016

0° TO 8°

Dwg. MA-008-20 in

0.32

0.23

10.65

10.00

0.51

0.33

2.65

2.35

1

0.10

2

MIN.

3

13.00

12.60

1.27

BSC

NOTES: 1. Exact body and lead configuration at vendor’s option within limits shown.

2. Lead spacing tolerance is non-cumulative.

3. Supplied in standard sticks/tubes of 37 devices or add “TR” to part number for tape and reel.

www.allegromicro.com

1.27

0.40

0° TO 8°

Dwg. MA-008-20 mm

9

2981

AND

2982

8-CHANNEL SOURCE DRIVERS

10

The products described here are manufactured under one or more U.S. patents or U.S.

patents pending.

Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the information being relied upon is current.

Allegro products are not authorized for use as critical components in life-support devices or systems without express written approval.

The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for any infringement of patents or other rights of third parties which may result from its use.

115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000